Sub test
Sheets("Sheet1").Image1.Picture = LoadPicture("")
Sheets("Sheet1").Image1.Picture = LoadPicture(CFPicPath + CFPic)
Range("A1:G37").CopyPicture Appearance:=xlScreen, Format:=xlPicture
Sheets("Sheet2").Select
Range("A1").Select
ActiveSheet.Paste
end sub
I have a workbook that has many Pictures created with the Camera command. I have found that VBA macros in any workbook open at the same time as the one with Pictures run very slowly. Is there a way of temporarily turning off the Picture Refresh within the VBA in the same way as you can turn off automatic formula updating.
I'm working on a dashboard that shows some market developments. One of the problems is that I'm using linked pictures and a combo box to choose the appropriate graph, but sometimes the picture link returns a blank. Apparently this is a bug that can be fixed by running a macro that refreshes the picture link. Unfortunately I'm a real beginner with this kind of stuff.
Trying to paste image/picture jpg into cell. Don't know enough basic to use earlier found code. Can't just image upload because image floats- not working in cell.
I have a created a worksheet button using an image holder (because I couldn't get the image to display properly on a normal command button) and when I click on the button, it distorts the picture because of its default zoom feature. I tried resetting the picture to its original size using the .height and .width properties but this produced an error saying the object doesn't support this property (weird because they were available through the suggestions menu that's available when you're coding). If I could just reload the original image, that would do the trick but I am not sure how to do that without using an file path that would only work on my PC and not on other users'.
I want to add an image to a sheet. The image is to print but I want the data from that sheet to go over the top. I can't seem to get the image behind my data.
I know how to load a picture onto an image control using VBA code, but how do I clear the picture? (NOTE: I am not talking about using the properties window in the VBE, I am talking about coding in VB)
I have a picture on my image at userform. And I want to change my picture size ( like attached picture: fast image resizer program ) and save as different location. It is my school project.
Your valuable macro codes about ıf this and attached workbooks are very important for me.
I have an Invoice setup for a Car Servicing Garage in excel. It does a few things:
1) On saving the workbook it will take a jpeg screenshot of the worksheet and save it locally
2) The name of the created jpeg file is taken from cell B9
Cell B9 contains the vehicle registration number. So, obviously my problem is that if a the same car comes in on more than one occasion (which happens frequently), the original jpeg will be replaced as the file name is not appended. This will mess up the invoice records. So what I would like is for it to acknowledge that a jpeg file with that name already exists and to just append a "_1", "_2", "_3" etc on the end of the original jpeg file name for the new jpeg file name. I have attached the my excel file so ideally, if someone could insert the necessary code or PM me that would be great.
I want to delete a picture from an image control in a worksheet when pressing a button. So my code is:
Private Sub CommandButton1_Click() Sheets("Sheet1").Image1.Picture = LoadPicture("") End Sub
Well, the problem is that this code only works when I create it. If I save and close the excel file when I open it again and I press the CommandButton1 I get the following error: Run-time error '-2147417848(80010108)' Method "Picture of object "IImage" failed.
How can i paste a picture from a workbook to my userform image control? Without having to create loads of code for this to be done? Ive tried something like this
[Code] .....
And cant get anywhere near doing what i want it to do.
I have an image box on a userform in Excel VB. Is there ANY WAY to load an image into this image box from an object that I have loaded into an excel worksheet something like
If userform1.checkbox1=True Then userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 1")) ElseIf userform1.checkbox2=True Then userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 2")) Else msgbox "No image" Endif
I'm trying to make this macro work to resize images for our fashion Look Book. In theory, it should work. But of course it does not Here is the code we are using:
Code:
Sub BIGcrop() Selection.Height = 507.6 x = Selection.ShapeRange.Width y = x / 2 Z = y - 144
[Code]....
I want all my pictures to have a height of 7.05 inches and a width of 4. The height comes out different everytime depending on the scaling of the template I'm using. I need it to adjust accordingly. I'm open to having the image move into merged cells, as long as it will first adjust the height and then crop the sides (so the orientation stays the same).
I have a query with ODBC connection to a SQL database. This query's parameter is linked to a cell. The resultant data is the source for a pivot table. I want to refresh the pivot table, when the query is run. I've tried using the cell that triggers the query....but the problem is that the query takes about 10 seconds to run. By the time the query returns new data....the pivot has already refreshed. I need it to refresh AFTER the query is complete.
I tried adding a cell that sums up the data from the query...thinking when THAT changes (due to updated data), to trigger the pivot refresh. Problem is that I don't know the trigger for when the sum cell changes (ie....formula change, not typed in.)
My request is similar to the points discussed in the above mentioned thread, but, it is a little bit different ..
Instead of inserting the picture to the worksheet, I want the picture to be copied from one folder on the HD to another folder called (Employees photos), which is located in workbook's path.
In other words, I need a code to copy one jpg picture from one location to another.
I would like a macro that would analyze a range (H15:GI15) to see if they contain FH, FS, FB, FR, or FC and if they do, copy the related picture associated with the 5 variables and paste it in the cell.
I did this code and it worked, but the code is very long. Another problem I have is there needs to be a way to delete the existing pictures before the code runs too. Because the cells may change and the button that runs the macro would be labeled "update" or something to that effect. I don't really need it to run everytime the cell is updated, just when the "update" button is pushed.
I need to link an image to a cell value and display the selected image in a new sheet of the same excel. I am attaching samplefile for easy reference. The requirement is, from the workout sheet when I select from drop down list, then the corresponding cell value appears in Parameter sheet in C9 cell.
There are four images copied in Parameter excel. The given image has to be selected and linked to the C9 cell value. Based on the selection that particular image should be shown on Sample Picture sheet. Here based on the selection only the image should reflect here.
I need to find an easy way to locate an image on my server and upon selection rather than inserting the actual image I need to insert the image path. e.g. "s:imageshighresgreen1234.jpg"
I'm trying to copy a picture from one Worksheet to another and then resize it, when i select the picture after pasting it into the other worksheet i use the code ActiveSheet.Shapes("Picture 6").Select, the problem here is that i don't know the name of the picture because i use a loop that copys alot of pictures.
I am trying to make an Excel sheet with a frontpage sheet and a data sheet. In the data sheet I have several columns with data and then in the end a cloumn with pictures. On the front page sheet I can easily with VLOOKUP formulas transfer the desired data from the data sheet to the front page sheet but I cannot seem to figure out how to copy the picture. When I try to copy the cell with the picture in it, the formula only copies the cell value, which is "0" because the only thing which is in the cell is the picture. how to copy a given picture from one sheet to another based on the information in another cell like a "Vlookup" formula?
i have an excel spreadsheet with 27 or so workeets. it contains sales figures in it. I want to be able to link mutiple cells of this workbook to another workbook so that it retreives that data, So that when I hit the refresh (!) button it will automatically put the data in. I will recieve new sales figures (new files) on a monthly basis so i want it to be able to update the figures to the new figures.
I have a conversion chart of decimals to fractions I made in Excel. I want to copy and paste as an image so I can shrink it to fit at the top with the frozen headings.
I tried to take a picture of it on the monitor, but the photo captures the screen fuzzy pixels.
I tried to copy and paste but could not find where I could paste as a special attribute. Or a picture on the internet with the decimal first and the fraction second in 1/16ths
My workbook simply has multiple columns of data which will be summarized visually in a tag cloud (I have the tag cloud part taken care of already creating either a jpg or png, I simply have to change the extension within a batch file to change between picture formats)
I need to have the tag cloud image display and update depending on which column the user would like to summarize (for now I have simplified the issue by only having one of the data columns in my workbook, and will worry about the user selection of the data column to be summarized later).
My Main Question:
Focusing on the image display and updating now, whether it be an ActiveX Image Control or any other way. I've been playing around manually before I try and code it and I can not get either a jpg or png file to attach to the ActiveX control (both of which cause an Invalid Picture Message).
The file name can stay the same if need be and for now I think/assume that'd be easiest (I have my Tag cloud generator just replacing the previously existing image file of the same name).
Would ActiveX control be the way to go for this dynamically changing image?
