Run Message Box When Header In Table Is Changed (VBA Code)
Aug 18, 2014
I have this VBA code running in cell A1 which gives you a yes/no message box when you try to change the selected cell. I am trying to have the Target.Address = 'Specific Header Cell in Table' but I am not able to develop the code to do so. Here is the code:
[Code] .....
The main reason I have this message box is to prevent the user from changing the cell in the table because the titles in the tables are linked to macros. If they are changed, the macros will not run. Also, I am aware there are codenames for the excel sheets in a workbook. If there are codenames for the header titles in an excel table, I could link my macros to the codenames. As a result, I would not need this macro for the message box.
View 2 Replies
ADVERTISEMENT
Nov 2, 2012
What i am trying to do:
1) check whether any value in column J, rows 7-18 is changed,
2) check whether the value is above the value in col H, respective row multiplied by 1,25,
3) if point 3 true, clear the contents of cells E24, F24, and show up a messagebox,
4) run another macro by pressing button in cell C24 in order to fill the E24 and F24 cells again.
What happens: Points 1-3 work perfectly well, but then i have a problem in point 4 - the messagebox of point 3 appears again and the work of macro of point 4 interrupts showing an "Application-defined or object-defined error".
The file with the code is attached : Example.xlsm
View 3 Replies
View Related
May 16, 2006
In a range of cells (e.g. B26-B40) I have names (first name and second name or first initial and second name). This data is carried from sheet 1 to the second sheet via formula. Some cells may be blank as well.
A VB code to display a message when the user changes the name in any of these cells with data or adds a new name to a cell that is blank, in sheet2
View 3 Replies
View Related
Oct 2, 2008
I have created a userform with multi pages... One of the page is up and running ok.
However I have on one page entries like customer number, name, address, and so on.
I have the same userform from a book which I like to use in one of my pages.
Now what I have problems with is that I need one page to refer to another worksheet of the workbook.
Lets say first page to one worksheet the second page to another. And so on.
Here is the code from the book and it likes to refer to the same worksheet as the userform is opening up.
Private Sub frmDFG_Initialize()
'Startzeile für das Drehfeld festlegen
If .ActiveCell.Row < 3 Then
spn_Change = 3
Else
spn_Change = ActiveCell.Row
End If
End Sub
View 9 Replies
View Related
Oct 6, 2008
I want for my set of data. The attached .xls is pretty straight forward: the first column is a list of people (identified by their customer number) and the second column is the URL they visited.
Since many people went to multiple pages, there are dupes between the two columns, but all of the rows are unique. What i am looking for is a table that shows as a header the URL (just one) and then the list of people that went to that URL under the header. So it's really just one column of information. It seems like a perfect task for a pivot table.
View 2 Replies
View Related
Feb 21, 2009
I am wanting this work book to do is have a table of categories update automatically when a category is selected in the "category column". The 3rd cell to the left of the category column "Gross column" is where the data is which needs to be sent to the corresponding category in the table and utomatically update. I have attached a sample workbook.
View 4 Replies
View Related
Feb 26, 2014
I've managed to piece together a VBA code that works perfectly for my needs. The problem is that the sheet it is on gets adjusted a lot, and I only need the code to run when certain cells are changed (rather than each time any cell is changed).
Here is the code I have now:
[Code] .....
Put simply, I need this code to run only when a cell in Range "TValueDeal" is changed. Is making this adjustment as simple as adding a couple lines of code, or is there a better way to write the entire thing?
View 3 Replies
View Related
Aug 23, 2002
Is there a way to cause a particular VB function I write to execute any time a value in a particular range of cells is changed?
I thought I had it when I thought I could do a sum formula, range on the cells to be checked, then call the function as a side effect of this sum. It was then that I realized I didn't know how to call VB from within an Excel cell formula.
1. Is there a way to call VB (say, sheet1.myFunction())?
2. Is there a better way to do what I want than to try to hack a side effect into a formula in a cell that depends on a sum (which "watches" for the changes for me.)
The cells would have text in them, not numbers, so using the sum-based formula would be iffy at runtime to me at best. What I really want to do is run a function on the cell value as a string. There are a lot of such cells (thousands) so ideally I would only need one external cell to activate the function (which scans all the cells I am concerned with) rather than have to paste a custom, relative formula into thousands of cells manually to have each one watch one cell, if you know what I mean.
View 9 Replies
View Related
Jan 20, 2010
My problem this time is in regards to auto sorting a table as data is changed in another worksheet and is auto copied within the said table.
I.E. I need the Fax page (second last), the table has to auto sort based on column " C ". This is easily done using custom sort but can it be done automatically ? I want to lock the page so nobody modifies it.
I attached a copy of my work so far, using Excel 2007.
All the sheets are locked except " Player DATA " and " Fax ".
The password is " Moose ".
View 7 Replies
View Related
Feb 22, 2012
I have two data tables (12 columns each, 60 rows each) in the same worksheet. Ideally, I'd like to conditionally format the 1st table to show if any values changed from the 2nd table.
I see that I can conditionally format each cell to compare to its respective cell in the 2nd table, but would rather not do this 720 times.
View 2 Replies
View Related
May 3, 2007
Is it possible to always print out a specific pivot table even if changes/selection and range have changed? What I have right now is a button that prints out the pivot table (assuming the range is not changing). But if a user changes selection the button prints only a part of the pivot table.
View 3 Replies
View Related
Sep 12, 2007
I have a code that i want to run after an item in a page field on a Pivot table is changed. I have put the code in the PivotTableUpdate event. However I would like the code to run only if the user changes an item on a specific page field i have set up on the pivot table layout.
So, if I have 2 page fields on my pivot table pf1 and pf2 :If the user changes an item in pf1 the pivot table data changes but my code within the PivotTableUpdate event doesn't runIf the user changes an item in pf2 the pivot table data changes, my code detects this page field has changed, and my specific code runs.
View 3 Replies
View Related
Jan 21, 2014
I wrote the following basic code earlier (which will end up being part of a larger code)
Code:
Dim DateInput As String
Dim LastCell As String
Sub LastRowInputBox()
LastCell = InputBox("What is the last row number in the range?", "Last Row Input")
[Code] ......
As you can see, all the ColumnCopyInsert Subroutine does is copy select/copy four columns (E:H), inserts the copied selection immediately to the right, inserts formulas and autofills down to the last row required. I added the LastRowInputBox routine as the range of rows varies from week to week (inserting new rows, deleting others).
The code works great...up to a point unfortunately. If ran as it is, everything that should be copied/pasted will be and cells autofilled to the row specified via the InputBox. Here comes the problem, if any rows are either inserted or deleted then the code throws out "The object invoked has disconnected from its clients" when it reaches the first instance of the following line:
Code:
Selection.Insert Shift:=xlToRight
At which point, Excel hangs (or maybe in some sort of loop) and I have to open Device Manager and close the Excel exe process.
View 5 Replies
View Related
Apr 15, 2008
I used the code below for Conditional Formatting. This works fine but the VBA-code crashes when I delete more than one selected cell. Is there a simple modification possible to prevent this from happening?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:C250")) Is Nothing Then
Select Case Target
Case 1
icolor = 6
Case 2
icolor = 12
Case 3
icolor = 7
Case 4
icolor = 53
Case 5
icolor = 15
Case 6
icolor = 42
Case Else
'Whatever
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
View 3 Replies
View Related
Jun 10, 2009
I asked for a macro to delete the whole row if a duplicate customer number was found in column B. Sometimes, though, my column numbers change. So, logically thinking, I simply changed the criteria, but the macro ONLY seems to work if duplicate customer numbers are in column B only.
This code below won't work if the Customer Number is in column D instead of B even if the reference of B:B is changed to D:D, it doesn't carry the macro over.?
View 3 Replies
View Related
Apr 17, 2014
I need to format my data without changing my header or adding a header without Column1, Column2...
I need to do this through VBA for two tables in columns A through C and E through K.
formatting every rows DARK and LIGHT manually because the data order will be changed?
View 3 Replies
View Related
May 3, 2006
It is possible to make a table in the header in excel like word? If yes, how? I think my question can be answered her, but the links don't work anymore
http://ozgrid.com/forum/viewthread.php?tid=2952
http://ozgrid.com/forum/viewthread.php?tid=4391
View 2 Replies
View Related
Aug 1, 2012
I have the code below in a macro, but cannot figure out how to add the following format to the left and right header:
size 12 Ariel font, Bold and Italic
I cannot seem to get it right!
With ActiveSheet.PageSetup
.LeftMargin = Application.InchesToPoints(0.166)
.RightMargin = Application.InchesToPoints(0.166)
.TopMargin = Application.InchesToPoints(1)
.BottomMargin = Application.InchesToPoints(0.8)
.HeaderMargin = Application.InchesToPoints(0.5)
.FooterMargin = Application.InchesToPoints(0.3)
[code].....
View 9 Replies
View Related
Sep 29, 2013
Perhaps I missed something in the basics of Excel as to how a table's column header is formatted.Also, my date format is dd/mm/yyyy
When using a basic formula, such as below, in A1 and Cells A2 and B2 have the dates 1/01/2013 and 2/01/2013, this code works fine.
VB : =If(A2<=Today(),"Yes";"No")
BUT, when you convert those two dates to a table, the formula with post No.
However, if you make another formula as show below, the correct day will come up.
VB : =Text(A2,"dddd")
When auto filling the dates in the row, without a table, the dates increase per day.
When auto filling the dates in the row, with a table, the dates increase per year. (And yes, even when 3+ dates are inserted, highlighting those 3 and then autofill.)
Why does a column header change the format and to what format is it changed to?
Why do some formulas output accurate date based on the date in the column header and others do not?
Why do the dates increase per day without a table and per year with a table?
View 3 Replies
View Related
Jan 7, 2010
I have a excel worksheet which i am exporting into a word document through a macro labeled "Go". Basically it will query the excel sheet and the word document i have, will take the values and put them in the correct placing.
My problem is...
I know that excel will use the first row as the table headers, but what if i want it to start at like row c? and use that row as table headers. How would i go about doing that?
View 5 Replies
View Related
Nov 23, 2009
I am having trouble with getting a value (which is the row and column value) from a set of numbers. I have attached an example table to try and make things clearer.
What I have is a table with a set of Row Headers, and Columns Headers all numeric. e.g Columns headed 1, 2, 3, 4, Rows 30, 40, 50 etc. I want to find the 1st occurrence of a value e.g. 1.0 in the table (by 1st Up mean closest to top left), and then give me the value of the Row and Column Header that corresponds to that.
So for the example attached, I want to get the row Value 200 and Column 6 from finding the 1st occurrence of the number 1. I have tried various combinations of index and Match etc. But I can't get my head around the fact that the position of the 1st no. 1.0 can change, therefore I can't use any releative positions etc.
View 3 Replies
View Related
Jun 22, 2005
I am trying to link what is in the header and footer with information contained in certain Cells. (I eventually want to have a user form to help input the information, but one thing at a time.)
How do I go about getting the following information into code so that I can update the enclosed code?
Left Header: Client Name contained in Sheet: "Table of Contents" B:1
View 5 Replies
View Related
May 13, 2014
I have a list of S/N with Pass/Fail result next to it. A specific S/N can appear several times in the list:
SN...Result
-------------
111...FAIL
111...FAIL
111...FAIL
111...PASS
222...PASS
333...FAIL
333...FAIL
When creating a pivot table of SN vs. Result (count) I get:
****|FAIL...PASS
-------------------
111..|...3.....1
222..|..........1
333..|...2
I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
I get:
****|PASS
------------
111 | ...1
222 | ...1
Desired:
.......|..FAIL..PASS
-------------------
111 |...3...1
222 |........1
Desired (alternative):
......|..FAIL
-------------
111 |...3
222 |...0
View 1 Replies
View Related
May 19, 2014
I have a table which is extracted from a database using 2 tables.
1 Header and 1 details table.
I want to display the latest date in column E.
As Column A,B,C is the header table and column D,E is the details table.
Can this be done in vba or a pivot?
View 1 Replies
View Related
May 16, 2013
I'd like a formula that'll return the column header by matching a lookup value with a table in the second sheet.
eg: sheet 1
Name
Cell
Region
John
111-2222
[Code] .......
The formula should match the name in A2, John, with value from the table in sheet 2 and return the correct region, this case North.
View 1 Replies
View Related
Mar 5, 2014
I have a report that I want the total amount (in the bottom right corner, but can vary in row number) to appear in a particular cell in the header. In the macro, I selected the cell & entered "=CTRL+End". It works in reality, but not in a macro. It returns a visual of 0.00, but "=XFB1048565" in the formular bar. How can I get the header cell to return the correct total amount?
View 3 Replies
View Related
Aug 13, 2013
I have a table showing accesssibility of given fruits in some particular shops. What I need is to list the fruits available in every shop right after the shop's name, but skipping any empty spaces (i.e. unavailable fruits. See the example, it's manually entered though).
View 2 Replies
View Related
Oct 4, 2013
Excel 2003
I have a table with a header row of scores 1-10 in B4:K4.
In column A I have a list of locations A5:A68. People in each location were asked to score an event between 1 and 10. The count of their scores is under B4:K4, eg Location 1, 3 people scored 1 (entered in B5), none scored 2 (C5), 6 scored 3 (D5) etc through to the score for 10 in K5.
What I am after is the average for each location so that in L5 I can say 'for all the respondents for Location 1, the average was:...
This may be a bit more complicated than it appears as presumably there will be a requirement to multiply the number of respondents by their scores and then ... ?
View 9 Replies
View Related
Jul 24, 2014
I have data in excel sheet in the below format:
Existing view.png
How to write a VBA code or Macro to get it in below format:
Required View.png
Timestamp column is the unique key.
View 1 Replies
View Related
Nov 12, 2009
i need a vba code that a given time will open a message box saying go for a tea break
View 7 Replies
View Related
