Restrict Save Button
Dec 11, 2007
I have the following code behind a save button,
I need to modify it as it currently allows the user to save even if there is no values in D2 or D3. I need it to look at these cells first as well as A17-F25 and if there is no data in any of these cells it either brings up an error message saying you need to enter data in these cells to save!
Also, at present the user has to click on the default save button within excel to save changes made after the initial save, could this be added to the button I have created?
Here is my ...
View 9 Replies
ADVERTISEMENT
Jun 22, 2014
I have a UserForm in which i have inserted a CommandButton. I also have a Table on a Sheet in Excel that i would like to save as PDF.
When i click the CommandButton on the UserForm i would like the SaveAs screen to come up and have the Table (or Used Range in the Excel Sheet) as the selection to be Saved as .PDF format.
View 3 Replies
View Related
Mar 9, 2013
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies
View Related
Jan 26, 2007
I have a spreadsheet with 32 worksheet, I want to write a macro to "save the work, save as.. in a specific location and with a specific name and then reseting all data in specific cells.
View 14 Replies
View Related
Apr 5, 2007
I have a update/Save button on a spreadsheet. So when clicked it updates another sheet and saves the workbook.
how can i have it run the macro when they don't click the button and do
File -> Save.
View 9 Replies
View Related
Dec 16, 2008
Save with a button?. i currently use the following code to save my form...
View 4 Replies
View Related
Mar 31, 2009
Just playing around again, seen this file a person posted today and like it. I wounder if a Save As button can be made. This would just be a shortcut to save projects from a master form. Here is a example of my project.
View 5 Replies
View Related
Nov 12, 2008
I'd like to create a button within my excel datasheet that does a save as based on the name specified in a certain cell..
for cell a20 lets say has the file name (hello123456)
so i want to make a button within excel that when clicked will save the entire file as hello12346.xls on the desktop
is this possible?
View 3 Replies
View Related
Feb 17, 2009
I have created a toolbar button to save a file as a specific name based on a cell value. The macro runs fine, but the button changes priority when the new file is saved.
i.e. the original file is called "quoting_tool" and the newly created file is called "quoting_tool_'B3'". However, the next time I click this button in the original file, it requests the new file as the home of the toolbar button. I have tried saving the original file after adding the button, but that doesn't work.
View 2 Replies
View Related
Sep 3, 2013
I know how to add a save and close button but i do not know how to make it instantly available in every new workbook that i open. Currently i click the button and it looks for the macro in the first excel book that i created it in.
how do i make that macro become a default in every workbook?
View 1 Replies
View Related
Apr 9, 2014
My sheet has a calculator that outputs a value based on inputs. I also have a pick list on top labeled Q1-Q4. Depending on which value is selected on the picklist, the input values will output a different amount. I want to create a button which allows me to take this output and save it in another cell under a heading Q1, Q2 etc. depending on which Q was selected in the original picklist. In essence I want a button that records each output onto the same sheet by by quarter(Q).
View 9 Replies
View Related
May 23, 2014
Would I be able to save a Macro button in a CSV File since every time I open spreadsheet it disappears and my system only accepts CSV.
View 7 Replies
View Related
May 26, 2009
I have a sheet name "all" Sheet 15. What I want to do via VBA is sort range B4:I803 sort by Column G (ascending) then by Column H (ascending).
Have this sort activated by a command button or once the WB is saved then activate the sort prior to saving. The former is the preferred but if it's not to much trouble with coding then the former and latter solution would be great.
View 9 Replies
View Related
Jul 14, 2009
Not to sure if it can be done but i would like to have a button on my spread sheet that once pushed it automaticaly saves my worksheet as a PDF in a selected company folder in my documents.
I know if you go to file and save as PDF, then save in selected folder will work, just looking for a quicker way so my staff just needs to push one button on the worksheet and it does it all. (dummy proofing the form i guess)
View 9 Replies
View Related
Nov 14, 2009
I have a spreadsheet that has several formulas that update once all the values are inputted however I noticed that if I drag the formulas down the column, the cells does not update until I click the save button.
View 2 Replies
View Related
Apr 15, 2014
I have a button in a template file, that when clicked, saves the file as a new file with file name based on data in certain cells.
I want to disable the ability to save the file with the Save icon or Ctrl-S, but the button still needs to be able to save it (the button is technically doing a Save As, so no problem there). But, I, as the administrator of the template, need to somehow be able to save updates to the template file. Can this be accomplished by coding Save to work when used with a secret key combination that only I know (I can put it in password-protected VB code)?
Then, as if that's not tricky enough, the trickier part is that once the file is saved as the new file (no longer the template) - re-enable the Save button and Ctrl-S so the user can then save it as many times as they want.
View 3 Replies
View Related
Dec 17, 2012
Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
View 2 Replies
View Related
Apr 15, 2008
I have a fairly elaborate close-down routine for my workbook.
1) Quit out of fullscreen (restore initial state of excel before saving)
2) Hide all sheets but one (enforces cant do anything unless macros enabled)
3) Automatically save without a prompt
4) Close the workbook
I've researched it well and implemented it to the point where it works, but only if the user clicks the excel application close button -- the "X" in the titlebar (hence not in fullscreen).
However, if I launch the process via a userform button click, then for some reason the
DisplayFullscreen = False, Sheets hiding, and save codes have no effect (fullscreen persists, sheets are not hidden, no file is saved) in the Workbook_BeforeClose() subroutine....
I repeat: all the above works fine if process was launched by "native" excel button, but does not have any effect if launched from a userform commandbutton. (?!?!) any ideas what's going on?
I'm including my code so you can get an idea how it's structured.... by it's pretty "by the forum" as far as I can tell...
Private Sub CloseButton_Click()
If(1) Then
'Method 1 - close directly from userform command button
With ThisWorkbook
'.RunAutoMacros (xlAutoClose)
.Close
End With
Else
'Method 2 - set a timer to call a function to perform
' "ThisWorkbook.close" in a function outside of the userform
CustMenuCloseTimer = Now + TimeSerial(0, 0, 2)
Application .OnTime CustMenuCloseTimer, "CustMenu_CloseAction"
End If
End Sub
View 3 Replies
View Related
Oct 24, 2009
1) We need the Input screen to auto clear the fields once the " Save " button has been pressed and data transfered to the appropriate tracking sheet
2) We want to ensure that if any of the Red cells are empty the " Save " button will give an error ( one complication If the "Transfer Type" highlighted in Blue has an entry " either STD/ISD/ESP " then " Call Purpose " needs to be mandatory
3) somehow the information on the "Comment " field is not getting captured
4) If possible we want a warning indicator if two rows in a tracking sheet ( example London ) are the same based on Coloums B to I ( except C )
5) Is there any possibility to give a pop calender in the " scheduled date " section of Input screen (Row 33)
View 3 Replies
View Related
Jun 19, 2012
I'm trying to write a macro that will not allow a number to be zero. I have a macro that references a cell that if it is input to zero will create a loop that goes on forever. The thing is this cell will never have to be zero, so is there a way that I can write a macro that if this cell is zero, it gets reset to its previous value?
View 4 Replies
View Related
Nov 16, 2006
I am looking for a VBA event(?) code that would erase another cell if I enter a value in another cell, because the criteria is that only one of the cells are to be allowed a value per row.
ex: cells A1, B1, C1
if I enter 1 in cell A1 and then enter 1 in cell C1, I want cell A1 to erase and cell C1 would have the value 1. I am looking to create these sets for 200 rows.
View 3 Replies
View Related
Mar 28, 2012
In cells B7:B229, I only want the user to be able to enter 1,2,3, or 4. How can I force this on them?
View 1 Replies
View Related
Jul 9, 2013
In column A I have Dates
January till....
The code below count the number of months and then should create only, this amount of new tabs (based on monthlist array)
So if I had Dates from January till October it should create only 10 new sheets.
So far is entering all of them. I know I'm missing a loop somewhere
Code:
Sub AddSheets()
Dim lmax As Long
Dim lmin As Long
Dim lmonth As Integer
Dim cc As Integer
monthlist = Array("jan", "feb", "mar", "apr", "may", "jun", "jul", "aug", "sep", "oct", "nov", "dec")
[Code] ..........
View 3 Replies
View Related
Nov 8, 2013
I have a ctrl-q key activated macro (module 2) that successfully clears specific data entry cells in forms on two identically formatted sheets. How do I prevent access to that macro on the remaining three sheets of five in the workbook?
View 2 Replies
View Related
Oct 31, 2007
How can I restrict the user from entering anything other than the date and the proper format required for this input box? I am having a tough time figuring out how to check the input for the right date and format . .
Sub EffDate()
Dim a As Variant
a = InputBox("Enter the effective date" & _
" of the subject's lease using a 2 digit day," & _
" a 2 digit month and a 4 digit year" & _
" (dd/mm/yyyy).", "C/NC Analysis")
Range("U4").Value = a
End Sub
View 9 Replies
View Related
May 20, 2008
I have an excel sheet which acts as a form for multiple users, and I wanted to restrict the way certain cells can be filled in.
For example, if the value in Range E12:E100=PD then the values in Range B12:B100 must be blank. Is there anyway to do something like this?
View 9 Replies
View Related
Oct 14, 2008
I've a workbook (XL 2003) test-1.xls, and I need to restrict it to a specific computer with ID: my-a1234567k
(shown under ControlPanel::System::Computer Name::Full computer name).
Is it possible to code such restriction in the w/b Open() event to prevent opening the w/b on a different computer?
My computers each has a different OS (Win 2000, Win XP Home, Win XP Prof ), different Excel version (XL 2000, 2003, 2007), etc., and the majority of my workbooks have been developed and would work only in certain environment (e.g.; in XL 2003 only, or XL 2007 only, ... ).
View 9 Replies
View Related
Nov 28, 2009
for instance if i type in a particular cell any number 1, 0, 53 .. excel must not allow me to do this...
but there are certain value that have both number and alphatbets eg. 001 michael jordan ... cell should allow such values.
View 9 Replies
View Related
Dec 2, 2009
I have an array formula that I am trying to populate through VBA.
Here is the whole formula.
intFirstStyleRow = 63
intFirstDataRow = 3
intLastDataRow = 135
intLastStyleRow = 195
gintBOPromo1Col = 12
gintDataFirstStyleGrpCol = 32
gintDataLastStyleGrpCol = 56
gintDataFirstDptGrpCol = 58
gintDataLastDptGrpCol = 62
gstrcDataWorkSheet = "DATA"
Cells(intFirstStyleRow, gintBOPromo1Col).Select..............................
View 9 Replies
View Related
Aug 30, 2006
I am looking for a macro that would accept only one entry per selected ranges. It would be something like if there is one entry in range("b4:e4"), a message box would appear advising the user that only one entry is permitted in that range. It would give the option to delete the entry and to rekey the entry for that canditate.
I hope I am clear, if not let me know
1 entry in range("b4:e4"), per canditate
1 entry in range("f4:h4"), per canditate
1 entry in range("i4:l4") per canditate
1 entry in range ("m4:o4") per canditate
1 entry in range ("p4:r4") per canditate
1 entry in range ("s4:v4") per canditate
View 9 Replies
View Related
