Macro To Create And Rename Multiple Worksheet And Then Placing Relevant Data
Feb 24, 2014
I want to find a way to create multiple worksheets and matching data to be placed on appropriate sheets.
Here are more details (Please check the attached sheet screenshot as well):
Excel_Macro_Requirement.jpg
In a workbook, there is a "Master-Sheet". This master sheet contains 8 columns.
I want to create as many new worksheets after master sheet as the values are there in column B (Column 2 i.e. Ad Group). In above attached screenshot, there are 8 values (B2:B9 or A-H). So, I would like to create 8 new worksheets after the master sheet. Also, I want to rename them based on their value from Ad Group column.
Each newly created worksheet should have same columns as the master sheet . Same 8 columns with their name intact.
Finally, I want all matching data of the Ad Group values to be placed on their respective newly created worksheet. For example, worksheet A should have A2:H2 data. Worksheet B should have A3:H3 data, and so on.
Please note that same ad group may have more than one row data. But I don't want to create multiple worksheet of same name ad group. The worksheet should be just one, but all matching data should be placed in that one sheet.
I know it is a bit complex task, but I am sure there would be a way to perform this automatically - probably a macro.
I tried recording a macro to add to a new worksheet, but it gives error while running.
Issue as I understand is, by default excel gives a new worksheet a name (Say Sheet 4), and when u run macro worksheet, new created name may be different.
I need to have many users press a button within the excel sheet that duplicates the form from the current page, opening a new tab (copying the form) that also prompts to input a specific name e.g. "Enter date and day or night shift" to name the tab itself.
I have just worked out how to put a Command Button in and used the above code to create the new page assigning the code to it.
I need the "my sheet" to be prompted and customisable.
I have the following code in my vb app. It creates the new worksheet, gives it the corect name, copies all of the existing data from an existing worksheet and pastes it in the new worksheet, but I can not get it to refresh the formulas. When I look at the formulas in the new sheet they reference back to the MasterSheet worksheet(which is my template I copy and paste from when making a new worksheet)
I have two worksheets and need to consolidate the relevant data into one worksheet.
On both worksheets there is one column that I can relate to the other worksheet, called "TKR", which contains a code in each field, such as "000210 K", or "004170KS". Both worksheets have this column. In the first worksheet, called POS, each "TKR" code tells me that this is a relevant "TKR" code in the DB worksheet. I am not interested in the data in POS, just the code to tell me which records are relevant in DB.
In DB is the information I need to extract. But in this worksheet, there are many irrelevant records, which I need to ignore. I need to reference the data in the TKR column in the POS worksheet with the data in the TKR column of the DB worksheet, then extract the record from the DB worksheet and place it in a new worksheet, along with each other extracted record, compiling a consolodated list. I could do this by cut and paste, but I have 30 different databases, both POS and DB, each containing up to 6000 records.
In the POS worksheet there is more than one record for each "TKR" code. I can run an Advanced Filter to extract a consolidated list of "TKR" codes. I am stumped however on how to then use that list to reference the same codes in the DB worksheet and extract the records to a new sheet.
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet. The final sheet is what the end product looks like.
I have created an appointment schedule spreadsheet. Once I get the spreadsheet running smoothly, I would like to create a worksheet for every day of the year that we are open.
I have decided to have one main folder with 26 subfolders in it. In each of those 26 subfolders, there will be one workbook with 12 worksheets in it. That will be two weeks worth of appointments as we are open Mon-Sat. Of course I want to name the worksheet tabs at the bottom of the workbook according to the appropriate calendar date. Then there is also a cell at the top of each page that also has the date, the same as the date on the tab. Just wondering if there is a simple way to create a macro to rename all these worksheet tabs, or if I have to physically open up each workbook, and rename all the worksheet tabs according to the calendar date. Then once the worksheet tab is named, can you make it automatically put the same date into Cell A1?
I have about 200 excel workbooks in one folder, each with a different workbook name, and each workbook has one sheet, but that sheet has a different name in each workbook. I want to make the sheet name the same (sheet 1) in all the workbooks.
I am currently doing an excel database of students application. I want a macro that creates a duplicate of a template sheet and renaming it based on the name of the student. Meaning once a name appears in the name cell, a sheet of that particular name is automatically created. At the same time, i want all the data regarding the applying student to appear the newly created sheet as shown in the attached file.
I am having trouble renaming an active sheet from a Macro I stored in the personal.xls file. I want the active sheet to be renamed to "Data_Source" and then the rest of the code can kick in. Instead of renaming the current worksheet it creates a new one.
Is it possible to write a macro that will rename a worksheet based on the value of the cell?
For instance, if cell a1 has the value Test, the worksheet should be named Test. If I change the value of the cell to say Test 1, the worksheet should automatically rename itself to Test 1.
I'd like a macro to rename a worksheet from its current name of "FullScreen (2)" to say Numbers, plus today's date (without the plus) For example... Numbers as of 02-17-09
I have to complete information providing dates and names for a long number of individuals. Is it possible to set up the spreadsheet so that if you enter a date next a persons details in on worksheet their information is automatically updated in the relevant ones?
The first sheet is the row data given to me, the second one is where I want my data to be analysed automatically by macros.
I managed to create a pivot table manually to give me the info I want but then I still have to copy all the results from the pivot table sheet to my analysis sheet.
How can I create a macro able to do all that by it self? I tried to record a macro using the recorder but then when I try to play it it gives me an error straight at the beginning in the definition of the pivot table I think.
An example of what I want the pivot table to do is: in the first sheet, go in the small table in column K and L, take the value of L1, then in the row data in column A to J, in column C look for the value in L1, once found, look for the value 1 in column J then do the average on the values in column E and put the result in my second sheet in cell F5 then do the same but look for 2 in column J and put it in F8, then 3 in F11, ... until 7 found (the data is in ss.000 and so the results in the second sheet should be formated the same way) then do the same all over again for value in L2 etc etc etc
this should be done for the 6 values in column L, each having values up to 7 in the J column.
Then I need to do the same for other columns and not only averages but minimums as well but I can adapt the code I think.
I have 400ish departmental budget files in a folder that I need to upload to a Sharepoint doc library. The files in the folder will have to exactly match the files we already have set up in sharepoint in order to upload them to the sharepoint site. As it stands now there is only one consistency between the sharepoint files and the budget files in the folder, which is the department number (which every file in both begins with).
I'm thinking some sort of macro will let me insert a sheet into each of the files in the budget folder, which would have a formula that pulls the department number from a certain sheet in the file, and produce the file name I want into a certain cell. Then I would like a macro that goes into each file and renames it based on that cell. I'd like to know if this is possible and if there may be a better way to do it.
I have a workbook that filters the data on the worksheet "Reports" this then adds new worksheets and copies and pastes the relevant data that has been sorted, this is done by the name in column "B".
What I need is to rename the new worksheets with the data that is in cell "B2" of the new sheets.
This is a relatively long list - 1000's. What I'd like to do is create a macro that sorts by brand, and at every change in Brand, copy the user details (Username, firstname, lastname, email) to another workbook with those labels at the top of the table. Upon completion, it saves the workbook with the name of the appropriate brand.
E.g. I'd have 3 workbooks: - BrandA.xlsx - with the 2 user listed - BrandB.xlsx - with the 1 user listed - BrandC.xlsx - with the 1 user listed
I need to create a macro to move variable multiple horizontal data to vertical format with certain infomation on horizontal will be duplicated following that variables. It's looks like below where you can see variables data in column F, G, H and I are moved vertically and at the same time column A, B, C, D and E will be duplicated following the variables allocation. I've tried to use transpose but it too manual and now looking suitable macro to help on this function
I have a multi worskheet document and i want to be able to create a macro that will search individual cells in a range on each sheet and if it locates a 3 letter mneumonic (STK in this case), it will then copy that data for the whole row and paste on an additional worksheet. I also need the data pasted on the new worksheet to be protected ie not overwritten when the macro runs again. So this mneumonic could exist anywhere in column A (A1,A500).
I have an expanding worksheet and would like to move a button so that it is always near the bottom of the worksheet data. When the button is pressed it reworks the worksheet and adds in some additional rows (up to 10 max). I'd like it so that the procedure also moves the button down keeping it in line with approximately the last row of data but not sure how to do this with vba...
Part of my code adds a Worksheet to the selected Workbook and then re-orders them alphabetically, but one of the Worksheets (Called home) should always remain at position 1. Is there a way to dictate exactly which postion it should be in so that I can place it there after the sort is complete?
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String) Dim DVListName As String DVListName = "DV" & sListName Application.Goto Reference:=sListName With Selection.Validation .Delete .Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _ xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
I have created a spreadsheet for internal use in my workplace that logs task by members of staff, What I am trying to achieve is when someone selects from a drop down box that a task has been complete I want the task to automatically move to another worksheet for the relevant month, as I will have worksheets for every month logging all the past tasks that have been assigned. I believe an IF statement should do the trick, but I am having no luck so far.
I have a simple one-column section (column A) of values in Sheet1:
Column-A Hal Sonny Betty Adam James
I would like to sort this, but have the sorted results displayed in Column-A of Sheet2.
How can I do this?
Note: I need to be able build flexibility into this such that I can add names to the bottom of the list in Sheet1, knowing that the results in Sheet2 will be able to accomodate the additions.
I have a worksheet (named "A") contains all data, and would like to have a macro to searching in A under condition of date,and return those data to in a cell of different worksheets (saying worksheet B, C, D). and everytime i run the macro previous data wouldn't be replaced by new one. Example: worksheet A has data
worksheetname date number B 01/01 10 B 02/01 11 B 03/01 12 C 01/01 13 C 02/01 14 C 03/01 15
