I have multiple IF functions in a formula and found out that the maximum allowed is 7 and should use Lookup instead. The formula is to calculate the Present Value of an amount with the corresponding interest rates and number of days left.
View 3 Replies
I've attached a sample of the data I'm using.
I have two spreadsheets (the samples for which I have shown side by side in Sheet 1 of the attached file).
Spreadsheet 1 is about 30,000 rows and too large for me to change the formatting and structure.
Spreadsheet 2 is the output I need and the format is required by other stakeholders.
In spreadsheet 1 I want to sum quantity in stock for Type 1, Type 2 and Type 3 for each product and allocate it to spreadsheet 2 according to the month in which the product expires. For example, there will be a total of 92 units of product 413302 which will expire in Nov, 2014. Therefore I want 92 to be placed in cell N6 of Spreadsheet 2.
Unfortunately the product number is not unique - there are multiple sub products in spreadsheet 1 but they all have the same quantities of stock. The sub products are referenced in other parts of the report so I can't consolidate by Product Number. This also prevents me from using the SUMIFS function as it will duplicate the number found in the sub products.
What I need, perhaps in a combination of functions, is to find the first instance of product 413302 in Spreadsheet 1 that is expiring in Nov 14, sum the product types and give the result in cell N6 of Spreadsheet 2.
I've got an indexmatch that works great
=IF(ISERROR(INDEX(accountstaff,MATCH(B$20,INDEX(accountstaff,,1),0),MATCH($ A55,INDEX(accountstaff,1,),0))),0,INDEX(accountstaff,MATCH(B$20,INDEX(accou ntstaff,,1),0),MATCH($A55,INDEX(accountstaff,1,),0)))
But I need to incorporate IF statement based on varying levels of revenue and think VBA will be less cumbersome, but don't know how to combine else if and index match.
I am trying to accomplish this:
IF B$20 (which is a dollar amount is = X, then index, match....
IF B$20 is > Y but < Z, then index, match...
I have a spreadsheet that is by:
Purchase Date (column A)
Sales Date(column B)
Quantity(column C)
Name (column D)
Gain/loss (column E)
The spreadsheet is sorted by name in ascending order and also by quantity in ascending order.
Assuming row 1 is the heading. If D2 (name)= the same as another D cell and it's quantity i.e. C2 is negative, while the other D cell with the same name as D2 has a positive quantity i.e. corresponding C cell, and if the date in B2 is greater than date in column A of the other cell where it's D cell matches D2 and has a positive quantity, then in I would like "possible" to display in F2.
I have included an attachment to better illustrate what I have described above, because I am not sure if I am clear enough.
I have a table in one sheet as follows: .....
View 9 Replies View RelatedI'm at an impass and need some help please. I'm trying to create a spreadsheet that will look up UNSORTED data in Column A and return the value of the corresponding Row data in the adjacent column. Can this be done? It is my understanding that LOOKUP functions only work with sorted, ascending data, but this is not possible with the data I'm trying to analyze.
(eg. COLUMN A - contains unsorted list of names
COLUMN B - contains numbers indicating skill level of the person in the next column
I need the formula to look at column A, pick out "Joe Smith" and return the number value from COLUMN B)
What I would like to do is have a master workbook that I can import different .csv files into as a new worksheet. Then calculations will be run on the values that are imported. My goal is to select a column and have corresponding list update the values. After that formulas will run on the calculations. I have got the import csv file down using VBA. The problem I was running into was with the Data Validation. Since I was overwriting my existing sheet I would get a #REF error because the link was broken. So I have worked my way around this for the list using the OFFSETSHEET Function:
VB:
Function SHEETOFFSET(offset, Ref)
[COLOR=#0000ff] ' Returns cell contents at Ref, in sheet offset[/COLOR]
Application.Volatile
With Application.Caller.Parent
SHEETOFFSET = .Parent.Sheets(.Index + offset) _
.Range(Ref.Address).Value
End With
End Function
This returns a value to a row in my mater sheet and I reference this for the data validation list.
However, I get the same problem when working with the HLookup function, the #REF error occurs. So far the only way I have figured out to work around this is to create another sheet that dynamically updates its values using the same OFFSETSHEET function, and my master sheet then references it.
Is there a lookup function available that keeps the line breaks in from the lookup array? As shown in the example the Vlookup omits them, I have also tried with Index/Match, but its the same story.
View 3 Replies View RelatedI have a sheet listing comission rate eg. sales less than $200, the rate is
..5%, less than 300, the rate is 1%..etc.
Then i have another table showing different sales value of different workers. How do i find the commission rate per worker using lookup functions??
I have a range of cells (say A1:D8).
I wanna find the address (say $B$2) of the minimum value in that range.
This command does it but it only works on a column. it does not accept a range spanning more than one column.
=CELL("address",INDEX(B2:B7,MATCH(MIN(B2:B7),B2:B7,0)))
this will tell me the address of the minimum value.. but in a column... I need a range of many columns.
So I tried converting things to a Table.. but it never worked. basically the MATCH command is my problem. It only accepts single-column-ed ranges.
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
What I a trying to do is I have a sheet with 3 pages and am using excel auto complete to change data in my cells to save typing out every time. for example if I type 22.. in sheet 1 cell a1 and tab away, it replaces it with an address and post code stored in auto complete. is it possible to store my info in another sheet, if it matches the 22.. in say sheet 3 replace it with the text in the next cell to the right
View 5 Replies View RelatedI have a Workbook(wb1) that pulls information based off of IF(and( and vlookups from multiple other workbooks(wb2 thru wb12). Is there a way the member typing in wb2 - wb12 able to change the Tab name one each sheet? Since the formulas i use use the tab name on the sheets for referencing. I'm hoping to do the example with out any user input.
Example ....
looking up a value in a table.
So I have this value on one worksheet: Example 1
Now, I have a table on the second worksheet with a bunch of id's in list of 1-100. Now, each product has one of those id's and also has a product name.
So, right now, I am trying to figure out what the product name would be if my id specified is a valid id in the table on worksheet 2. Now, if the specified id isn't a valid id in the table (for example 105) I need the cell the say, "No Product".
Here is my if function: =IF(what do I put here,VLOOKUP($A$1,Table1,2), "Product Not Found")
So what do I put for the logical test to find out if the id is a valid id in the table that i'm looking up the id's.
The bottom line: If you get an error like #Value! or #N/A, or any of those types of errors, how can you rename the cell so say something else instead of that.
We have a list of typed information (see attached) in which we would like to remove some words and simply replace with a space "". In addition to this: Unfortunately, folks tend to mistype or misspell words, add extra digits, etc, and for those mistakes we would like to replace them with corrections. Therefore, for this problem, we have a Replacement Table and the Subject Data, an example of which is shown in the attachment. I have posted a slightly similar problem on Ozgrid recently:
Replace Words In Cell Matching Those In A List
and in that link, the following UDF was proposed:
Function ReplaceIfInList(rList As Range, rCell As Range, _
strReplacement As String) As String
Dim rLoop As Range
If rCell = "" Then Exit Function
For Each rLoop In rList
If ReplaceIfInList = vbNullString Then
ReplaceIfInList = Replace(rCell, rLoop, strReplacement)
Else
ReplaceIfInList = Replace(ReplaceIfInList, rLoop, strReplacement)
End If
Next rLoop
End Function
This worked great, but at the time i posted this, I did not have the foresight to anticipate the flexibility in what the replacement text would be (the above code always replaces with a ""). THIS new Post is asking the following:
Is there a way to define (or modify the above) User Defined Formula that will analyze the words typed in a cell, which are typically separated by spaces (or on accident, multiple spaces), and essentially use the Replacement Table as a reference for what word to replace with?
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
For the odds range, i have already two cells(the upper(F9) and the lower(E9)) and i have a cell named the current odd(G9). What are the formula together for the attribut cell(H9) for the following data:
1.0 : The current price is outside and below the odds range spread. For example, if the range is between 2,00 and 2,20, the range’s attribute will be 1.0 if the current price is below 2,00
NOTE: Obviously the formula for this one is =IF(G9
1.1 : The current price is on the bottom edge of the “odds
range” figure. For example, if the range is between 2,00
and 2,20, the range’s attribute will be 1.1 if the current
price is 2,00
NOTE: The formula for this one would be =IF(G9=E9,1.1)
1.2 : The current price is inside the “odds range” spread
and is placed one or two clicks from the bottom edge. For
example if the range is between 2,00 and 2,20, the range’s
attribute will be 1.2 if the current price is 2,02 or 2,04
NOTE: I have a hard time creating a formula with this one.
2.0 : The current price is outside and above the “odds
range” spread. For example, if the range is between 2,00
and 2,20, the range’s attribute will be 2.0 if the current
price is above 2,20
NOTE: The formula would be =IF(G9>F9,2.0)
I'm essentially trying to place a column that is largely based on another....a function that will calculate the following information
Carriers with 1 Vehicle - 25.00
Carriers with 2-4 Vehicles - 100.00
Carriers with 5-9 Vehicles - 200.00
Carriers with 10-24 vehicles - 400.00
Carriers with 25-49 vehicles - 750.00
Carriers with 50+ vehicles - 1500.00
In other words.
One column in my spreadsheet has number of vehicles. I want another column that will provide the according application fee as found in the information above.
If I want to create a function or sub that can be used by any userform or macro that I create for a workbook:
Where would I define that function? Within the Module?
Do I define it as Public?
I've tried many variations but I can't seem to find a solution - I hope you can help. I'd like a formula that will ideally achieve the following:
IF B5:F5 all contain the letter y then return "Pass"
IF B5:F5 AND G5:K5 all contain the letter y then return "Merit"
IF B5:F5 AND G5:K5 AND L5:K5 all contain the letter y then return "Distinction"
IF B5:F5 is blank return blank
IF there are Y's in B5:F5 and the total < 5 return "Fail"
I did a sample sheet to show the desired output but don't know if this forum supports attachments.
Is there a way to SET a RANGE that can be used for further editing without the need to specify the range each time for each function to be perfomed?
I have a pile of Data, with a Calendar date and 4 columns of data for each date.
I want to make a summary for each year separately of one column of data (Total PL). How can I set a condtion that it will output a summary of data for a given year, e.g. 1990?
Even more useful might be setting up a table for each year, where I will be able to perform easy function like SUM, MAX, MIN but it will use data only from the specific Year in each row.
- Is there a way to make it simpler, but not having to specify the RANGE for each Year for each Function?
* I have a complex Excel workbook with several worksheets.
* The first worksheet is for raw data, which consists of a single string of data, separated by spaces, to be uploaded to a mainframe. There is no consistent pattern of length of data or strings in between pieces of data, which can vary widely. An example of the data would be something like this:
XXXXX YYYYY NN XXXXXXX
* For testing purposes, I need to come up with a way to parse the data for easier viewing. The current approach is this:
* Take the string and divide it up into individual cells by using the MID function. In the above approach, this would split the data into four (4) different cells.
This is going to be a very complex workbook with data strings that can have 20+ elements in them, and have lots of separate records, etc. While this way should work (if everything is entered perfectly and no data structures ever change, etc.),
I am trying to somehow use multiple IF functions. I was able to use one IF function to disply '--' in a cell if a particular formula = 0. However I ran into a problem when negative values were displayed. I wanted the value to be a positive number. I thought I could use another IF function to multiply the formulas contents by -1 if it were <0, but I keep getting a #VALUE error in my cells. Is there a way I can have multiple conditions?
View 2 Replies View RelatedI am trying to create a custom function to act much like the database capabilities of excel in summing a column based upon multiple criteria of other columns. First, before I get too far, does anyone have an already built custom VBA function that will accomplish this? I find that using the built-in database functionality in excel is VERY slow!
Anyways, I am trying to pass an argument that contains multiple ranges (much like you can do with the SUM() function):
=MultipleSUMIF("E11:E14, F11:F15", "A1, E1", G11:G14)
The first set of arguments is the ranges that I need to look through. The second set of arguments is the values that I need to search within the first two ranges. The third argument is the column that I need to perform a SUM function on.
Instead of doing this, how can I create a function that will allow me to say, "Add another criteria range/value" and it will add another criteria to the list. I am currently passing a string, and that is not ideal, obviously.
I have a spreadsheet using Data Validation to offer a list of text values for cells in the range E6 - E100. I have a worksheet change funtion to change the colour of the entire row based on the text chosen from the list.
What I would like to add is an input box that will appear when the value in the cell = "COMPLETE" asking for a completion date and adding the inputted date to the cell in column I in the same row.
Existing Worksheet Change Code;
Private Sub Worksheet_Change(ByVal Target As Range)
'Colour code rows based on order status
Dim rng As Range, i As Long
Dim cell As Range, Answers As Variant
Dim Colors As Variant
Colors = Array(24, 15, 38, 44, 42, 20, 36)
Answers = Array("CLOSED", "SUSPENDED", _
"COMPLETE - Awaiting Inspection", "COMPLETE", "WORKING", _
"SCHEDULED", "READY")
Set rng = Range("E6:E100")
rng.EntireRow.Interior.ColorIndex = xlNone
For Each cell In rng
For i = LBound(Answers) To UBound(Answers)
If LCase(cell) = LCase(Answers(i)) Then
cell.EntireRow.Interior.ColorIndex = Colors(i)
Exit For
End If
Next i
Next cell
End Sub
I need to create a formula that counts the number of times that an age range appears within a column. In column G, there is a list of ages based on a demographic collection. The ages range from 13 to 50+. I want to designate another cell to count the number of times the characters between 13 and 18 occur within that column. I have =COUNTIF(G8:G20,"13") How do I add "14", "15", "16", "17", and "18"?
View 2 Replies View RelatedI have this formula
= COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
that returns the number 2 (which is correct). However, if I precede it with
AZ6/COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
it returns a DIV/0 error, even though AZ6 has a value of 24.
Surely 24/2 would return a value of 12? NB AZ6 cell value is derived from the result of a formula.
When using watch window to watch a formula that has multiple formula's in it, is there a way to see the result of 1 formula within the big formula?
E.g. say you have:
= SUMIF(A1:A11,"207",B1:B11)/COUNTIF(A1:A11,"207")
And you put a watch on that, but in watch window it shows the result of the whole formula, say if you want to watch only the SUMIF part?
Im using Excel 2003 by the way.
I am currently having trouble with what I thought was a simple IF statement. As you will see from the formula I want to complete a statement for every month of the year but Excel will not let me go past July. Is there a limit to the number of arguments in an IF statement and how do I overcome this? =IF($A$3="Jan'08", SUM(C7),IF($A$3="Feb'08",SUM(C7:D7),IF($A$3="Mar'08",SUM(C7:E7),IF($A$3="Apr'08",SUM(C7:F7),IF($A$3="May'08",SUM(C7:G7),IF($A$3="Jun'08",SUM(C7:H7),IF($A$3="Jul'08",SUM(C7:I7),"n/a")))))))
View 5 Replies View RelatedI am having trouble evaluating two conditions with nested logical operators to produce the output I need.
For example Condition 1 has 5 choices (A,B,C,D,E) and Condition 2 has 3 choices (a,b,c).
Breaking it down,
[Condition 1] option "A" always applies and should give "Yes" (No matter [condition 2], "A" always gives "Yes")
[Condition 2] option "c" always applies and should give "Yes" (No matter [condition 1], "c" always gives "Yes")
[Condition 1] option "D" never applies and should give "No" (No matter [condition 2], "D" always gives "No")
[Condition 1] options "C" and "B" only apply if [condition 2] is "b" (if so, the answer is "Yes")
What I need is the equivalent of:
if ((([condition 1] == A) || ([Condition 2] == c)) || (([condition 1] == B || C) && ([condition 2] == b)), "Yes", "No")
