I'm trying to split the contents of a cell to a new row (with data from other columns on the row copying across) below the originating cells row. Most of the split cell macro posts I've seen split the contents to a new row at the bottom of a range, however I'm looking to split the contents to a new row directly beneath the original row where data will already exist. I don't want to copy over this data I just want to push the data down depending on the number of rows created.
The contents in the cell being split can vary (1:n), so the number of rows needed to be inserted depends on the count. The majority of the contents in the cell is separated by a line feed (Alt Enter) but some may be separated by a tab or comma.
Essentially what I'm trying to achieve is something from this
A
B
C
D
If Cell A1 Contained 1,154,546,487,47,36,48,47,668 and so on. Using a Formula or Macro how can I get it to take each number(s) before each comma and put it in the next column on the same row?
So using the above example numbers you would end up with 1 in column A1 and 154 in column B2 and so on and so forth.
i'm trying to do is split the contents of the cells in column A in to 2 seperate cells. The contents of the cells in column A are like this: alpha.bravo.charlie. I want to delete alpha and have bravo as the new contents of column A and charlie as the contents of column C.
The columns A & B need to be split as shown in the table (3 columns as shown in D,E & F) In column A the hrs needs removing, but there is also some spaces at the front of this text which needs removing. Column B needs splitting as shown in the table.
******** ******************** ************************************************************************>Microsoft Excel - MAPPED SCHEDULE.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1 4.3 hrs1-08-739677-00 U1 DC STATOR COOLANT PMP 4.301-08-739677-00U1 DC STATOR COOLANT PMP2 1.1 hrs1-08-739543-00 SW/BD ALARMS FAILED 1.101-08-739543-00SW/BD ALARMS FAILED3 1.1 hrs1-08-739544-00 ALARMS FAILED ON TEST 1.101-08-739544-00ALARMS FAILED ON TESTSheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
In an adjacent column, I am seeking to display the letters, numbers or symbols that appear before '/'. I would normally solve this little problem with something like =left(A5,2) or some combination of left and len. This method fails when the formula finds a len of 8 when the previous highest len was 7.
I have a spreadsheet in excel 2003 that has alot of model numbers listed in a single column with a dash. Is their any way I can remove the dash and seperate the numbers into 2 columns?
Current Spreadsheet Model Number 199-001 200-003 210-081
This is what I'm trying to accomplish Column B Column C 199 001 200 003 210 081
I have a column with adresses. Cell A1 contents Road 12 Cell A2 contents Street 555 Now i want to split the content. In cell A1 Road and in cell B1 12 In cell A2 Street and in cell B2 555. Is there a macro that can do that?
I was just not able to figure out how to write a macro for splitting the cell data into multiple rows with the other column values being duplicated. Just elaborating my problem, its like i have a column in which i have multiple values separted by a comma, So i need to divide all these values on basis of a comma and then copy this value to a new row below, along with the previous column values same for this new row. in my file cost center column is to be worked upon. Can this be done by a macro ?
I have a situation where I have source data formatted like this:
Document ID Document Name Author
[Code]....
What I would like to do is to get each author on a separate row. I am able to do that using Text to Columns using the carriage return and then doing a transpose. I've also seen some threads where VBA is used to accomplish similar. However where I am stuck at is getting everything else to drop down accordingly. I.e. with the data set above I'd like to get to:
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc. A2: A. Bellotti A3: A. DEPPELER S.A.
Every week I get a report that contains 1 or more (sub) part numbers in each row down column E, separated by a space. I need each part on a separate line, with the rest of the data on that row intact. Because these are the sub-components of an overall part, the data in column E is stored grouped together like that.
I currently use text to columns to break those up, separating them by the space, add a count of those cells so I know how many sub part numbers there are, run a 'duplicate rows' macro on that count, then manually delete out numbers so I'm left with one part number per row. The report is already over 100 rows long, so after I run the 'duplicate rows' macro I have a lot of rows to work through.
I have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.
I have merged two workbooks into one. What I need to do at this point is to delete all rows that have a duplicate entry, basically anytime the cell content in one cell matches the cell content in the cell right below or above it, BOTH rows should be deleted. At this point, this is above my VBA skills so I'm asking for help in how to do this. The stripped version of the workbook is attached (only 100 rows) but in reality this is a huge workbook with almost 22,000 rows.
You will notice in the attached workbook, that cell contents for A2 and A3 match. For what I need to do, I need both rows (2 and 3) to be deleted. If you go down a bit, starting in row 89 all the contents in column A are unique so those need to remain.
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting.
However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations: (1)to compare the cell with the cell below I have used
If cell = cell.Offset(1, 0) Then
(2)to act on the rows for the two connected rows
Sub Test4()
' Loop through rows
Dim TheExtract As String Dim cell As Range
'Application. ScreenUpdating = False For Each cell In Worksheets("Sheet 1"). _ Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp)) TheExtract = cell If cell = cell.Offset(1, 0) Then cell.Rows("1:2").EntireRow.Select Selection.Cut Sheets("Test").Select ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select Selection.Insert Shift:=xlDown End If Next cell 'Application.ScreenUpdating = True
I'm am trying to set up a household finances dashboard in excel - What i'd like to do is categorise & tag HH expenditure based on part of the description within a bank statement, the desired result being:
account tagging.jpg
My ideal solution would be some kind of lookup with a table containing the keywords & corresponding tags to match part of the description to, as this will allow easy management of the tags, situations where I have multiple keywords for the same tage (supermakets for example), and so forth. Is this possible?
Currently I am using a very large nested forumula which i've cobbled together based on searching for ideas. It works, but managing new tags is difficult, part of the formula i'm using is:
I have a large set of data regarding the activities going on in particular rooms. The data contains activity name, start time, day, duration, room and size.
I would like to select all rows that contain a cell in the activity name column which contain the words 'VideoConference'.
I have tried to Search, Select All then index the remaining data using =iferror(index(etc. However some activities occur in more than one room and all variables apart from 'Room' are the same. Thus when I have tried to index the room column I get the same room for both rows.
ps the raw data set consists of +28000 rows so I can not simply look through and copy.
I'm sure there is an easier way than copying and pasting each individual cell from one spreadsheet to another. Is there a way I can define a batch of cells (city, state, phone #) and copy them into the other spreadsheet so I don't have to do each cell individually?
Here is a picture to show what exactly I am trying to do.
SS.PNG
Also, the cells that belong in the same column and row on one spreadsheet are equal distance from each other throughout the other spreadsheet that has all the info in 1 column.
I have a spreadsheet that has a subtotal row after each data grouping. I need help with a macro that will go to column C, look for any cells with the word "Subtotals" in it, and format that row based on another macro I already have set up. I've tried about 50 different types of macros that I found out on the web, but none have worked.
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
