Macro / VBA To Pull Data From Worksheets Based On Name
Jul 10, 2014
I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.
Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).
Column A Column B
PIN
CID
SIP
View 9 Replies
ADVERTISEMENT
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Mar 6, 2014
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
View 4 Replies
View Related
Mar 14, 2009
I have on inventory sheet that has all the data in each cell 2612 to be exact! That changes month to month with deletions.
The format is: Sheet 2
A/B/
334702/UEMR88QX
334703/UEMR85QX
334704/UEMR81QX
334707/UEMR8JQX
The master worksheet has about 5000 items and the (A and B) data are both on it with other data ranging from (A-Y). My question is how do I have a cell look up data and return that it exists or doesn’t exist on the inventory sheet?
Master
A/B/C/D/E/
35/ 465/881676311350/311350/UEMR8ZTU
36/469/881676310722/310722/UEMR8V5V
37/483/881676310924/310924/UEMR8XYU
38/805/881676331096/331096/UEMR8J13
My other problem I need to take that months inventory list and have it look at the master list and return the system number from the master list (B) next to the matching inventory number (C). Allowing me to cross match inventory to master each month and save inventory worksheet each month.
I know I can copy the column and past is as a value so I won’t lose the numbers as the master changes but getting the data onto that months inventory has been a pain.
View 6 Replies
View Related
Feb 8, 2014
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:Â
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:Â
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
View 2 Replies
View Related
Jul 24, 2014
Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
View 6 Replies
View Related
Nov 14, 2012
i have a sheet that i have been creating to pull information based on two things. The criteria is an emplyee # and the second is a date.
The data needs to be organized onto Sheet4. The Employee # will already be on Sheet4, so i have been trying to use that with Vlookup / hlookup with no success as i can't seem to get it to find the correct Date and place the data correctly.
Sheet4 layout:
Completed (with respective data from Sheet2)
A
B
C
D
E
1
[code]....
the data is located in Sheet2 (Emplyoee # is always in Column A, and the Date is always in Column B).
the data needs to be pulled into Sheet4. Essentially making the horizontal data of Sheet2, Vertical on Sheet4 under the respective date column.
Sheet2 Layout:
A
B
C
D
E
F
G
H
I
J
[code].....
View 3 Replies
View Related
Apr 23, 2014
I am trying to have my spreadsheet pull data from one tab and cell if they match another.
Tab "Ag Orders" column H, I enter data in lets say cell H37. Whatever I enter, if it matches tab "reference List" C:C, then "ag orders" column G (specifically G37) should enter the data in "reference List" D:D
So since in H37 I entered 34000 - 314620, G37 should pull in Farm Operations since on the referene list tab that string of numbers (C11 matches up with D11)
a little confusing but I hope it makes sense.
13-14 budget-AG.xlsm
This isn't the exact formula I used but something like it and it wasn't working. It wouldn't match the data up correctly on a few of the department names
=IFERROR(LOOKUP(H35,("11000 - 311010","11000 - 311020","11000 - 311510","11000 - 311610","11000 - 312010","17800 - 311010","17800 - 311510","17800 - 312010","34000 - 314610","34000 - 314620","34000 - 314640","34000 - 314660","34000 - 314680","34000 - 314690","81008 - 840008","81009 - 840009","13863 - 312040","13864 - 312050","71060 - 521620"),
[Code] ..........
View 1 Replies
View Related
Jul 7, 2014
I am moving along in my masters project and I am having a problem organizing some data I got dumped with.
What I have is a 196 x 196 matrix of the worlds countries and the distance between each one. So each Row has a title header of a country and each column has a country and the cells between the two are the distance of said countries.
On another sheet I have about 10 000 different combinations of dates/years/months ect that I need to populate in order for Stata to work properly.
Rather than manually enter thse in one by one or copy paste what I would like to do is write a code that would do something like this.
If on sheet 2 (the combination sheet) A3 = Afghanistain and C3 = China than F3 = The China/Afghanistain intersection (In this case AN3 on the Distance Sheet)
I am having problems because I can't see to figure out a way to have a program lookup the intersection and give me the China/Afghanistan number based on all the conditions. I am assuming I need to use a matrix lookup of some sort. This way when I do some like Canada/Denmark on the Combination sheet, it will automatically look up and populate the distance from the distance sheet (That being AZ33).
View 10 Replies
View Related
Apr 22, 2014
I'm compiling data from field reps that comes in a big spread sheet. I want to pull the rows out that fall into a certain date range. For example, if it falls between January and March. How would I do this?
Company 1
3/5/14
$54,000
Q1
Phase I
10%
Company 2
2/1/14
$16,000
Q4
Phase II
80%
Company 3
12/1/13
$18,000
Q2
Phase I
20%
View 4 Replies
View Related
Nov 8, 2006
I have 2 worksheets (Sheet1 and Sheet2). Sheet 1 contains around 3000 records with multiple fields (columns). Column A contains the ID number. Sheet 2 contains some records with different fields except for the ID number which is common.
I need a macro to retrieve information from sheet1 and copy it to sheet 2 based on the ID Number; i.e the macro needs to get the ID number from sheet2, locate it in sheet1 and copy the data from column D in sheet1 for that particular record and paste it in sheet2.
View 7 Replies
View Related
Oct 18, 2004
I want to create a macro that will automatically pull data from the web by simply pressing a macro button. I assume that this would be an easy task if the data is from a website with a specific URL such as [URL]
However, there are times when someone must enter data into the web to pull a specific report that does not have a unique URL. Is there anyway to create data fields in excel that would allow an individual to type in specific information (name, report period, etc.), and then press a macro button that would go out to the web, enter the information automatically, and export it as an excel file. I realize that this is probably substatially more difficult than my first question.
View 9 Replies
View Related
Feb 4, 2013
Here is what I have and am trying to do:
I entered the date and day in this format in multiple sheets in workbook 1 (named 0101, 0102, 0103) from the start of the year to last night (B2:C4):
Date:January 01, 2013
Day:Tuesday
I then entered all the data needed below that (B5:E26):
TimeTransactionsTotal SalesAverage Sales
12:0039 $352.97 $9.05
13:0053 $416.98 $7.87
14:0044 $339.42 $7.71
15:0043 $304.96 $7.09
etc.....
In workbook 2, I have sheets named for each day of the week. I would like to take the information from the previous three weeks for each corresponding day from workbook 1 and put the averaged data into another table with the data all formatted the same in workbook 2. This way, each week when I go into the aggregate file (workbook 2), I can look at the chart I'll create and see the average of the past three weeks transactions, total sales, and average sales for each hour of the business day and be able to staff accordingly (assuming the trend continues).
View 1 Replies
View Related
Jun 15, 2006
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
View 9 Replies
View Related
Oct 17, 2006
I'm trying to make a floor plan which shows what seats are available depending on the time it is. So I made sheet1 = to the map (where the seats are located), sheet2 - rows = seat #'s, columns = Time (broken down by half hours). Now i have conditional format to show "t" in red (which means taken), "f" in blue (which means free), and "n" to show in gray (which means not working).
What i need is example - Seat # 200 in sheet 1 to show red, blue, or gray depending on the value in the row that corespond to this seat and the column that corespond to the current time.
View 9 Replies
View Related
Apr 28, 2008
I want to pull data from closed workbook based on cell values of open workbook of column B and the source file name is on cell J1. Actually I save monthly files and opening balnce of current month should take vakues from previous month file.
Suppose current month is May 2008. Then Column Column D for May month shold take value from column G of April 2008. For simplicity the previous month’s name and thus source file name will be placed on cell J1.
The code should loop from column B of source file and current May 2008 file and should pull values for only those items which are in the current file in the Column B. Thus those products which are deleted or newly added item in the current item should not copied. Though for new item no name will be thre in the source file but for deleted items the item might be there in the source file but the code should ignore those value.
View 4 Replies
View Related
Nov 29, 2011
I Have a workbook which consists of 50 worksheets and i use Edit query window to pull the data from oracle on all these sheets. We run this once in a month. I have to go to every sheet and execute this code which is time consuming and i have to change the date value everytime. macro that can execute this process at once and we should give the date only once.I use OLEDB driver to connect to oracle.
Attached is the Command line code.
Select protocol, patient, Page, (date_indexed) Indexed,(first_entry_date) FirstPass,( second_entry_date) SecondPass,trim( modified_date) modified, trim(CRF_ERROR_COMMENT) Comments from JJA38377_96_crf where date_indexed>='1-May-11' and date_indexed
View 2 Replies
View Related
Mar 4, 2007
I need to pull out data from a word file(can open in excel 2003) which has several different rows with data in a certain format each time.
I want to take the data from sheet #1 in the format
________
where the underline always equals an 8 digit number that directly follows that unique text(no spaces)
and pull out all the 8 digit numbers from the sheet and put them into sheet #2 that my macro creates.
Also the additional rub is that I need to pull only the unique 8 digit numbers as there will be several repeats.
View 9 Replies
View Related
Jul 6, 2014
I'm trying to compile a spread sheet that will pull the play by play logs from the NHL website.
The logs are listed in order.
Game 1 is [URL]... Game 2 is [URL]... etc etc
I am trying to put them all on one spreadsheet. (or to do it in batches of 100, or 50 or whatever the size of the file allows)
View 1 Replies
View Related
Dec 13, 2013
What I want to do is pull data from columns A,B,C,D in 3 other closed workbooks (export.csv, export1.csv, & export2.csv) to my main workbook (Thunder.xlsm)and append that data in columns A-D on my main workbook. In addition I created a list of 10 names (but need to expand or delete from this list as personnel change) in Column O that I would like to filter the data in A-D. The names in the list must find the data I want to keep in column D, the rest I want to delete (not the entire row, just A-D for that particular row that does not match the criteria in column O, and shift those cells up).
I've attached a sample spreadsheet that will clarify what I am asking. I'm preferably asking for 2 macro's, one for the pull of data, and the other for the filtering.
Column A
Column B
Column C
Column D
[Code]....
View 1 Replies
View Related
May 2, 2008
I need a macro which collects data from two files and dumps it into a separate spreadsheet. I need it to prompt the user to select the two files, since the file names may change.
Once a user selects the files, the macro simply opens them, grabs the data (the data sits on a single sheet in each file) and pastes it into a file, and closes the 2 data files.
The Data sits in A7:N20 on both files.
View 14 Replies
View Related
Jan 21, 2010
I need to place a value in cell B on sheet 2 of a workbook. The value I need is stored in C10 on all other worksheets in the same workbook. The name of each worksheet is stored in Column A of sheet 2 (Rows 3 through 404). How do I get the value from C10 on each worksheet into the corresponding row on Sheet 2?
I have Excel for Auditors and there is code on page 201 but it is the reverse of what I need. I need to get the value from the worksheets as opposed to moving a value to the corresponding worksheet.
Example:
Sheet 2
Column A Row 1 = Worksheet name
Column B Row 1 = Need Cell C10 value from worksheet name referenced in A
View 9 Replies
View Related
Jun 3, 2014
How do I copy a Pull Down Menu from WS1 to all other Worksheets?
View 4 Replies
View Related
Aug 8, 2014
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
View 5 Replies
View Related
Apr 5, 2007
I just started playing with creating my own macros. I've written a macro to pull all the names of the worksheets in a workbook, now what I want to do is write a piece of code that will pull data from a cell in those worksheets.
So for instance I have all my worksheet names in cell A1 to A10, I want to pull the data from cell E1 from every worksheet in A1 to A10. Can someone help me with a sample code to work with. I'm still reading Power Progamming haven't gotten so far yet.
View 9 Replies
View Related
Oct 24, 2008
I need to be able to pull information from a "master database" into seperate worksheets. Here is my problem. When I use a vlookup and my identifer is say "office property" then the vlookup will only pull the first "office property" and not retrieve any of the remaining "office property" rows.
View 9 Replies
View Related
Aug 25, 2009
I'm having a little trouble figuring out what formula to use for situation. I have 5 columns of information.
Column A = School # of current school
Column B = School 1 Name
Column C = School 2 Name
Column D = School 3 Name
Column E = School 4 Name
What I want to do is in Column F to look through a row of information and find the current school.
So:
If A="1", pull from B
If A="2", pull from C
If A="3", pull from D
If A="4", pull from E
I tried doing a VLOOKUP table, but I think I'd have to do one for every row, but I could be wrong. I also thought of INDEX(MATCH), but I couldn't quite figure it out.
View 2 Replies
View Related
Sep 15, 2005
Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
View 9 Replies
View Related
Jun 19, 2014
I am trying to divide a table of data (7 Columns, 500-1000'ish rows) into individual worksheets based on any unique values in column. There may be anywhere from 10-30 instances of the same value in Column C, and I need to bring all rows of each unique instance into a newly created worksheet to be labelled the same as the value in Column C.
The RAW data will be updated monthly by keeping a template file copying and pasting data, therefore I am hoping to have a "SORT" button with this Macro assigned to it. I have quickly thrown together a sample workbook with how the RAW DATA will be pasted into the file, with additional sheets showing how I would like the data split and organised.
View 2 Replies
View Related
