Functions To Be Used By Multiple Macros
Jul 9, 2009If I want to create a function or sub that can be used by any userform or macro that I create for a workbook:
Where would I define that function? Within the Module?
Do I define it as Public?
ADVERTISEMENT
Worksheet Functions In Macros
Aug 2, 2009I've been reading about usage of worksheet functions in macros, and I guess I'm still not getting it. What I want to do, is use Countif and Indirect worksheet functions in a macro but it always fails. Here is my formula
IF(Worksheetfunction.Countif(Worksheetfunction.INDIRECT("[DaysWorking.xls]'Collect No Stats'!$A:$A"),'2009'!Range("D" & x))>0)
Basically, I want to see if 2 different cells in 2 different workbooks match and then I would use the information to write different info in another cell. X is just a variable in a DO WHILE LOOP. Can these functions be used in a macro? Is there an alternative?
How To Return Multiple Values In Multiple Cells If Argument Is TRUE In IF Functions
Jan 8, 2013I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
Multiple Functions
Jan 25, 2009For the odds range, i have already two cells(the upper(F9) and the lower(E9)) and i have a cell named the current odd(G9). What are the formula together for the attribut cell(H9) for the following data:
1.0 : The current price is outside and below the odds range spread. For example, if the range is between 2,00 and 2,20, the range’s attribute will be 1.0 if the current price is below 2,00
NOTE: Obviously the formula for this one is =IF(G9
1.1 : The current price is on the bottom edge of the “odds
range” figure. For example, if the range is between 2,00
and 2,20, the range’s attribute will be 1.1 if the current
price is 2,00
NOTE: The formula for this one would be =IF(G9=E9,1.1)
1.2 : The current price is inside the “odds range” spread
and is placed one or two clicks from the bottom edge. For
example if the range is between 2,00 and 2,20, the range’s
attribute will be 1.2 if the current price is 2,02 or 2,04
NOTE: I have a hard time creating a formula with this one.
2.0 : The current price is outside and above the “odds
range” spread. For example, if the range is between 2,00
and 2,20, the range’s attribute will be 2.0 if the current
price is above 2,20
NOTE: The formula would be =IF(G9>F9,2.0)
Lost On Multiple IF Functions?
Feb 27, 2014I'm essentially trying to place a column that is largely based on another....a function that will calculate the following information
Carriers with 1 Vehicle - 25.00
Carriers with 2-4 Vehicles - 100.00
Carriers with 5-9 Vehicles - 200.00
Carriers with 10-24 vehicles - 400.00
Carriers with 25-49 vehicles - 750.00
Carriers with 50+ vehicles - 1500.00
In other words.
One column in my spreadsheet has number of vehicles. I want another column that will provide the according application fee as found in the information above.
Multiple IF & COUNTA Functions
Sep 25, 2008I've tried many variations but I can't seem to find a solution - I hope you can help. I'd like a formula that will ideally achieve the following:
IF B5:F5 all contain the letter y then return "Pass"
IF B5:F5 AND G5:K5 all contain the letter y then return "Merit"
IF B5:F5 AND G5:K5 AND L5:K5 all contain the letter y then return "Distinction"
IF B5:F5 is blank return blank
IF there are Y's in B5:F5 and the total < 5 return "Fail"
I did a sample sheet to show the desired output but don't know if this forum supports attachments.
Multiple Criteria Lookup Functions?
Aug 6, 2014I've attached a sample of the data I'm using.
I have two spreadsheets (the samples for which I have shown side by side in Sheet 1 of the attached file).
Spreadsheet 1 is about 30,000 rows and too large for me to change the formatting and structure.
Spreadsheet 2 is the output I need and the format is required by other stakeholders.
In spreadsheet 1 I want to sum quantity in stock for Type 1, Type 2 and Type 3 for each product and allocate it to spreadsheet 2 according to the month in which the product expires. For example, there will be a total of 92 units of product 413302 which will expire in Nov, 2014. Therefore I want 92 to be placed in cell N6 of Spreadsheet 2.
Unfortunately the product number is not unique - there are multiple sub products in spreadsheet 1 but they all have the same quantities of stock. The sub products are referenced in other parts of the report so I can't consolidate by Product Number. This also prevents me from using the SUMIFS function as it will duplicate the number found in the sub products.
What I need, perhaps in a combination of functions, is to find the first instance of product 413302 in Spreadsheet 1 that is expiring in Nov 14, sum the product types and give the result in cell N6 of Spreadsheet 2.
Set A Range For Multiple Functions/Editing Help
Jul 31, 2009Is there a way to SET a RANGE that can be used for further editing without the need to specify the range each time for each function to be perfomed?
I have a pile of Data, with a Calendar date and 4 columns of data for each date.
I want to make a summary for each year separately of one column of data (Total PL). How can I set a condtion that it will output a summary of data for a given year, e.g. 1990?
Even more useful might be setting up a table for each year, where I will be able to perform easy function like SUM, MAX, MIN but it will use data only from the specific Year in each row.
- Is there a way to make it simpler, but not having to specify the RANGE for each Year for each Function?
Correct Approach? (Multiple MID Functions)
May 29, 2007* I have a complex Excel workbook with several worksheets.
* The first worksheet is for raw data, which consists of a single string of data, separated by spaces, to be uploaded to a mainframe. There is no consistent pattern of length of data or strings in between pieces of data, which can vary widely. An example of the data would be something like this:
XXXXX YYYYY NN XXXXXXX
* For testing purposes, I need to come up with a way to parse the data for easier viewing. The current approach is this:
* Take the string and divide it up into individual cells by using the MID function. In the above approach, this would split the data into four (4) different cells.
This is going to be a very complex workbook with data strings that can have 20+ elements in them, and have lots of separate records, etc. While this way should work (if everything is entered perfectly and no data structures ever change, etc.),
Using Multiple IF Functions (value To Be A Positive Number)
May 9, 2009I am trying to somehow use multiple IF functions. I was able to use one IF function to disply '--' in a cell if a particular formula = 0. However I ran into a problem when negative values were displayed. I wanted the value to be a positive number. I thought I could use another IF function to multiply the formulas contents by -1 if it were <0, but I keep getting a #VALUE error in my cells. Is there a way I can have multiple conditions?
View 2 Replies View RelatedCustom Functions Multiple SUMIF
Dec 5, 2008I am trying to create a custom function to act much like the database capabilities of excel in summing a column based upon multiple criteria of other columns. First, before I get too far, does anyone have an already built custom VBA function that will accomplish this? I find that using the built-in database functionality in excel is VERY slow!
Anyways, I am trying to pass an argument that contains multiple ranges (much like you can do with the SUM() function):
=MultipleSUMIF("E11:E14, F11:F15", "A1, E1", G11:G14)
The first set of arguments is the ranges that I need to look through. The second set of arguments is the values that I need to search within the first two ranges. The third argument is the column that I need to perform a SUM function on.
Instead of doing this, how can I create a function that will allow me to say, "Add another criteria range/value" and it will add another criteria to the list. I am currently passing a string, and that is not ideal, obviously.
Multiple Worksheet Change Functions
Jun 23, 2009I have a spreadsheet using Data Validation to offer a list of text values for cells in the range E6 - E100. I have a worksheet change funtion to change the colour of the entire row based on the text chosen from the list.
What I would like to add is an input box that will appear when the value in the cell = "COMPLETE" asking for a completion date and adding the inputted date to the cell in column I in the same row.
Existing Worksheet Change Code;
Private Sub Worksheet_Change(ByVal Target As Range)
'Colour code rows based on order status
Dim rng As Range, i As Long
Dim cell As Range, Answers As Variant
Dim Colors As Variant
Colors = Array(24, 15, 38, 44, 42, 20, 36)
Answers = Array("CLOSED", "SUSPENDED", _
"COMPLETE - Awaiting Inspection", "COMPLETE", "WORKING", _
"SCHEDULED", "READY")
Set rng = Range("E6:E100")
rng.EntireRow.Interior.ColorIndex = xlNone
For Each cell In rng
For i = LBound(Answers) To UBound(Answers)
If LCase(cell) = LCase(Answers(i)) Then
cell.EntireRow.Interior.ColorIndex = Colors(i)
Exit For
End If
Next i
Next cell
End Sub
Multiple Criteria For Countif Functions
Nov 11, 2006I need to create a formula that counts the number of times that an age range appears within a column. In column G, there is a list of ages based on a demographic collection. The ages range from 13 to 50+. I want to designate another cell to count the number of times the characters between 13 and 18 occur within that column. I have =COUNTIF(G8:G20,"13") How do I add "14", "15", "16", "17", and "18"?
View 2 Replies View Related#DIV/0! Dividing Multiple Countif Functions Into Value
Jul 19, 2007I have this formula
= COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
that returns the number 2 (which is correct). However, if I precede it with
AZ6/COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
it returns a DIV/0 error, even though AZ6 has a value of 24.
Surely 24/2 would return a value of 12? NB AZ6 cell value is derived from the result of a formula.
Replace Multiple If Functions With Lookup
Oct 16, 2007I have multiple IF functions in a formula and found out that the maximum allowed is 7 and should use Lookup instead. The formula is to calculate the Present Value of an amount with the corresponding interest rates and number of days left.
View 3 Replies View RelatedEvaluate Multiple Functions In The 1 Cell
Oct 26, 2007When using watch window to watch a formula that has multiple formula's in it, is there a way to see the result of 1 formula within the big formula?
E.g. say you have:
= SUMIF(A1:A11,"207",B1:B11)/COUNTIF(A1:A11,"207")
And you put a watch on that, but in watch window it shows the result of the whole formula, say if you want to watch only the SUMIF part?
Im using Excel 2003 by the way.
Multiple Nested IF & SUM Functions/Formulas
May 23, 2008I am currently having trouble with what I thought was a simple IF statement. As you will see from the formula I want to complete a statement for every month of the year but Excel will not let me go past July. Is there a limit to the number of arguments in an IF statement and how do I overcome this? =IF($A$3="Jan'08", SUM(C7),IF($A$3="Feb'08",SUM(C7:D7),IF($A$3="Mar'08",SUM(C7:E7),IF($A$3="Apr'08",SUM(C7:F7),IF($A$3="May'08",SUM(C7:G7),IF($A$3="Jun'08",SUM(C7:H7),IF($A$3="Jul'08",SUM(C7:I7),"n/a")))))))
View 5 Replies View RelatedMultiple Condition Nested Logical Functions
Feb 17, 2014I am having trouble evaluating two conditions with nested logical operators to produce the output I need.
For example Condition 1 has 5 choices (A,B,C,D,E) and Condition 2 has 3 choices (a,b,c).
Breaking it down,
[Condition 1] option "A" always applies and should give "Yes" (No matter [condition 2], "A" always gives "Yes")
[Condition 2] option "c" always applies and should give "Yes" (No matter [condition 1], "c" always gives "Yes")
[Condition 1] option "D" never applies and should give "No" (No matter [condition 2], "D" always gives "No")
[Condition 1] options "C" and "B" only apply if [condition 2] is "b" (if so, the answer is "Yes")
What I need is the equivalent of:
if ((([condition 1] == A) || ([Condition 2] == c)) || (([condition 1] == B || C) && ([condition 2] == b)), "Yes", "No")
Nesting OR & AND Functions To Meet Multiple Criteria
Jan 1, 1970I want to put a formula in a spread sheet that if block f5 is equal to or higher than 20% of block b4 then block d3 * .0 if less than then * by .0078
View 14 Replies View RelatedCreating Multiple Results From Volatile Functions
Aug 26, 2012I have a model that does a projection for 36 months ahead on a spreadsheet. The projection depends upon a randomising "volatile" function. When I press recalculation a new projection is generated. I want to capture the set of numbers that appears at month 36 through repeated recalculations written to a separate sheet. I want around 500 of these numbers.
I have no experience with macros so doing it with preset functions would be preferable. If it has to be a macro, the easier the better. If invoking the spreadsheet and outputting to a flat file is easiest that is fine too.
VBA Functions - Multiple Inputs And Keeping Track Of Them
Sep 17, 2013I have several formulas that I use over and over, so I'm creating VBA functions that I can call from a worksheet.
But...when I have multiple inputs going into a function, is there a way to remind the user which input comes next in the same way that Excel does with built-in functions?
For example, when you type in =PMT( Excel brings up the helper text so you know that the order of inputs is (rate, nper, pv, etc....
Is there a way to bring up that same helper text in my own function? So if I have up, down, right, left as inputs and give the spreadsheet to someone else, they can see it's up, down, right left and not right, left, up, down .
Spreadsheeet With Multiple Concatenate Functions Programe
May 14, 2008I think this is an easy one, but i can't figure it out. I have a spreadsheeet with multiple concatenate functions programed in. All of them work. If, however, i try to change the formula inside the concatenate function it freezes and will not calculate the new cell. I have the calculation tab set to automatic in the options tab...
View 9 Replies View RelatedCombine Or Nest Multiple Lookup Functions
Dec 16, 2006I've got an indexmatch that works great
=IF(ISERROR(INDEX(accountstaff,MATCH(B$20,INDEX(accountstaff,,1),0),MATCH($ A55,INDEX(accountstaff,1,),0))),0,INDEX(accountstaff,MATCH(B$20,INDEX(accou ntstaff,,1),0),MATCH($A55,INDEX(accountstaff,1,),0)))
But I need to incorporate IF statement based on varying levels of revenue and think VBA will be less cumbersome, but don't know how to combine else if and index match.
I am trying to accomplish this:
IF B$20 (which is a dollar amount is = X, then index, match....
IF B$20 is > Y but < Z, then index, match...
Insert Multiple Characters Into String With LEFT RIGHT Functions?
Apr 29, 2014I've got a long list of account numbers of varying length and ultimately need to add a dash and a dot into these numbers. Here's an example
12345678 to> 1-2345.678
123456789 to> 12-3456.789
1234567890 to> 123-4567.890
The standard format is always 3 numbers after the . and 4 numbers between the - and .
I can get to this by doing a series of functions starting with this:
=LEFT(A1,LEN(A1)-3)&"."&RIGHT(A1,3) to get 12345.678 or 123456.789
copy/pasting that value into another field and then doing this
=LEFT(E1,LEN(E1)-8)&"-"&RIGHT(E1,8) to get the results above
I can't quite figure out the format to combine the multiple steps/functions into one so that I'm not copy/pasting values and re-doing the function.
Unable To Apply Multiple Logical Conditions Using If / AND OR Functions
Feb 19, 2014I have to decide if the final answer will be yes or no based on a combination of 4-5 cell values from a single row.
I have attached the details in the excel sheet.
Multiple Macros
Sep 4, 2009I have always saved each macro on a single workbook, saved the workbook using the macro name, so I can go use that spreadsheet for a specific issue. Now, however, my job role is changing to where I have to do a lot of things like get a file from Bob . . . slice and dice and then forward it on to Carol, etc. Then I have to save spreadsheet A to this directory, spreadsheet B to that directory . . . .
I am sure there is, I just can't get my head around it to have one spreadsheet that has ALL my macros that would be available to me on other spreadsheets? I tried using "show macros in all open workbooks"
Excel 2011 :: Can't Get Index Match Max Functions To Work Sampling Data From Multiple Columns
Jan 29, 2014I have 3 calculations I would like to make based on data in the spread sheet and I can't seem to get them to work with data from the two separate columns.
I tried a few of the index match max formulas I found here and could only get them to work with one column of data.
I have the spread sheet attached and the 3 calks I want to do are blank on the bottom.
I am using Excel 2011 for Mac
Macros For Multiple Graphs
Mar 6, 2007I currently have a 70 page spreadsheet with similar data that needs representing in pie chart format. All the column headers are the same and I only need 2 columns (A and T).
There are however different numbers of rows. Is it possible to write a macro to detect the number of rows before it draws the relevant pie chart (I've managed the pie chart bit!!)
See attached example, same concept but cant post real data.
Combining Multiple Macros Into One?
Mar 12, 2014I have a userform that has the same type information on 3 different entities (name, address, phone, etc). The same research is required on each one i.e. you need to look up the zip code for each). Therefore I have a bank of buttons on each page of the multipage form. Each button does the same thing depending on which page you are on. The following is my code to copy some information and open another application depending on which page you are on and which type entity.
My question is how can I combine these into one so my module is not 3' long.
Use Sub Routine In Multiple Macros
Oct 9, 2007I have a macro that formats an imported report and I have inserted it's code into several other routines I have written.
Since there is always the possiblity of changes occurring, is there a way to refer to this macro in a second (or third or fourth) routine so that if a change has to be made to the original macro, I won't have to change it everywhere?