I'm working on a spreadsheet that has a counting number value on the cell L2 and a score on cell L4. These cells will be changed during the day, L2 always increasing, but not with a uniform increment. The interval between the changes also varies. Each time L2 changes, L4 may or not change. I'd like to keep the record of the changes on L2 and L4, each one in a row, together with the date and time when the changes where made to L2 and only add one new row if the L2 value has changed. The records should start from line 6 on...
See the attached file for more details. Currently I'm doing the updates to the record rows manually, I'd like to make it automatic every time the value of L2 is changed from the previous value to a new one.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$L$2" Then
If IsNumeric(Target) Then
'Stop any possible runtime errors and halting code
On Error Resume Next
'Turn off ALL events so the Target * 2 does not _
put the code into a loop.
Application.EnableEvents = False............
I am trying to create a continuously updating record or log of the numbers in a particular cell that has numbers that change frequently. I want every number that was every in that cell recorded in a table or column so I can analyze those numbers. Please note that I do not have much VBA experience.
I'm creating a mileage log for my work as a traveling art teacher. Most templates have you just input the number on the odometer when you started and when you finished. Since I can never remember to check the odometer when I am getting in and out of the car I thought it might be easier to just record the distance from each location once and then record that number of miles each trip. I usually travel the same route so the mileage is always the same.
I have an array of numbers right now, with 3 columns listing my 3 most common start locations. Then I have 5 rows listing the 5 schools I travel to for work, and the distances from each start to each end in the array. On a separate sheet I have my log.
What I would like to be able to do is select a start location and an end location from a drop down list on the log and have the number of miles automatically appear in the miles column. Then I can double this for the return trip and total it at the bottom and calculate my expense.
I am having trouble writing a formula that works for all 15 possible distances, and I don't quite know how to write it so that it references my array and finds the correct distance for those two specific choices. So far I have the drop down menu's pulling from the array but I'm stuck at how to index the array using the information that is coming from the drop down list.
Since I travel to these locations multiple times I think it would be a lot faster than looking up the distance every time and typing it up manually.
im trying to do is create a database of autocad drawings based on style of house number of bedrooms sq ft and if theres a garage. what i am wondering is how can i add a search function. for example i want to find a Cape with 2 bedrooms...i have all the information on the spreadsheet. what do i need to do to be able to search among the spread sheet without using the find function this is just the beginning of the data
Basically, I have a large spreadsheet with basic data including names, dates and a unique identifier number (UIN). I have created a questionnaire in a userform (with a UIN txtbox) and want to link the answers to the specific individuals on the worksheet.
i.e. If UIN 201 fills in the questionnaire on the userform it will enter the details on the spreadsheet next to the details already entered for UIN 201.
I have recorded (i.e. manually as opposed to writing VBA code) a number of macros to perform a routine, however they do not work when I change the filename.
Could someone please advise on how to edit these macros (which reference a specific filename) so that they work when the file name is changed. The macros copy and paste values from different worksheets and then run another set of macros. However all macros and worksheets are located within one excel file
I seek advice on using the value of NOW() as a record ID in an address book program. Question #1: Do Excel developers often use a record ID? Question #2: What record ID schemes are fequently employed besides date/time? I have decided to create an Excel address book as an exercise to increase my knowledge of VBA, and also as a useful application for work.
I realize that a record ID is not essential in Excel in the way that it is essential in Access, but I feel the need to have some unique ID associated with each address, so that I may have different worksheets, with data related to a given Contact, sort and manipulate it, if necessary, but have the record ID as a way to restore the relationship of rows to a given Contact, and also, as a handy way to examine the data in the date/time sequence in which it was entered. I have experimented with the following code, to assure myself that I can access the number returned by the NOW() function, manipulate it as a string, and format in various ways if necessary.
Dim n As Double n = Now() sn = Str(n) p = InStr(sn, ".") first = Left(sn, (p - 1)) l = Len(sn) d = l - p S = Mid(sn, (p + 1), d)....................
I am creating an asset management sheet. For the formula I am trying to work out there uses 3 fields : ID, start date, and end date.
What I want to do is be able to show if the ID is duplicated within another record with an overlapping date. So an item is flagged if it is in the list within the same dates as another record. I tried a few countif formulas but with no success.. I may just be approaching the problem incorrectly though.
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
The added piece I now need to put in is how many times a cell value is changed in a day (I will add to a macro to return it to 0 at the end of each day). The way in which I would approach this is by using a combination of a cell_change and count function. Could I ask somebody to advise if this is the best way?
When a cell changes i would like the cell in the next column to record the date of this change. After achieving this i want to set up conditional formatting to compare this date to the current date and if they are the same then change the original cell's colour to show it changed today!
I started using the code below (from ozgrid) which was working fine BUT my cell value in column A is actually taken from a different column. when the different column cell value changes my cell in A changes but the script below does not seem to see this as a change. it only records the date if i physcially change the cell in A rather than another cell prompting it to change.
based on my overall objective and my plans to date please can someone suggest a solution? current code below....
I have an Excel worksheet full of data. I would like to search in a specific column for cell that contain "xyz". If found cell = xyz, then I want to delete the whole record or row.
Is there a formula or option to do this?
I am currently looking at each record and deleting it manually. With a worksheet of more than 2000 records, this become a huge task!
Could it be possible to "sequentially offset" a vlaue, say, of A1 such that, for instance, when A1 changes from "5" to "6" (via formula, not direct input), A1=6 and, say, B1=5, and so on? You know, like keeping a value record of A1, one step back, in B1.
This would be UNBELIEVABLY valuble to me. Thus, would I be in eternal debt to he/she who would resolve this here.
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
The below code works fine except when there is no recorset found then i want to display 0 in the cell but its not doing it. The code just leaves it blank if no recordset found.
What I'm trying to put together is a sheet where i work out how much margin i will be making on a sale (which i done). The bit I'm stuck with is the recording the data on a separate sheet.
What i have done so far. I created a Macro button to insert and copy cells C6, C7 & C8 (the bits i need). Which works but it takes the formular with it so everytime i chage the figure on sheet 1 it changes in sheet 2.
So what i'm asking is there a way to mirror what is display rather that copy?
What i would like to do is record a cell on sheet1 in sheet2 when it reaches a certain number i.e 2. The cell in sheet1 changes all the time but sheet2 must not refresh. Is this possible with a formula?
I have mocked up a typical example between sheet 1 and 2. I have found tools that will identify cell entry changes (i.e. c & d) but not on cell comment changes (i.e. a & b).
This problem seemed to revolve around "digital signing" with further macro changes done from a different machine (without the proper certificate). Excel warns of the problem and then "unsigns" the project.
I've got a problem with spreadsheets that I've been working on. Now, when I tell it to record a macro, I get the macro name, shortcut assignment dialog box and then an error "Unable to record." After "Ok"ing that dialog box, the normal recording macro dialog comes up. Also, lo and behold, there will not be a macro recorded.
I've got no protected cells or sheets and it doesn't matter what security level is set. It is a "signed" macro but I can take off the signature and still have the problem. I checked for "Help - About" for deactivated modules and there was none.
I've got working routines that do some action upon double-clicking within a specific range of cells. I want to be able to "wrap" this routine within a routine that will record the activeCell prior to the double-click and, upon completion of my routine, return to that prior location.
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
