Removing Data From 2 Different Worksheets With Same Macro?
Feb 17, 2014
I have this Macro that removes the selected items from the listbox1 and sheet called "Form" the only problem with that is that I have another sheet with a formulas in it that referes to the cells/ranges in sheet "Form" and so when I remove the range in "Form" worksheet the range still exists in my other worksheet where the formulas are and this is causing the errors.
What modifications I need to make to my macro to be able to delete data/ranges from sheet "Form" and sheet "Training Cost" ? so if I delete range A5:D5 in sheet Form it will also delete range A5:D5 in Training Cost.
[Code] ......
View 2 Replies
ADVERTISEMENT
Apr 25, 2007
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE()
Dim myRange As Range
Dim myRow As Range
Sheets("CAMPAIGNS_2007").Select
Set myRange = Range("2:30")
If myRange Is Nothing Then Exit Sub
Application. ScreenUpdating = False
myRange.Replace What:=Chr(160), Replacement:=Chr(32), _
LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False
For Each myRow In myRange.Columns
If Application. CountA(myRow) > 0 Then
myRow.TextToColumns Destination:=myRow(1), _
DataType:=xlFixedWidth, FieldInfo:=Array(0, 1)
End If
Next myRow
Application.ScreenUpdating = True
End Sub
View 8 Replies
View Related
Jan 30, 2014
I am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
View 3 Replies
View Related
Jul 6, 2009
I need a macro to copy data to various worksheets, in sheet workings, header is row 5, i have list of a/c codes in Col A, i need the macro to do autofilter col a5, and do a custom filter that begins with the following criterias, i then need the macro to copy filtered data to various worksheets, each worksheet is in the order of criteria, so CITI will be copied to CITIBANK_INTERNATIONAL etc. Target range to copy data to various sheets is A7
Criteria
Array("CITI", "CHES", "EXIG.AMPS20", "EXIG.COGN20", "BNPP", "ATOH", "ABNA", "BBHA", "BBHT", _
"BONY", "CITA", "JPMT", "NTCT", "STATE")
Worksheets
Array("CITIBANK_INTERNATIONAL", "CHESS_ASSET_REC", "LIFE_EXIGO", "NOMINEE_EXIGO", "INTL", "MC_AIMS_to_HIPORT", _
"SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "NORTHERN_TRUST", "NOMURA")
View 9 Replies
View Related
Aug 20, 2009
I am trying to take a workbook with 10 worksheets and have the contents copied and pasted into a new worksheet without any extra blank rows onto a new spreadsheet. Does anyone know how to achieve this? The purpose is to copy the information off each of the 10 worksheets and be able to use the consolidated information for pivot tables.
Important Facts:
- Each worksheet starts with data in cell A7 and ends at BL7
- The number of rows on each worksheet is inconsistent (e.g. one sheet ends at row 12 another at row 101)
- The columns have uniform titles and data below
View 9 Replies
View Related
Jul 7, 2014
for creating the macro As I dont have any idea about macro.
My question is that I just want to marge all the tab into one tab however some header in all the tab are dirffernet however I need one header.
I have attached the example file, in that tab named as "OUTPUT" that is what I needed by macro.
View 14 Replies
View Related
Feb 6, 2009
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
View 5 Replies
View Related
Oct 30, 2010
I have a macro below which splits the data in my workbook (Attached) into seperate workbooks on the basis of each change in data, and saves the new workbooks with the value available in column A. Everything else works perfectly with this code I just want the code to take the workbook name from Column B, not Column A as it is currently taking.
Sub Test()
Dim Sh As Worksheet
Dim Rng As Range
Dim c As Range
Dim List As New Collection
Dim Item As Variant
[Code] ......
View 9 Replies
View Related
Apr 16, 2014
how to copy data from two different tabs and then paste it into one? My below code opens up a workbook and extracts the appropriate data, but I also need it to extract data from another tab within the workbook that was opened.
Sub LTDexportDATA()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
[Code].....
View 1 Replies
View Related
Jul 10, 2014
I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.
Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).
Column A Column B
PIN
CID
SIP
View 9 Replies
View Related
Mar 15, 2003
I have a spreadsheet containing a factory's operational data, with each machine in the factory being represented by its own worksheet.
The sheets all have the same structure, with each line of data representing a shift (we have 12-hour continental shifts, so column A of all the pages has the date in an standard format, and column B has either "d" or "n", representing the shift). Various datat is documented on each machine on a shift-per-shift basis.
What I need to do is figure out how to do a macro that extracts all of the lines on all of the machines' worksheets that pertain to a particular shift (for instance, all of the lines where column A read "14-Mar" and column B read "d"), and export the values of the entire row to another worksheet, creating a shift summary on one page.
To do this, I would like to make the date and shift user-definable variables that appear at the top of what would become the summary sheet, and have a button that activated such a macro at the top of the page as well.
View 9 Replies
View Related
Aug 11, 2009
I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.
At this point it would be helpful for you to open up the attached file so that you can understand my explanation.
Basically what I want the macro to do is:
1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).
2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.)
++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.
I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).
View 12 Replies
View Related
Jun 25, 2014
I have a requirement where I need to summarize multiple work sheets. And each work sheet as different range. Column names are same in each sheet but number of rows in each are different. Like consider there are 3 sheets with employee details. Each sheet has Employee Name, Employee Number, Employee Location. But in first sheet as 10 employees and second sheet has 20 employees and third as 25. So the requirement is I need to summarize all employees.
View 1 Replies
View Related
Jan 30, 2009
the following code filters data and copies to worksheets specified in code, can this code be shortened to make the macro run faster. Also in my second criteria how can I put "Contains "PT2" in the criteria as nothing happens when i run the macro, is *PT2?
With shtRec
.AutoFilterMode = False
.Range("A7").AutoFilter Field:=8, Criteria1:="LEHMAN", Operator:=xlAnd
With .AutoFilter.Range
On Error Resume Next
Set rng = .Resize(.Rows.Count - 1).Offset(1).SpecialCells(12)
On Error GoTo 0
End With
If rng Is Nothing Then
MsgBox "No data to copy"
Else
rng.Copy shtLehman.Range("A6")
End If
.AutoFilterMode = False
End With
View 9 Replies
View Related
Feb 17, 2014
I have a worksheet that has macro events attached to command buttons. When a ‘Start’ command button is clicked, a timer begins counting in seconds and displays the value in cell B3 until a ‘Stop’ command button is clicked. The event works flawlessly as long as I don’t open up another workbook (to continue working in Excel).
When the second workbook is open…then time stops working in the workbook where the macro was created…and starts displaying the ‘timer count in seconds’ in the new active workbook--which overwrites/destroys the data in the newly opened workbook. When I go back to the original book that called the macro…it continues counting again.
I need this timer to continue running in the workbook with the command buttons (in the background) while I work on other worksheets in other books. Is there a way to keep the timer running no matter how many other workbooks are opened and prevent it from overwriting whatever sheet is active? This code in the Increment Sub below ‘overwrites’ the contents of cell B3 on whatever sheet is active---and stops the timer in the on the sheet with the ‘Start’ command button.
View 1 Replies
View Related
Aug 15, 2012
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies
View Related
May 1, 2013
I have one worksheet with four columns of data. Column A is a well name, RA-0001, column B is the measured depth of the well from 0 feet to however far down it goes, anywhere from 4000 to 15000 feet, column C is the inclination of the well, column D is the Azimuth.
I have 500 wells from RA-0001 to RA_0500 or so all in this one worksheet, all the wells have varying Measured Depths associated to their well name. I need to create a macro that can separate the wells and either put them in a new worksheet for each well, ie. a worksheet named RA-0001, RA-0002, ..... ect. OR, and this would be nicer, a macro that can actually save all these individual wells as (Formatted Text (Space Delimited)) files with the associated well name.
Here is an example of what it looks like. The columns do not have a subject line to state what information is in each column because I dont need it in that format.
RA-0001
0
0.00
0.00
RA-0001
100
0.91
5.56
[Code] .......
Even just knowing how to create a simple macro that would take all the data from each well so I could manually copy and save them as new files.
View 7 Replies
View Related
May 5, 2014
I'm trying to update a the summary sheet that will run through the 10 worksheets and bring back the entire row (or the columns I specify) that matches the creteria MS.
MS will appear against each row in the same column in all the tabs.
So in the summary sheet I would see all the rows individually that appear in tabs 1-10.
Excel 2007.
View 9 Replies
View Related
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Feb 10, 2012
However, with this macro I am wanting to remove the Input Box that pops up and requires the user to hit 'enter' everytime the macro runs. Instead, I would like the macro to automatically insert the rows based upon the value of cell A1 without having to confirm with the Input Box.
Code:
Sub InsertRowsAndFillFormulas_caller()
Call InsertRowsAndFillFormulas
End Sub
[Code]....
Because I am such a novice with coding, if the response could be in a form where the entire macro code is spelled out on what needs to be changed. That way I can just copy and paste the macro response instead of having to try and figure out how to apply your suggestions to my existing code.
View 9 Replies
View Related
Apr 11, 2012
Been struggling with the + sign. I have been using code such as shown below, but it just wont work for +.
Selection.Replace What:="~~", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Selection.Replace What:="^", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Selection.Replace What:="~*", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
View 9 Replies
View Related
Oct 10, 2009
I want to create a macro that will cut and paste a worksheet out of an existing workbook and tidy up the table by removing all rows where there is no value in one of the fields (product or part number for example).
View 8 Replies
View Related
Feb 20, 2012
I incorporated more codes to the ones that were just solved from this board, but how can I make the active cell stay on A1 of sheet "hypo_tax_dropdown"? Also, I obtained the codes for removing the duplicates from macro recording, will these codes work on any machine? I noticed that it doesn't have worksheet.function
Sub Macro1()
Dim X As Long
Sheets("Hypo_tax").Select
[Code].....
View 7 Replies
View Related
Nov 1, 2011
I have a combination chart with data from Sun thru Sat (7 days). My manager wants to display only the weekday data (M,T,W,Th,F) and remove the weekend data (Sat,Sun). However, I also need this data to be included in other charts I need. I was thinking in years past, that I was able to remove specific data from the chart directly without having to alter or change the spreadsheet data? I have copied a second set of data and hid the weekend data, however, I have gaps in the data, which I need to remove in the chart display. Not sure what to do, or the best avenue?
View 2 Replies
View Related
Feb 4, 2014
where i copy up to 1000 products ID's like this: "1234567890 AA11111"(ofcourse there is allways differend code for every product its just a example :)) and paste it to exel, and the problem is i need only the 10-digit number (it's allways 10-digit number but the second one is sometimes diffrent) so it is possible to make makro that will remove every character after 10th character ?
View 6 Replies
View Related
Feb 22, 2012
(Split cell into multiple rows) I need a macro to remove contents within brackets in a cell.
Example:
A1 contains
[something, separated; a, couple of times; like, this] With, some; other, text
The result should be:
With, some; other, text
I want the macro to remove the brackets and everything within it for all marked cells. (I do not want to use search and replace function since I got a lot of these data and needs to repeat this procedure).
View 9 Replies
View Related
May 15, 2013
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies
View Related
Feb 20, 2014
I created a macro to create the beginning of a pivot table- just the rows and slicers, because when I tried making a longer macro to create the entire pivot table (formatting, etc) I couldn't get the macro to work.
So I do get all the vertical rows I want, and I do get all the slicers I want. But I get blank space. I think this is because the pivot table is created from another tab, and the length of data in that tab will vary from file to file (I'm doing another 30 or so of these, all with varying amounts of data, but the same data categories).
Anyway, I get slicers, but in addition to getting the categories I want, I also get "(blank)" below the names in the slicers. Is there a way to add some code to the macro to remove the blanks so I don't get this field?
I have copied and pasted the macro below, with identifying data changed.
View 4 Replies
View Related
Dec 11, 2013
Currently I've been able to remove the prefixes and suffixes using the replace option as those were consistent across the data set, I'm now left with a series of numbers that look like this:
11.225D2
11.24c1
11.28.r1
11.31.1.2h1
11.36.g1
11.39 A2
11.39B1
11.3c1
In most cases I need to remove the information after the last period. Some of the data has a space at the end, instead of a period and then some have no space or period but have the letter that needs to be dropped. I'm using xl 2011 for MAC.
View 6 Replies
View Related
Feb 17, 2012
In my spreadsheet, column A, I have a list is part #'s. I have found at the end of my part #'s there are several spaces in each cell. I need to remove these from the cells so that my formulas will be easier to use. Is there a way to do this? The part #'s very in length and format. They would look like this "100020x0 ".
View 2 Replies
View Related
