Replacing Cell References With IFBLANK
Apr 15, 2005
I have two worksheets, one contains lots of data and the other references this data to form a summary.
The problem is that having set up all this I have found that not all the references on the summary sheet will always reference a cell with data in it and so bring back a value of 0.
Since this summary sheet will be used to enter data into a database I would prefer a blank cell over a 0.
I know I can use an IF ISBLANK to do this, but dont fancy going through each cell and re-writing the formula, so- Does anyone know an easy way of changing all the cell references to include the IFISBLANK statement?
View 6 Replies
ADVERTISEMENT
Oct 29, 2009
I have 2 colums like this. And I want whenever there is a reference like this âë. "some word" in column 2, to have the macro look up some word entry in column 1, find the text in the same row in column 2 and replace the âë. "some word" reference with the text found in column 2. (See attached, sheet 1 as it is, sheet 2 as I want it to be).
Sheet 1
another wordâë. "some word"
awordìåôÜöñáóç
bwordâë. "aword"
some wordêÜðïéá ëÝîç
Sheet 2
another wordêÜðïéá ëÝîç
awordìåôÜöñáóç
bwordìåôÜöñáóç
some wordêÜðïéá ëÝîç
View 9 Replies
View Related
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
View Related
Jun 12, 2009
I want to be able to replace the bolded and underlined areas of this javascript i have pasted in a cell with the value located in another cell. This means that those numbers would be replaced by a similar thing located in another cell. how can this be done? The way I would think you would do this by defining that say =b8 (an example of where the data could be coming from is ann excel formula, but not sure how to do this ...
View 6 Replies
View Related
Jun 4, 2014
Have a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
View 14 Replies
View Related
Jun 6, 2014
I created a custom ribbon with tickmark button. The problem is that at sometimes, i will need 2 tickmarks in the same cell.
Actually in using the simple line :
ActiveCell.Value = "a"
And when i click on a second tickmark, it replace my "a" by ei. "b"...how to make it "ab" instead ?
View 1 Replies
View Related
Sep 8, 2008
OS=XP Pro
XL=2003 SP3
I need to move data within a cell. Is there a formula that can accomplish this? Here is an example of what I'm trying to do..
Column A
/ TN14YP244f
/ TN15YP245j
/ TN16YP246h
What it would need to do is take the last character in each cell and move it to replace the P in that cell. It should also capitalize the letter. ie: / TN14YP244f would become / TN14YF244
The letters at the end of the cell are always different, however the letter they replace is always the same (P).
View 9 Replies
View Related
Apr 17, 2009
I have a long spreadsheet that is formatted and organized with six digit codes on the left, and then several lines of information on the right, in order to sort and compare to another report, I was trying to replace the blanks in the digits on the left....
View 7 Replies
View Related
Jun 8, 2009
I have a spreadsheet with around 1000 rows on data. in each row of data there is a number e.g. 2673 (all in their own cells) so in column A you would have a list of just numbers in another workbook, the number thats in each row corresponds to another value e.g. 2673 = CE103. So this workbook has 2 columns. In column "A" you have the numbers(2673) and in column "B" you have what that number matches with (CE103) i need a way of replacing all the numbers with what they equal
Workbook 1
A B C
2673 XXX XXX
513 XXX XXX
5107 XXX XXX
604 XXX XXX
Workbook 2
A B
2673 CE107
513 CDR57
5107 QV906
604 MNT57
There is an example of what i have (hope its understandable) and what i need is, the data from workbook 2 put in to workbook 1. So instead of having 2673 in workbook1, i would have CE107. And the same for the others e.g 513 would be CDR57.
View 4 Replies
View Related
Jan 24, 2010
1) What function can I use to replace a specific cell in spreadsheet 2 with what I type in a specific cell in spreadsheet 1 (e.g. type red in spreadsheet 1 in A1 and it will replace a blank cell A1 in spreadsheet 2 with red)? I have around a hundred spreadsheets which I need to name by typing a name in cell A1. Rather than doing this, I already have the names of the spreadsheets in a column.
2) Is there anyway to control the attributes of cells in another spreadsheet? E.g. change to bold, red and specific size font in cell A1 in spreadsheet 2 using cell A1 in spreadsheet 1.
View 2 Replies
View Related
Aug 6, 2014
I have a row of different dates in a speadsheet all in the same column e.g A1 to A10 What I am trying to achieve is that when it reaches todays date it will automatically change that cell to read Expired.
View 1 Replies
View Related
Nov 8, 2012
I have a data starting from column D. And the list goes like below:
D1: TO
E1: CC
F1: BCC
G1: Body
H1: Text1
I1: Text2
J1: Text3
I would like to obtain the final body in column K after replacing the text with column H, I, J.
Below is how my data looks and How i would like to obtain the final body.
To
CC
BCC
Body
Text1
Text2
Text3
Final Body
View 1 Replies
View Related
Jul 14, 2009
I have code that was working with cell references. I replaced one of the cell references with a Defined Name that I applied to the cell that was previously referenced in the code. The code does not work with the Defined Name now. In the code below, the Name "FeeType" was previously where the cell reference was. I have attempted to fix the reference by changing the use of " 's ....
View 9 Replies
View Related
Dec 30, 2009
Right click menus are a well known topic but I am struggling to find information on what I want to do with them. I have seen it done so I know its possible. What I want to do is completely replace the right click menu with my own custom one on a worksheet.
I do NOT want to add things to the existing right click menu I want to effectivly disable the existing one and put on my very own one in its place. I have looked at the code for adding a menu to a textbox etc which seems sound but I can't trigger it with an event. I don't have any code to show Im afraid as I am just playing with other people at the moment trying to get it to work.
View 9 Replies
View Related
Jul 2, 2006
I need some direction on how to proceed with dismantling an address cell. I have a workbook that one field is an address label field. What I mean is the entire address is entered in one field just as it would appear on an envelope. I need some suggestions on how to break this apart and create individual fields for the individual parts.
View 6 Replies
View Related
Jun 1, 2014
I'm running Excel 2010.
In a field containing this: Bergamot, Orange*(11,16) I want to put a space before the asterisk. There are hundreds of these in the spreadsheet with other text before and after the text to be replaced. I made sure the field is defined as a text field.
I searched on "*(" and said replaced with " *(" and ended up with " *(11,16)" - the Bergamot, Orange was removed from the field.
View 6 Replies
View Related
Feb 24, 2014
My current problem is that I need to search two tabs of data and use the results to modify the contents of one cell in the first tab.
I'll try to be as clear as possible:
tab1 has relevant cells "a" and "b", same row
tab2 has 3 relevant cells "c", "d", and "e", all on the same row
All cells are text values - some digits, but should be treated as a regular String.
The search needs to look at cells "a" and "b", find their match in "c" and "d", then replace the original value of "b" with the value in "e" after a match has been found.
View 1 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Mar 2, 2009
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
View 9 Replies
View Related
Oct 2, 2009
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
View 2 Replies
View Related
Apr 29, 2014
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
View 2 Replies
View Related
Jun 15, 2014
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
View 2 Replies
View Related
Mar 2, 2009
I'm using Excel 2003 and I'm trying to make my LINEST function and the source cells for a scatter graph use the cell range specified in another cell in the document. I figured out that it was simple to do the following:
I250 contains: 10, shows: 10
I251 contains: ="I"&I250, shows I10
But I can't figure out how to do this in a larger function. I've tried a few things but none of them work. Here is an example where I want it to do a LINEST with y values in cells Ja - Jb and x values in cells Ia - Ib (where a and b are integers specified in cells I250 and J250 respectively):
View 9 Replies
View Related
Mar 25, 2013
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....
View 1 Replies
View Related
Oct 9, 2008
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
View 4 Replies
View Related
Sep 17, 2009
I'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".
When trying the following, I get an error permission denied.
View 14 Replies
View Related
Jun 12, 2006
I'm using Excel 2000 and trying to use the datedif function. I've formated 2
columns as date m/dd/yyyy and left the formula column general I'm entering
dates
A1: 1/1/2002
B1: 1/1/2005
I'm entering the formula in C1
=datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I get #NUM! for a result.
View 11 Replies
View Related
Aug 4, 2009
My macro uses the solver 100 times. Everything is working well, but it's a little bit slow because of all the cell references.
I was wondering if it's possible to use the solver with variables without cell references?
View 4 Replies
View Related
Oct 14, 2008
I'm looking to do something similar to a Paste Special -> Transpose, but rather than pasting values or formulas, I want to paste cell references to the cells that I just transposed.
E.G.
Sheet 1:
A1 = 1
A2 = 3
B1 = 2
B2 = 4
Sheet2:
A1 = Sheet1!A1
A2 = Sheet1!B1
B1 = Sheet1!A2
B2 = Sheet1!B2
This would typically be an easy exercise, but I have a set 205 rows long and 12 columns wide. A little long to do it one by one.
View 9 Replies
View Related
