1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
I am having trouble getting some conditional formatting to apply to all cells in a column in a pivot table. Currently, the conditional formatting is only applying to the top level items in the pivot but is not applying to the lower level items. I can see why it is doing this. the range in "Applies to" is only specifying the rows that contain the top level items. I tried to change the range to D10:D647 but, it reverts back to just the top level items. How to get it to apply to everything?
- a list of data - a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code: Sub RSLDASHBOARDV2() 'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D. 'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D. 'Do Not Modify Code Unless Given Proper Privileges to do so. Dim APPSPD As Worksheet With Application .ScreenUpdating = False .Calculation = xlCalculationManual
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code: objField2.PivotItems( _ "TRC").Position = 1 objField.PivotItems( _ "MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code: Sub STATSPIVOT() 'STATS PAGE BASED ON STATS DATA TAB Sheets("STATS DATA").Select Dim objTable As PivotTable, objField As PivotField ActiveWorkbook.Sheets("STATS DATA").Select Range("A1").Select
I have been using the "record macro feature". What I want the macro to do is as follows. 1. cut all data from column C and paste it into G. 2. Use the textTocolumns feature to split a comma delimited string into 2 seperate columns. 3. user the textToColumns feature to remove any leading spaces from column G. 4. cut columns d-H and shift them left startign in column C.
I can do all of this find bu using the GUI while recording the macro but when I check the vb script it's completely missing the paste commands.
When I try and run the macro it, quite rightly, returns "run-time error '1004':No data was selected to parse.
Below is the resulting recorded macro.
How do I amend this macro do include pasting the cut data?
I have a workbook where I need to sort data with range (K2:L24), then move down 208 rows and sort range (K210:L232) and repeat this upto 1000 times. I have shortened a recorded macro as an example and would like to know how to loop or repeat.
Sub Macro2() ' ' Macro2 Macro ' Macro recorded 6/04/2011 by Greg
I've recorded a macro in which I unhide certain columns, copy and paste some information then hide those columns again. The problem is that when the macro is finished, it incorrectly hides columns K to AN. I did not record that and it's not in the code so I'm lost as to why it's happening.
I have a list of items in Sheet1 column A (starting from row 1).
I would like the corresponding column B to have certain values depending on the value in column A (same row), as follows:
If the value in column A has "SYS????CZ", column B should be "HPC" If the value in column A has "SYSNIS", column B should be "NIS" If the value in column A has "SYSJBE", column B should be "JBE" If the value in column A has "ICG????", column B should be "HPC" If the value in column A has "IL????", column B should be "RUP" If the value in column A has "SYSHPC08", column B should be "HPC"
What I tried was to record a macro while typing the formula in B1: ...
Im setting up a spreadsheet that does engineering calculations. Im using macros to run sizes from a standard schedule. It basically takes the values from one sheet (schedule) to another (calculation), then the result from the calculation sheet (Value only, not the link) is pasted back into the schedule. The macro seems very bulky and im sure that it can be made more efficient with a loop. here is a sample of the code from the macro;
I manually create a pivot table (and record my actions) the pivot table references all of the information in my data range (70k+ lines). When I run the recorded macro the new pivot table limits the data range to the first 65536 lines (the old limit)....
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
I have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X) end if"
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
On column A, I simply do an A-Z sort that gives the expected result. So I recorded it as a macro. In column G is a code that corresponds with column A. When the marcro is executed Column A is sorted but the corresponding value in G stays where it is. Clicking the A-Z button works. But when that action is recorded as a macro I get the above quirck. Since VBA is not my beef, I don't really know what wrong.
I have a button with a macro assigned. The macro needs to create a new worksheet at the end of the workbook, rename the new sheet to "New County", make the cell size match the rest of the workbook, and then paste in a template from another sheet called "Master".
I recorded a macro that does this, but it has a static reference to the new sheet instead of what ever the new sheet is. So the Macro works one time, but never again. I'm sure this is an easy fix, and perhaps there is a much easier way to do this, but my limited VBA knowledge is hampering me.
Sub AddNewCounty() ' ' AddNewCounty Macro ' Adds a new County sheet to the workbook. ' '
I am trying to make a dynamic pivot table using VBA. Unfortunately, Im not very good.I have a set of data with variable number of rows and variable number of columns and I need to make a pivot table. Need to select this data from sheet - Master, where the first data entry starts in cell A1. of the data in the sheet, i only need the name and age title In the pivot table fields -
ROWS needs to contain - name COLUMN needs to contain - Age Values need to contain - count of Age
After this is done, since the data will be dynamic, the pivot table will also be dynamic. i need to copy the pivot table data and paste it in another sheet so that I can do some filtering. The filtering part I think i can do my self.