Excel 2010 :: Sort Worksheets Alphabetically And Keep The Data In Worksheets

May 15, 2013

I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.

View 2 Replies


ADVERTISEMENT

Excel 2010 :: Merging Multiple Worksheets Into One All Data Worksheet?

May 29, 2013

I know there are many ways to create an "All Data" worksheet. Copy & Paste is the most obvious or pasting named ranges into the new worksheet. I have a workbook with 48 tabs with up to 1000 rows of data per sheet. I need to merge each tab into one main "All Data" worksheet.

How to combine these 48 sheets in an easier way than the two options I already know (Copy/Past or Paste Named Range). Any Add-In's to Excel that can possibly do this? I am using Excel 2010.

How to make this "All Data" worksheet combining data from each sheet of the 48 tabs would be most useful.

View 2 Replies View Related

Sorting SOME Worksheets Alphabetically

Aug 27, 2009

I have been looking at Macros that sort worksheets alphabetically, but there are sheets within my workbook that I want to leave static. I have two sheets, names 'Start' and 'Spacer', what I would ideally like to have is a marco that will alphabetically arrange the sheets between these sheets, leaving the others where they are and obviously leaving 'Start' and 'Spacer' at the front and end of the range respectivly!

View 5 Replies View Related

Sort Data On All Worksheets ..

Sep 22, 2007

I have a worksheet of about 75000 rows so I have to use 2 worksheets. I want to sort the data in column A in ascending order so I want to start at 4999 until whatever number happens to be in row 65536 then continue sorting the next highest number in another sheet. I tried using this but it didn't work: ..

View 2 Replies View Related

Excel 2010 :: Highlight Same Values In Different Worksheets

Jul 26, 2013

I have "Worksheet1" with Columns A and B for IP Addresses, then Column C is for a device name.

I have "Worksheet2" with a range of IP Address from F5:I260

When I enter a new device and assign it the IP addresses on "Worksheet1", I would like the IP Address to highlight in "Worksheet2"

This way I can keep track of which IP address I have used. Excel 2010

View 7 Replies View Related

Excel 2010 :: How To Hide And Unhide Worksheets

Oct 4, 2013

I have an Excel 2010 file with 10 worksheets. I would like to set up two VBA codes to attached to a two button; one to hide specific worksheets, the other to unhide. The specific worksheets are:

Calculation Sheet
GL Receipt
Sheet2

View 5 Replies View Related

Excel 2010 :: Pasting Charts To Other Worksheets

Sep 29, 2011

I have a simple problem. I have many worksheets which all contain data in the first four columns. I want to be able to create a chart (a scatter chart) in the first worksheet which plots the data on that worksheet and then format it how I want it to look. This I can do.

Next, I want to copy and paste that graph into all the other worksheets, but have the pasted graphs display the data in that worksheet.

As it stands, in Excel 2010, all the pasted graphs keep showing the data in the original worksheet irrespective of which worksheet I now have them in. This seems to be different to older versions of Excel and is very annoying and has to be changed by hand which is very time consuming.

How can I make charts that don't have the worksheet name in the cell reference, or how can I paste a chart so that is updates the references to the same row and column but in the new worksheet?

I know I could copy and paste the entire worksheet and then manually copy the new data into that copy of the worksheet - but that is not a real solution to this problem.

View 2 Replies View Related

Sort Data On All Worksheets Active And Other

Aug 21, 2008

It sorts the ActiveSheet, but none of the other sheets and there's no runtime error. I am using this on a test workbook with the same data in 5 worksheets.

What's wrong with this code?

Sub SortSheets()

Dim ws As Worksheet

For Each ws In Worksheets

Cells.Sort Key1:=Range("A1"), Order1:=xlAscending, Header:= _
xlYes, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal

Next ws

End Sub

This looping structure works for PageSetUp, but not this Sort.

View 5 Replies View Related

Sort Data On Multiple Worksheets

Aug 16, 2006

I am using the code below to transfer data from a single sheet to approx'
200 sheets. These sheets are staff training sheets, one per staff member.
This code works great. What I would like to know is, is there a way to then sort the data on these sheets in decending order? I have tried on sheet change but this seems to stop the transfer to other pages.

Sub Tranfser()
Dim shtTemp As Worksheet
Dim lngOutRow As Long
Dim rngData As Range
For Each rngData In Range("A5", Range("A5").End(xlDown))
Set shtTemp = GetWorksheet(rngData.Offset(0, 1).Value)
If Not shtTemp Is Nothing Then ..........................

View 9 Replies View Related

Sort Data To Multiple Worksheets

Dec 14, 2006

We are trying to sort a spreadsheet by the data in column I. This column refers to a state. I need help creating a macro that can sort column I so that different states go into different worksheets.

States ME, NH, MA, RI, CT, VT go to a worksheet titled 357899, states NY, NJ would go into worksheet 351835, states MI, IN, OH would go into worksheet 351857, and everything else would go into worksheet 351836. The main data worksheet where the info is being sorted from is named All_Accounts. Column I has a header labeled State, so data actually starts in Row 2. I need the full rows copied to the new worksheets while leaving the main All_Accounts worksheet in tact.

View 9 Replies View Related

Sort Data Alphabetically In Particular Cell?

Jan 30, 2014

I have a long data in a single column with mixed letters. and column A (or H, K etc.) like this:

e1.JPG

How can i sort that cells to alphabetically like this?

e2.JPG

I already tried a function discussed this topic, but it's not working: [URL] .....

View 6 Replies View Related

Excel 2010 :: Hiding Worksheets When Closing File?

Apr 28, 2012

I am using MS Excel 2010.

What I want to Hide two worksheets and leave one worksheet open when I close out the file.

ws TOC will remain open when closing out the file
ws Rqmts will hide when closing out the file
ws Planning will hide when closing out the file

View 1 Replies View Related

Sort Data Ranges Across Multiple Worksheets

May 2, 2008

I have been asked to create an attendance worksheet where employee names and data are entered on a "main" worksheet and hours are entered on monthly worksheets. The names on the monthly worksheets are referenced from the main worksheet. Therefore, if I add a name and do a sort, the names on all pages will move, but the data will not. I imagine I will need an ID column to help sort. How do I make a macro to do the sort?

View 2 Replies View Related

Excel 2010 :: Find String And Delete Column On All Worksheets

Jul 9, 2014

Why my code is not working. I am working with Excel 2010. It will only delete the column on the active spreadsheet and not go to next worksheet. Not all worksheets contain the word "Broker".

[Code] ......

Not sure if its something to do with Activecell, try After:=ws.cells(1,1) or passing it in as the active cell stays the same i think.

View 3 Replies View Related

Excel 2010 :: MACRO - Copy All Worksheets Into Workbook Output

Aug 26, 2013

I need to copy all sheets from a workbook to a another workbook (create a copy of the one I am using) and this is the cod I have:

Sub NewReport()
Dim Workbook1 As Workbook
Dim Workbook2 As Workbook
With Application
.ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With

[code].....

The problem I have is that the output only have the sheet1!

I am using Excel 2010

View 4 Replies View Related

Excel 2010 :: Copying Worksheets From Multiple Workbooks Into Current Workbook?

Apr 2, 2014

Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.

im working on a excel 2010

This is what i got for the moment..

Sub LoopThroughDirectory()
Dim MyFile As String[code].....

View 1 Replies View Related

Excel 2010 :: Double-clicking On Pivot Table / Multiple Worksheets

May 31, 2011

I upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?

View 3 Replies View Related

Excel 2010 :: Printing Multiple Worksheets And Changing Printer Defaults

Jul 29, 2011

We have just refreshed our entire printer fleet to Xerox printers and as part of the project we have selected all defaults to B&W and duplex.

On a multi sheet excel file, If we click print then choose entire workbook and then change the print options to colour, it prints the only first worksheet in colour, and all the others in mono. i have read that excel treats each worksheet separately and does not cascade the changes made made in the first worksheet even if all sheets have been selected.

How can I get them all to print in colour?

We can set up another printer and change the defauts to colour but we dont want to go down that road and have 2 printers installed for each model.

Is there any code out there can will/ can change the properties of the first worksheet and cascade this throughout the workbook.

We use XP and W7 workstations and office 2003, 2007 and 2010. By the end of the year all workstations will be W7 and Office 2010.

View 2 Replies View Related

Excel 2010 :: Compare 2 Worksheets - Eliminate Those Falling Under Specific Criteria

Jul 2, 2012

I have 2 lists (excel 2010) that I need to compare (they are currently 2 files, but I can combine them into 1 file with 2 worksheets) if it would be better.

The first list is of "All Students" at our college. The second list is those students who live "ON campus". I need a list of those students who live OFF campus.

The common denominator headers in both lists is: A1 Last Name A2 First Name

I would like to keep the "All Students" list as my master as it contains all the data I need such as addresses.

Ideally, I would like to create a macro or lookup or whatever that will take everyone from the "ON" list and remove them from the "ALL" list, leaving me with the data I need.

View 4 Replies View Related

Excel 2010 :: Unhiding Specific Number Of Worksheets Based On Cell Value

Jun 26, 2013

I have been attempting to cobble together code from different forums for the past several hours to make a macro to unhide a specific number of worksheets based on a cell value, and have failed miserably thus far. Here are the specifics of what I have going on:

Microsoft Excel 2010
Workbook Name: TASERR Model - 06-26-13.xlsm

In this workbook, I have a worksheet called "Input". In cell C21 of that worksheet, workbook users will fill in a number between 1 and 50 (I have the value for that cell limited to those numbers through data validation). Based on the value in that cell (C21), I want to make a macro to unhide that specific number of hidden worksheets. I have 50 hidden worksheets which are named "Route (1)", "Route (2)", "Route (3)", etc.. If the value in cell C21 is 7, I want the worksheets named "Route (1)", "Route (2)", "Route (3)", "Route (4)", "Route (5)", "Route (6)", and "Route (7)" to unhide. If the value in cell C21 is 3, I want the worksheets named "Route (1)", "Route (2)", and "Route (3)" to unhide. I'm sure y'all can see the functionality I'm going for at this point.

View 8 Replies View Related

Excel 2010 :: Create Master List Worksheet From Lists Of Names On Several Worksheets

Jun 6, 2013

I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)

I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.

I've tried a few things to make it happen, but nothing has worked.

I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.

I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.

Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?

View 5 Replies View Related

Sort Data Alphabetically In One Particular Cell Without Retyping Data?

Jun 6, 2014

I would like to be able to sort the data in this one cell alphabetically without retyping the data .ie use a sort function but only for a cell.

For Example cell A1 contains Chris Brown Andy

No commas there. Names are seperated only by spaces.

What function should I use in order to get Andy Brown Chris ?

View 5 Replies View Related

Sort Worksheets Using Custom Sort To Choose Certain Word?

May 30, 2012

As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.

is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.

View 1 Replies View Related

Excel 2010 :: How To Filter / Sort Data Based On Partial Match Of Data In Cell

Apr 16, 2013

I am using Excel 2010. I am a novice user.

I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.

pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d

[Code] .........

Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.

pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d

[Code] ......

So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.

reg_[0-9]+_+[0-9]+/d

The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".

Similarly folder paths names can contain "_" so can't split string on this either.

As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.

I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:

Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function

If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?

Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g

26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d

So my table would show the name "data_out_reg" and the range of values 8-32

View 1 Replies View Related

Excel 2010 :: Create Macro Button To Clear Multiple Cells On Multiple Worksheets?

Jul 2, 2014

I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.

On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells

B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42

On all other 'Caravan sheets' I want to clear the contents of cells

D4 & D5
E4, E5, E22, E23, E41 & E42

It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead

View 8 Replies View Related

Excel 2010 :: Summary All Statement From 4 Worksheets And To Summary All Total ICC

Dec 23, 2013

excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.

Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.

Sample Statement below

"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?

View 2 Replies View Related

Clearing Data In All Worksheets Except Last 2 Worksheets

Nov 10, 2006

I need to write VBA code to clear all Values, all values beginning with an = sign for eg = 9725, except formulas and text on all my worksheets, except the last 2 worksheets.

View 9 Replies View Related

Sort Worksheets By Name

Aug 30, 2007

I have a workbook with MANY worksheets. The first 17 are static, as well as the 18th sheet on to the end,but there can be many sheets added in between sheets 17 and 18 (up to 56 added) all named Origin 1, Origin 2....Origin 56. Users can add these sheets in any order as many times as they want, but eventually the order of the sheets will not be in ascending order. I wanted to know how to organize the sheets in order of Origin 1, Origin 2, Origin 3, etc after the user adds new sheets with the macro. I can find out how to add it to my current module on my own.

View 5 Replies View Related

Worksheets Sort Does Not Work

Apr 17, 2014

I need to sort out 4 columns D,B,A,L in ascending order for 5 different worksheets from range A7 to BW.

The sorting start at row 7. I have created a VBA code but got error.

View 9 Replies View Related

VBA To Sort Worksheets From A List

May 7, 2009

Is it possible to sort numerous worksheets based off a list of cells that are the names of the worksheets within the same file? For example my worksheet names are:

YTD Texas
YTD Florida
Period Texas
Period Florida

I can sort the sheets by alpha but it puts the two YTD worksheets together when I need the two Texas sheets side by side (I need this on a file that contains over 100 worksheets otherwise I would do it manually) I was wondering if I could create my order of sheet name in another worksheet and reference that list through vba code?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved