I am trying to create a formula that will look at an entire row of data and if a certain cell in that row meets a particular criteria, it will pull data from another cell in that same column. I am not sure how to get this started.
View 9 RepliesSum A1:A100 only for corresponding B1:B100 containing "paid". translate that to a formula? I don't know conceptually how to approach it.
View 1 Replies View RelatedNeed macro or other code that will examine a column in my my table for particular text (example: find text: "Total") and then DELETE the whole row that the cell containing the text is in.
I have a 3 column table with 20 rows. The first two columns contain travel
expense data. The cells in the third column are blank exept for whichever
cell I enter an "x" in. Please let me what formula or worksheet function do
I use to calculate the travel expenses based on the data in the first two
columns that correspond to the row of the cell with an "x" in the third
column?
Currently have a sheet with column A/B. Column A has any of the following letters to represent Wins, Losses, Ties, Overtime Loss, Shootout Loss - W, L, T, OTL, SOL. Column B has team point totals after each result. So after the win in row one, the team has 2 points. After the losses in rows 2 and 3, the team still has 2 points. After win in row 4 the team has 4 points. After win in row 5 the team has 6 points. After tie in row 6 team has 7 points.
W
2
L
2
L
2
W
4
W
6
T
7
What is the best formula or is there a formula to easily calculate running total based on content from column A this for over 1700 rows?
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
If column B is not empty, I want the corresponding cell in the same row of column A to contain the value "1".
View 9 Replies View RelatedI have some financial data that has been exported via sql from out financial system that lists transactions for each month in a column with 12 columns representing each month of the year in Sheet1. (My financial year runs July - June). The column headings are MONTHLY_TYR_BALANCE_01 thru to MONTHLY_TYR_BALANCE_12 where MONTHLY_TYR_BALANCE_01 = July, MONTHLY_TYR_BALANCE_02 = August etc.
To the right of this data I wanted to have one column that will list the MTD data each month ie in July this should reference to the column headed MONTHLY_TYR_BALANCE_01, and in August this should reference to the column headed MONTHLY_TYR_BALANCE_02
I can get the end user to type the month number into a field and reference back to this but I just can't think how to convert this to a column reference that I can then use.
How do you multiply two column vectors D2:D6 and G2:G6 based on reference cells A3 and B3 that are equal to D1 and G1?
A
B
C
D
E
F
G
1
2
3
4
5
[Code] ......
For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
I am currently using a color count function to both count by color and count by color and cells containing certain characters, such as # or %. This works great.
However, I need to modify the UDF to count all the cells in a range in columns C:Z that contain alpha, AND IF the Interior.ColorIndex of a cell in column B within the same row of the counting formula equals the Interior.ColorIndex of a cell in column B within the same row of the selected cell in the range.
Basically, Column B is a header row, and I want to count the cells in a range in each column C:Z if they contain a name AND their corresponding header cell's color in column B matches the color of the header cell in the row containing the formula.
The yellow highlighted column F (each Reason) in the sheet2 to be placed as main header in the next column and so on as seen in the sheet 3
If they have two similar item number with 2 different reasons - delete the duplicate item number and place the number in each column according to its reason as seen on row 16 on the sheet3
If they have two number with similar reason - just sum up the number
sample excel 2.xlsx
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I have a named range (D:16 F:800) called “NameRange” which contains names.
I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom
Tom Sue
Mary Bill Ted
Tom Sue Bob
Fred Bill Sue
Bob Tom Kim
and offset “x” to look like this:.......
I have created formulas in cells BB2 through BM2 (1-12). I would like to copy the formula to B3 based on the content of A1 (A1 can only be a number from 1-12, representing months).
Example, if A1=3, return the formula in BE2
Formula in BE2 =
=INDEX('1'!$B$2:$AR$2999,MATCH(INDIRECT("$A"&ROW()),'1'!$A$2:$A$2999,0),MATCH(INDIRECT(CHAR(COLUMN()+64)&"1"),'1'!$B$1:$AZ$1,0))
I'm trying to obtain a result based on the number of characters in a cell. If the cell content is blank or contains 9 digits then leave blank.
Any other result must provide the outcome of "incorrect number supplied".
I've tried the following formula but it doesn't work.
I would like to paste a formula down a column but it should only paste if there is text in the cell to the right of the column where I am pasting (i.e dragging the formula down).
View 1 Replies View RelatedI am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
[Code] .....
Can a macro be used to:
1. Delete rows that contain certain text in a worksheet ?
2. Highlight a cell a colur based on a response ?
I have attached an example of what i mean .....
In the Audit Protocol worksheet is the main information - which contains questions and answers .... If a yes, n/a or no is selected then a response is automatically generated in the observations column (thanks to SHG for helping me with the formula for this) ..... How do I then get the cell to change to red if a NO response only is selected ?
Then the information from the Audit Protocol worksheet (the observation column and number column) are copied across to the worksheet named Action List (this is done just by the copy function) .... How do I go about deleting rows that contain "no action required" - as these are not needed for the report to be generated ?
I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
I have this:
Sub CompileData()
'Dim rng1 As Range
'Dim rng2 As Range
'Set rng1 = Worksheets("Sheet2").Range("A4").End(xlDown)
'Set rng2 = Worksheets("Sheet2").Range("C4").End(xlDown)
'Set AllRng = Union(Range("rng1"), Range("rng2"))
'Worksheets("Sheet1").Range("A5").End(xlDown).Delete
Now when its pasted it has cells with "Nil" in it. I need to delete them, or just not copy them over.
I have a drop down list made from the Forms toolbar with a list of items: 1, 2, 3, 4, 5. I have set it with a linked cell, so when you choose, say 3, from the dropdown, 3 appears in B10.
I was hoping to add a 'Go' button, which would run another macro depending on what is in B10, i.e. so if 3 was chosen, then you press 'Go', Macro3 would be run.
So I have 5 macros called Macro1 - Macro5, and I need some code for the 'Go' button which will run the right macro depending on what number is in cell B10.
I have a list of Marketing Product descriptions that I have to match to a list of system codes and was wondering if I can do this in excel.
Marketing Bumph (first Tab):
A B
1 Marketing Code Friendly description
2 XYZ1111 Offer 1
3 ABC111 Offer 2
System Info (real codes not marketing)
A B
1 Marketing Code Real Value
2 XYZ1111 GL321
3 ABC111 FF453
So what I want to end up with is:
A B C
1 Marketing Code Friendly description Real Value
2 XYZ1111 Offer 1 GL321
3 ABC111 Offer 2 FF453
I have 5000 urls in one column and I want to take some part of the content from the urls and wanted put in next column in their respective cell.
how I wanted the data in the next column.
I need to do the following:
I have a list of cities on one sheet. The headers are the counties and below each (6 columns) are all the cities names.
I need to be able to show all the cities of a specific column on a nother sheet (autofilling column down with all cities names) when i type the name of the related county in an adjacent cell.
I have standardized each existing worksheets and any new worksheet to have certain parameters. The purpose of the Macro requested is ensure these worksheets are sorted alphabetically (and only these worksheets). The code I have been working with is contained below. It is working as expected but now I need to incorporate a statement which places the following condition:
Sort worksheets only if A3 has cell value of eCRF NameIgnore worksheet name: TOC & ENTER ECRF NAME
VB:
Sub Sort_Tabs()
'declare our variables
Dim i, j As Integer
[Code].....
I want to format a range of cells based on the name listed in a cell in column A (starting @A6). I currently do this manually. It is to help me visually see the line I am working with and for what person.
I am almost certain that is going to take a VBA, but I know little to nothing about setting one up.
I have attached a sample. I am using Excel 2003.
I have a column with various values in, string and numeric. The strings I want to keep have "," in and letters one side and "space" on the other. All the cells I want cleared do not have ","
The rest of what I'm using works fine accept this line which forces an error.
[Code]....
I just ordered vba for dummies, in the meantime I will have to get my info from the experts on this board. I want to use a name I have in a cell in a msgbox routine.
Currently I have