Is it possible to create an individual variable time clock that is only useable by a specific workbook?
I have set up a calendar which has all days of the week in column 1, with start times in column 2 and end times in column 3. These times are adjustable on a daily basis.
Is it possible to create a macro that reads through the sheet and tells the workbook to disregard the system clock and use only the start and end times for each date stipulated in the table.
ie 7/9/06 has a start time of 6am and a finish of 6pm, not 0000 and 2400 as it would with the system clock?
I have a spreadsheet that I have combined the HH/MM/SS into one column and formatted it as time. If the numbers are negative then the - comes with it into the new column. I want to create a new column to calculate the negative numbers as zero and leave the positve numbers as they are.
Here is the formula that I used to combine the columns:
I'm trying to open a file on a network drive...but I'm getting the following error message when it opens: "This file may be read-only, or you may be trying to access a read-only location. Or the server the document is stored on may not be responding." Now, the file itself has no rights restrictions and is not read only. It doesn't appear to be locked.
Now, there are other Excel files in the same directory which I could open fine; however, the Excel documents having the above problem all have a little black icon "appears to be a padlock" (image attached) at the bottom left hand side of the Excel file icon. I tried the following:
- Renaming - Converting to a different file format (didn't work, it won't let me) - Opening in notepad...etc doesn't work.
This file is dated back in 2004...do you think it's corrupt? Is there anything i can do to open or recover this?
I've been trying to use IF OR and CONCATENATE to read 4 cells and give me a list of parts needed based on the data loaded in the 4 cells. I attached an example showing.
Excel 2003 > I am developing a comprehensive VBA function that needs to read the value of many cells in a worksheet. I don't want to Name all those cells because then I will need to pass too many variables to the function. I can use the following set of objects and properties ...
I have a lot of conditions, so I'm wondering whether there's any way I can read the the conditions from cells on a worksheet, so I don't have to type them in manually. In other words, I'd like to have the things inside the "{ }" be cell refrences.
What I'm trying to do is determine what the content is in a particular cell. In the spreadsheet, some of the cells are merged, some not. I'm using ActiveCell to read the content of the normal cells, but its not working for merged cells.
I have a combobox "cboRCAname" that is populated with a list of names from a dynamic range "RCA_Name" in a worksheet.
If a user selects an item in the combobox from RCA_Name, I want to display the a code that corresponds to that name. The codes are stored in a coulmn adjacent to "RCA_Name"
'Populate the combo box with the dynamic RCA list Dim rngRCA As Range Dim ws As Worksheet Set ws = Worksheets("RCA_Data")
I made the formula work great, however I want to cut it down and simplify it and make it easier to manipulate... as opposed to having the filename written every so many times.. replace with a loop instead.... so:
Private Sub Weeklytestt_Click() Dim varCurDate As String If DateYesterday.Value = True Then Answer = "1" If DateToday.Value = True Then Answer = "2" If DateTyped.Value = True Then Answer = "3"
Select Case Answer Case Is = "1" varCurDate = Format(Date, "yyyymmdd") varCurDate = varCurDate - 1 Case Is = "2" varCurDate = Format(Date, "yyyymmdd")..........
I am trying to rank a series of data. I have most of this figured out. However, the data that is being ranked is based on a sum of a range of cells. I have lines that are waiting for new information to be put in related to the values to be ranked and the value is reference a sum of blank cells currently since there is no data there and it is showing up as zero and therefore being ranked number 1 in my list. I basically want the ranking to rank the values 1-11 while putting all values that are zero to be put at the bottom of the ranking. Any way to do this without macros. I have been using the VLOOKUP and RANK functions for my ranking purposes.
I have tried using an if statement that made the cells #N/A if they were zero, however they remained at the top of my ranking.
I have a macro that copies time cells from another sheet and puts them in cells in another sheet, I also have another macro that takes 30 mins away from that time if a certain condition is reached but it wont work unless i retype over the copied cell.
I am trying to get two cells to be used to adjust other cells on the same sheet repeated times.
In a inventory sheet I have 5 columns as such , A1 previous balance, B1 Qty received, C1 qty on hand, D1 last cost, E1 current avg cost What I want, is to be able to enter my weekly received items in the B1 Qty received and the new cost in D1 Last cost cells and have them calculate my current average E1 and update my qty on hand C1 total. This in itself is not the biggest challenge. I was asking if there is a way that after the E1 current average cost and C1 qty on hand are updated by that formula, that the next time I enter a new B1 qty received and new cost in D1 Last cost cell they will update again basically without changing the earlier calculations achieved .
Example: Today I have item X with a A1 previous balance of 10 , with a D1 last cost of $1, and E1 current avg cost $1
I want to receive B1 10 more today at $.50 D1 last cost, which ideally would end up showing
A1 previous 10 (or 20 if adding) , C1 Qty on hand 20, D1 Last cost .5, E1 current avg $.75
Next week I want to receive B1 10 more at $.25 D1 last cost , which then would update showing
A1 previous balance 10 (or 30 if adding), Qty on hand 30, Last cost $.25 and E1 current avg $.58
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I have reviewed many a thread today looking up how to color in cells c11 through c20 without conditional formating.
if these cells have a time less than 01:00 then they turn green if these cells have a time greater than 01:00 then they turn red if the time is equal to 01:00 then they turn white.
I am trying to add a ROW of times. Each cell of times is using the 00":"00 format so I don't have to type a colon between the hours:minutes.
I'm not sure of what the formula should be for the Total Hours box.
For example, if I were to type 13:45 in the start time & 14:00 in the end time, I am getting a result of 0:55 which is incorrect
Another example if I leave the first 2 start/end boxes empty(blank) and then type 15:30 Start & 17:00 in the second set of Start/end boxes, I get a Total Hours of 1:70 which is also incorrect.
The formula I have in the Total Hours box is =SUM(B12-A12)+(D12-C12) which is know is incorrect.
What is the correct formula which will give me a Total Hours which adds a row of times correctly?
I want 2 cells that are not next to each other and that contain times of day to highlight only if the times overlap, I cant figure out how to make the conditional formatting do this...
Attached is a workbook with some sample data. All cells in column A have a unique value that should be applied towards all values in column B corresponding to that cell in column A. For instance, A1 should apply towards all data in B1.
What I initially did is took all the values in column B and put them into a separate worksheet (this information is on sheet 2 of attached workbook) and used the text to columns to separate them into individual cells, but still horizontally.
What I need is for the macro to take all data in one row, copy paste special values transpose (to vertical) into column B of sheet 3. THEN (here's where I can't seem to get it...) I need that corresponding unique value from sheet 1, column A, to be copied and pasted into sheet 3 and autofilled down for the number of values it corresponds with.
ok is there a way to have excel fill a certain number of cells with specific data specified X times? For example, the end result would look something like the pic below. The column on the right would change according to the numbers specified in the yellow column.
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
I'm looking for a formula that will calculate the difference in times between specific times while working with a 24 hr clock. Please see details below:
E3 provides the start time of 4:00 H3 provides an end time of 15:30
If an employee works betwen the hours of 0:00 (midnight) to 5:59, this is considered DIFF hours and is therefore the number I am seaking. So for the data noted above, the total DIFF hours worked is 2 hours.
I am trying to capture data for statistical analysis, but have hit a snag. As shown in attached sheet I have each day for the year broken down into hour time slots into which data will be added. As I will need to come up with a number of similar sheets in the future I was wondering if there is a way to automate through vba, a quick way to copy down the hour slots for each day, 365 times, rather than the laborious task of copy and paste manually.
I need to count how many times I've got, for instance, "a" in several cells where I typed some text...
I would need a formula where I can indicate the letter I want and the range of cells where to look at, and having as result how many occurances there are...
If you are very good instead of a single letter, maybe a sequence of letters... but this is an extra!
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
I have a spreadsheet used for calculating information based on the dates specific shifts are requested/cancelled by our clients. I have a formula for working out if a date & time of cancellation is less than 48hrs notice of the shift starting. This is because we have cancellation fees based on this.
What I have is this formula: =IF(A16="","",IF(INT(A16)-INT(G16)<2,1,"")) that returns a 1 if that shift is cancelled within 48hrs notice. This works fine but I have to now change the notice periods to the following:
edit this formula to take this into account? I figure it's using multiple IF's and changing the <2 into something else like the number of hours but I'm not sure of the exact syntax.
I am a research student trying to calculate the linearity of a certain number of individuals (the subjects of my study).
In my matrix of individuals I have the row individuals dominant to column individuals given values of 1, and where individuals in the column are dominant to those in the row, a value of 0 is given. Where the relationships are "tied" a value of 0.5 is entered. I have more than 30 unknown relationships, which I have filled with "x".
What I have to do, is select these x-cells (Haha, Excels :P) and randomly insert a 1-0 or 0-1 dyad between the corresponding individuals. So if (in the data file) Garth and Nala are to have a 1-0 or 0-1 inserted to their corresponding cells, but they must be opposite; like if row-Garth gets a 1 on column-Nala, then column-Garth gets a 0 on row-Nala.
I have highlighted (in the second matrix) all of the non-x cells. I have to make 10,000 matrices (or at least replicate the application of these random 1-0/0-1 dyads 10,000 times).
My goal is to take a list of times which are exported from a database into 1 cell and change the string in that cell to become a function that adds all the times....
