I have a report that is auto generated in Excel format but I need to summarize the hours worked. The output in each cell in column "I" can be any of the following combinations.
IE: 1h, 15m or 1h 30m
I have tried the following formula with some success.
I need to remove only numbers from excel cell - I have tried using the "constant" function but did not work. I have thousands of cells with a consistent 4 digit number like this:
1000 the rest is text
How can I remove only numbers but leave all text in the cell and then if I can trim the cell so there are not any spaces at the beginning afte removing the numbers.
I have copied information from an outside source to Excel. Unfortunately, the information includes numbers preceding the text which I need to delete for all records. Is there an easier way of deleting this information without going to each individual cell to delete the numbers
I searched through some pages of old threads but could not find specifically one solution for performing the subject task on text strings in cells.
I have a lot of Excel files which contain both numerical data and text strings where each cell has been forced to have a leading apostrophe appended to the left side of the text strings and numbers.
How can I strip the leading apostrophe out?
I know the apostrophe is a hidden character, so I can't use Find & Replace.
I would like to figure out some VBA so that I could build this into and automate this via a macro I'm working on.
Is there a way to comprehensively do this for all cells containing text and numbers in a worksheet?
I need to clean out unnecessary data from a file, (see attached text file), I'm not sure how to go about this in excel. basically every file starts with 9 cells that needs to be deleted, two cells of real data then one with garbage that needs to be deleted, it goes like that for 40 cells, then again 10 cells of garbage that needs to be deleted, then 40 of real data and goes like that up to 3000 lines, I know it sounds confusing but if you take a look at attached file, at the end I need to have all cells full of data
I have a lot of Excel files which contain both numerical data and text strings where each cell has been forced to have a leading apostrophe appended to the left side of the text strings and numbers.
How can I strip the leading apostrophe out?
I know the apostrophe is a hidden character, so I can't use Find & Replace.
I would like to figure out some VBA so that I could build this into and automate this via a macro I'm working on.
Is there a way to comprehensively do this for all cells containing text and numbers in a worksheet?
I want to change the character ~ with . in order to be able to make them numeric values to be feeded to other functions. But REPLACE seems not doing the job so I've been checking out other options such as seperating after and before the character ~. Details are below. I've been trying to use this formula to extract values from a delimited database which I open with excel. The formula that has brought me close is =IF(ISNUMBER(E51)=FALSE,LEFT(E51,LEN(E51)- FIND("~",E51)),E51)
14010~000 3210~0000
When I import the database, the figures above have originals as 14010.00000 & 3210.00000 but transfer to excel as above. As far as I have observed 9 character spaces are displayed & the DOT transfers to ~ for some reason. I need the LEFT section of the ~
1) Text value here 1. Text value here 1.Text value here 1 Text value here 1)Text value here
Is there a way to take the cell contents from the first Alpha character? (i.e. no punctuation, no numbers). There are other numeric characters in the text values that I would like to keep.
I'm trying to clean up a very large list of last names. Only one individual cell, but that cell includes numbers, decimal points, and spaces inbetween the numbers. All I want left in the cell is the last name. I have just under 100,000 to do! How would I go about this? Using Excel 2007.....
I want to remove the penta numbers from a 10 digit number. Doesnt matter wherever it comes. For eg: If the number is XXX0011111 in this I want to remove 11111 from this. If the number is XXX0000011 I want to remove 00000. Can anybody help with a macro or something?
I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B Company 2Country C Company 3Country C Company 3Country C Company 5Country A Company 5Country C Company 5Country C
For example: - For Company 2, a cell containing "Country B, Country C" - For Company 3, a cell containing "Country C" - For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
I have found a very useful UDF for removing non-alpha characters from strings. (See below, Credit for posting to Stanley D Grom - Ozgrid post ´Removing Non-alpha Characters From Text´).
Option Explicit
Private Function RemoveCharacters(InString As String) As String Dim intLoopCounter As Integer Dim intStringLength As Integer Dim intASCIIVal As Integer intStringLength = Len(InString) InString = LCase(InString) For intLoopCounter = 1 To intStringLength intASCIIVal = Asc(Mid(InString, intLoopCounter, 1)) If intASCIIVal >= 97 And intASCIIVal <= 122 Then RemoveCharacters = RemoveCharacters + Mid(InString, intLoopCounter, 1) End If Next intLoopCounter End Function
Two requests:
1. Could the UDF be modified such that any part of a string contained within brackets is also removed (e.g. "NLGA High Street (West-Enfield), EN6" becomes "nlgahighstreeten")?
2. Can an argument be added to the format of the UDF, such that numbers (0 to 9) are either included or excluded (e.g. RemoveCharacters(A1,1) where the argument ´1´ would include any numbers (0 to 9), so "NLGA2003 High Street (West-Enfield), EN6" becomes "nlga2003highstreeten6")? ´blank´or ´0´would exclude these numbers, i.e. would return "nlgahighstreeten"
I need to format C2 so that it removes all text that comes after a dash in B2, but if no dash exists, then it returns the text: Parent. For example, here are 3 values in B2, B3, and B4:
1234-s 1234-m 1234
In C2, C3, and C4 I'd like to have the following values returned based on the above values in B:
I am copying text (contest results from another website) and posting into excel. As it is formatted on the original site, it posts the place, followed by a period, then the team name, then a dash, then the score.
Example ... 4. Smokers Purgatory - 662.2858
To place it in our database we need the period removed from the place, and the dash and score removed.
Example ... 4 Smokers Purgatory
Is this possible to automate in excel or is there a way to format so that excel seperates the place, team name and score? Or should I be looking for a different method?
Is there a function that can remove all text and other characters from cell and only keep the numbers? The numbers can be randomly in the cell so not only in the end or beginning.
I have a name field that contains last name comma first name space parenthesis text parenthesis space parenthesis text (may have a space or hyphen within then a final parenthesis).
Examples:
Smith, John (MD) (Family Practice) Brown, Alice (DO) (Oncology) White, Joseph (MD) (OB/GYN)
I need to remove everything after the degree so that it looks like this:
Smith, John (MD) Brown, Alice (DO) White, Joseph (MD)
way to use a function to remove text from a cell. I cannot use VB code, due to the spreadsheet being integrated in an operational software application - already tried it and get nothing but errors from the application. Was also trying to use a Find and replace function, but it's not working.
Here's the scenario - I have a cell that returns the weight of a product from the system, but it includes "LB" or "KG" in the cell along with the weight. I do not know how many characters will be returned to the cell, as it depends on the product. It could be a single digit up to 10 digits, including a decimal point. I need to clean up the cell to only a number, because in the next function, I am trying to round up the number that is left in that cell (won't round up with KG or LB in the way).
I want to remove a string of text from the front and rear of a cell value and would like to do it with one formula. I have tried using LEFT,RIGHT and LEN. I would Like to use the SUBSTITUTE formula as the user can define the actual string to be removed.
I can achieve want i want using two columns i would just like to be able to consolidate down to one.I have tried nesting the formulas but i always seem to get an error.
Characters to remove Raw data Output
Front dog dogcatmouse cat
Rear mouse dogratmouse rat
Assume that the table uses stadard naming conventions for Columns(a,b,c...) and Rows(1,2,3...)
I am looking for a formula to grab only the numbers withing a cell that has text in it i.e (John Peters142 lp) or (Sally Jones54) or (Terry Cram310 jkb) sometimes there will be text after the number and sometimes not, the format is as shown with no space between name and number but a space after the number.
I need the " solutions cells " to match to the " source cells " and return a " yes " or " no ". in cells d4:d10. Ex: #1 cell C4=01234598, it will conduct a search & match of cell A5 which contains the number 123, since cell C4 contains all 3 numbers from cell A5, then the formula would result in a " Yes ". The match has to contain all 3 numbers from the solution cells to the source cells.
Ex: #2 cell C7=67891234, it will conduct a search & match of cell A8 =901. Since cell C7 only contains the 9&1 from cell A8, it would return a " No " because cell C7 did not contain all 3 numbers from cell A8. I'm not sure if the IF, Match, Index or Count formula is the right one to use, they all seem to partially work, but still don't complete this problem.