I have a piece of code which under specific condition will output an error message box. The code is as follows:
If BuyQuote > 100 Or BuyQuote < 0 Then
MsgBox ("Incorrect Buy Quote Value - Must Be < 100 and > 0")
End If
How can I make it so that if this message box appears, the VBA programming will start from the beginning of the code again instead of continuing??
I have a macro that loops from column A to column IV(the last column in
Excel). Once the last column is read how can I cause my macro to restart at
the column A again? Can I set my macro to return to column A after it reads
column IV. What would be the macro syntax for that?
My color palette is having a problem for each colored font in red i have is turning to grey after restarting excel , despite the fact that i am changing from tools>options>color>clicking on the grey and modifying to red and the clicking apply , eventhough when i restart excel it turns to grey again !Also the dark blue is turning to grey and vice versa.
View 12 Replies View Relatedi need a vba code that a given time will open a message box saying go for a tea break
View 7 Replies View RelatedCould I get the code for creating a message pop up in case a particular character is typed in a cell. eg Typing in "3" should throw a pop up msg saying "Not allowed"
View 9 Replies View RelatedI would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
I need a message box with information before the code run. Yes - code run, No - exit code.
View 9 Replies View RelatedDoes anyone know the code I would use to input a message box into a spreadsheet that says "Do NOT click on this cell" when a user clicks on cell C5? I only want this message to come up if the user click on cell C5.
View 9 Replies View RelatedI have a worksheet like the following:
A B C D 1 DATE EMP NAME EMP CODE SHOE 2 01/01/09 20029 1 3 01/01/09 30463 1 4 04/01/09 10103 5 12/01/09 10036 1 6 12/01/09 10166 1 7 12/01/09 30465 1
Now what I want is that an employee shall not be entitled to take more than one shoe in next one year from the date of last issue. In that case if again the person claims, a message will appear " Not Entitled."
My date format is dd-mm-yy.
I would like to include a message within this VBA code, not sure of the code to use.
ActiveSheet.SendMail recipients:="dan@aol.com", _
subject:="Your inputs are due", _
returnreceipt:=True
End If
I have 4 columns in a worksheet.
A B C D
number type date name
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
This seems easy in theory but it's above my head. I have written code to add text and numbers from a userform to certain cells on a worksheet. Now, is it possible to display a message box after the code executes to acknowledge the code has executed successfully? I have tried simply adding the Msgbox function at the end of the code but that does not work.
View 2 Replies View RelatedI have this VBA code running in cell A1 which gives you a yes/no message box when you try to change the selected cell. I am trying to have the Target.Address = 'Specific Header Cell in Table' but I am not able to develop the code to do so. Here is the code:
[Code] .....
The main reason I have this message box is to prevent the user from changing the cell in the table because the titles in the tables are linked to macros. If they are changed, the macros will not run. Also, I am aware there are codenames for the excel sheets in a workbook. If there are codenames for the header titles in an excel table, I could link my macros to the codenames. As a result, I would not need this macro for the message box.
I have a worksheet with several columns (30+). One of these columns is "Date Opened". This "date opened" column can have dates as early as 01/01/89 and as recent as today.
Can a macro be made that does this
1. Data/Sorts the whole worksheet by the "Date opened" column
2. Brings up a message box in xx/xx/xxxx where format saying "Please enter the earliest date opened you would like to use, all other rows will be deleted"
3. Do just that, delete all rows that have a date earlier than the date entered in the message box.
So if the date of 01/01/2009 were entered into the message box, the macro would delete all dates in the "Date Opened" column that were older than that date.
And then, continue on with the rest of the sub, if neccessary.
I just want to see if this is possible, here is the code but what I want is a message box that display how long cetain code has taken to run.
I have most of what I need I just need to figure out how to take one varaible away from another to give the run time... but no idea where to start with it.
Private Type SYSTEMTIME
wYear As Integer
wMonth As Integer
wDayOfWeek As Integer
wDay As Integer
wHour As Integer
wMinute As Integer
wSecond As Integer
wMilliseconds As Integer
End Type
Private Declare Sub GetSystemTime Lib "kernel32" (lpSystemTime As SYSTEMTIME)
Public Function TimeToMillisecond() As String.........
I have a dropdown list in my spreadsheet, on the list is Compound, Pay by Check, Internal Transfer, and ACH. I would like a message box to pop up with a message when anything except Compound is selected. The cell is d38.
View 9 Replies View RelatedI have code to open another workbook and run a specific macro. I plan to then take that and copy it over to my workbook.
The problem I am encountering is when I run this macro, at the end of the code, a form/msg pops up stating it is complete. This then automatically stops my code from running (from my original workbook). How do I close this form in order to keep my code running?
I need a macro to provide a message box with yes and no buttons - how do I get the macro to act in accordance with the button pressed by user?
View 2 Replies View RelatedI have a spreadsheet with a number of fields on it which must be filled in before the file can be saved, and if the user attempts to close the spreadsheet without filling in the required fields, I want a message box to appear asking for confirmation that the user wishes to quit, if yes, the sheet exits, if no, the sheet remains open
View 2 Replies View RelatedI have a spreadsheet set up to automate calculations and control data input for in process quality control checks. The spreadsheet is basically a series of input boxes requesting information from the user. To control the input of part numbers I have some code for a userform which populates listbox within the userform from another closed spreadsheet (opens & closes without updating screen) & enters the selected data from the listbox into a selected cell in the spreadsheet
all the input boxes and calculations are working well, the userform works well, BUT when I include the userform within the code I get the following problem, an error saying that I am trying to change data in a protected cell where data has been entered and then protected by the VB code, even though the code is not trying to change the cell.
I have tried just loading and unloading the userform and everything works well, it only fails when I actually use the userform, and then close it. from this I am fairly sure the problem lies within the form so I have been through the form code line by line and deleted anything that is not vital and the problem persists. Here is the form
Private Sub CommandButton1_Click()
Dim Msg, Style, Title, Help, Ctxt, Response, MyString
Dim Part As String
Part = ActiveSheet.Range("B1")
Msg = "Are you sure you want Part No" & vbNewLine & Part ' Define message.
Style = vbYesNo + vbDefaultButton2 ' Define buttons.
Title = "SELECT PART No." ' Define title.
Response = MsgBox(Msg, Style, Title)
If Response = vbYes Then ' User chose Yes.
Set_Data_1 ' Perform some action.................
code that will be able to lookup a cell in Column J of Sheet1 by using a lookup value on Sheet2. The lookup value can be any cell in columns B, D, F, H, J, K, or N on Sheet2. The tricky part is, I want the result of this lookup (the result comes from Column H of Sheet1) to be placed as a data validation input message for the cell directly to the right of the lookup value when this cell is clicked.
For Example: Lookup Value is "416991" which lies in cell N8 on Sheet2. Look it up in Column J of Sheet1 and return the appropriate value "X" from Column H of Sheet1. "X" will then appear as an input message when cell O8 of Sheet2 is clicked.
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
How do you add icons into a message box. ie a warning triangle etc.
View 3 Replies View RelatedI use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies View RelatedI've developed a little software using Excel Macros & VB. To prevent people from accesing the code I protected the code blocking it from visualization. It seems not enough as an acquaintance of a friend cracked it in 25 minutes. Or so he says. So I'd like to know if there is a better way to protect the font code.
View 8 Replies View RelatedI have an excel file having part code,name,vendor and Qty ( Quantity ).
My problem is that I want to apply an excel formula to pick up that vendor code who have highest Qty of a part code.The condition is that S.No.should not be disturbed.This file is so large,but here I have taken an example,
So i would like a message box to appear upon opening that asks the user "Are you sure this is the most recent copy of this workbook?"
Click Yes would simply close the message box and allow user to continue
Click No would close the workbook immediately without saving and also without prompting to save ( i have =TODAY() function within the workbook so the workbook will instantly be different from the current saved file and will for sure prompt the 'Exit without saving' warning box
Office 365 is my setup if that makes a difference.
I need to trigger a message box if 2 conditions are met: A1>1 and A2>1 Message "Limit Exceeded".
On searching I've found some code but can't get it to work;
Option Explicit ....
I have the following spreadsheet
Column A-------------Column B------------Column C
Invoice No.-----------Part Number---------Classification
8200001733----------LX+150SV-----------9010.90.9000
---------------------SE+68763001--------8501.31.4000
---------------------GJ+1000-------------8528.30.8040
---------------------LX+150SV-----------9010.90.9000
---------------------GJ+1055-------------9013.30.2020
---------------------SE+2222-------------" "
---------------------GJ+67210------------8419.39.3311
---------------------GJ+100217-----------" "
What I need is two sets of VBA Code and 2 message boxes for the above scenario:
If Range C3:Last row contains a blank cell then Message Box ("WARNING: All items are not classified" refer too C6 and C8)
If Range C3:Last row contains "8528" or "9013" then Message Box ("WARNING: There is an FDA/FCC requirements for this file refer to C4 and C5 - create an Attachment from the scan folder and save as Attachment3-FDAFCC documents).
Is it, by any means, I can display the value of a cell adjacent to a match in a column range in a message box ?
I am searching for the answer to this question past 1 hour on the internet !