Retrieving An Array Which Has Been Stored In A Workbook Name
Apr 7, 2007I've successfully saved an array of string to a workbook name. How do I get it back out as an array of strings instead of as a "Variant/String"?
View 4 RepliesI've successfully saved an array of string to a workbook name. How do I get it back out as an array of strings instead of as a "Variant/String"?
View 4 RepliesI'm trying to open multiple files, pass them into an array and then work on them but the code below doesn't work (receive a Run-time error '9' message)
Public aFile As Variant
Sub MultipleFiles ()
MsgBox ("Please select multiple book files (holding CTRL as you click on flies) before you click open")
aFile = Application.GetOpenFilename(FileFilter:="Excel (*.xl*), *.xl*", _
Title:="Select required book level files", MultiSelect:=True)
Dim i As Integer
For i = LBound(aFile) to UBound(aFile)
Workbooks(aFile(i)).Activate
'Do something, then repeat with next file in array
Next i
End Sub
I am facing the some issue while tried to display the data from array. Below is code I have to tried to display the data from array.
Scenario: I have assigned the few values in my excel to an array and tried to display the data stored in array
Sub Main()
Dim Rows_Array() As Variant
Dim i As Integer,
Sheets("EmployeeWise").Select
Rows_Array = Range("C6:C" & Range("C65536").End(xlUp).Row).Value
For i = 1 To UBound(Rows_Array())
MsgBox Rows_Array(i)
Next
End Sub
I have a Macro that is stored in a specific workbook,"Projection Modeler.xls" the last line performed in this macro is the close workbooks without saving chages(this needs to be done due to the way this macro was written, and it would take too long to rewrite). If I would then like to reopen this workbook, and then rerun this macro, can I do this from inside the current macro (in a new sub routine, for instance), or do I have to write a macro outside of the workbook and then open the workbook and call the routine?
View 4 Replies View RelatedI am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer
Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1
Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified.
[SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr()
Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
I am opening a workbook using a macro. I need to run a macro in the workbook I am opening when it opens. I have created a variable containing the workbook name but don't know how to use it to run the macro.
Dim WBName
WBName = ActiveWorkbook.Name
Application.Run _
"'DIST_91094_EDTABS_DIABETES CARE_07072006.xls'!aStartProcess"
'DIST_91094_EDTABS_DIABETES CARE_07072006.xls'! needs to be replaced by the name stored in WBName
aStartProcess is the name of the macro in that workbook I want to run.
I have tried to find how to retrieve a worksheet from a closed workbook and I am almost sure that there was an answer how to do this in FAQ but I cannot seem to find it, does anyone know where this thread is?
View 7 Replies View RelatedI'm trying to retrieve data from a workbook that is currently closed. The formula below works only if the workbook containing the data is open. Is there a way to use the following formula to retrieve the data from a closed workbook?
[Code] ......
I have the following code, which executes just fine:
[Code].....
The problem is that I need to run this again in a different column, and the data is held in another sheet that I have given the variable StepTwo to.
I'm not sure of the syntax to do this. Basically - this is what I need the code to do:
[Code] ....
Understandably this is totally incorrect, but it's the best I can do to explain what I'm actually trying to do....
The two parts of SUMIF are both held in a workbook that I've given the variable "StepTwo" to. Both sets of data are also held on Sheet(1) of that workbook.
Sub Macro2()
Dim stgSheets As String, Cnt As Long
Dim arrSheets()
Cnt = Sheets.Count
ReDim arrSheets(Cnt - 1)
For i = 1 To Cnt
stgSheets = stgSheets & Sheets(i).Name
arrSheets(i - 1) = stgSheets
'sSheets = sSheets & "", ""
Next i
[Code]...
I am trying to create a "macro" that will read values from one workbook into an array based on a key field. If the key isn't present the cells data is not to be stored. After the records are stored i want to test them agains a range in a differnt workbook. If the data compared matches a stored value, leave it alone. If there is no match, a cell needs to be added with a value stating a differnce.
Like i stated i am new at this and have no clue how to compare an data array to a field. Let alone read the values into the array.
I need a macro I have created to count the number of worksheets that exist in the workbook and save it to a variable. I have hardcoded what I need to get done below. I need to clean up sheets in an array that is greater than 3 (so any sheets that exist after the 3rd worksheet will be deleted) This needs to be done as part of an import process to safeguard from users importing different files more than once.
Sub clear_sheets()
Dim shts As Long
' count worksheet array here and save it to variable
For shts = 4 To 12 'variable will be used here instead of number 12
Sheets(shts).Select
ActiveWindow.SelectedSheets.Delete
shts = shts + 1
Next shts
End Sub
I have an array that consists of 120 worksheets within a workbook.
For example: Array(A,B,C,D,E,F,G...etc) for all the worksheets
Can I condense the array or change the format so that I do not have to list all of the worksheets every time I reference the array?
I have a worksheet (WORK1) that contains two columns of values that I can add to or change if necessary. The first column would be a text string (STRING), the second column would be its category (CATEGORY).
Example:
STRING CATEGORY
Chevron Gas
Exxon Gas
Vons Groceries
McDonalds Hamburger
In a separate workbook (WORK2), I have a column (A) which contains text. Ex:
A1 = "Station 2134 Chevron Motor"
A2 = "ExxonOil 234"
A3 = "Vons store"
A4 = "Hamburger McDonalds"
I would like to assign B1, B2, and so on... a CATEGORY if it contains STRING.
For this example, B1, B2, and so on... would be assigned the values.
B1 = "Gas"
B2 = "Gas"
B3 = "Groceries"
B4 = "Hamburger"
I have the below formula
=IFERROR(INDEX(Settlements!Account_No.,AGGREGATE(15,6,(ROW(Settlements!Account_No.))/(Settlements!Settlement_Date=TODAY()+1),ROWS(N$2:N2))),"")
I would like to copy it across and use different named ranges for the red part, hence have it reference to a cell with the name of the range.
i.e. (which doesn't work)
=IFERROR(INDEX(Indirect("Settlements!"&N1),AGGREGATE(15,6,(ROW(Settlements!Account_No.))/(Settlements!Settlement_Date=TODAY()+1),ROWS(N$2:N2))),"")
Create array set for checking multiple workbook?
[Code] .....
display workbook not found in Array set without Filepath, As for workbooks found we can use Dir function, but it is not work for workbook not found. The Dir() will return Blank.
e.g. in my filepath only has Book1.xlsx.
[Code] ....
MsgBox CountFound = 1
MsgBox CountNotFound = 3
MsgBox FileFound = Book1.xlsx
MsgBox FileNotFound = Blank
is there a a way to get an Array formula to work in a shared workbook? when this was put in the workbook It worked perfectly but I didn't think about the fact the workbook was going to be shared !
The formula is:
Code:
=LOOKUP("zzzzz",CHOOSE({1,2},"",INDEX(S$3:S$40,SMALL(IF(COUNTIF(L$3:L$38,S$3:S$40)=0,ROW(S$3:S$40)),ROWS(T$3:T3))-ROW(S$3)+1)))
Need a way to generate a list (i.e. array) of tabs available in the current spreadsheet?
View 3 Replies View RelatedMy company has complicated time sheets because we have several tasks that are billed differently to different people. Once a month we have to sit down and compile everything from several forms and so forth. I have created a worksheet that pulls all the numbers together so that they can simply be copied and pasted into our reports. The hope was to simply copy this worksheet into a time sheet workbook and it will pull out all of the correct numbers. Although all the time sheet workbooks are set up the same way, whenever I copy the file into another time sheet workbook the program keeps its references from the workbook it was in. Make sense? is there a formula that I can insert into an array to tell it to pull the information from the worksheet with the same name, but in the active workbook?
here is one of the equations I am working with:
{=TRANSPOSE('1st week'!A10:L48)}
so it would look something like this maybe
{=TRANSPOSE('[active workbook]1st week'!A10:L48)} but this doesn't work of course.
I've scoured the internet for this answer and have not found a formula that works.
I have a list of domain names/URLs in column A of workbook 1:
jhjh.com
hajfh.co.nz
123.123.12.12
I have a list of domain name extensions in workbook #2:
.com
.co.nz
.net
I want to determine if the cells in column A workbook one contain any of the strings in workbook 2 - note that I need to look at the string, not the entire cell in workbook one. If there is a match, true, if not, false for that cell within workbook one.
It's sort of a reverse array lookup with text. It seems that cross workbook and text is what causes the challenge.
Where are Macros stored? Are they stored just in the worksheet, or are they stored locally on the machine?
View 3 Replies View RelatedI have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
View 2 Replies View RelatedI have a spreadsheet with several tabs. I am wanting to lookup data in tab "A" based on data in a list. For example:
I may have:
Tab A
Tab B
Tab C
Tab D
Tab E
I have created a validation list containing A, B C, D, E I would like to use Hlookup to look up data imported into the table in Date order.
i have workbook in which I have two sheets, one of them cotains colums with information and in the other sheet I have to create a Search box to retrieve all from any Contact number, of course it has to be based on contact numbers culumn.
example:
CONTACT_NUMBEROPPORTUNITY_TYPEQUARTERCON_TYPECONTRACT_TYPE_DESCRIPTION_LINECURR_CODE
379159OUTSOURCE201002C4PSMARTnet Onsite Premium 2x7x4USD
389859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
379159OUTSOURCE201002C4PSMARTnet Osite Premium 4x7x4USD
388859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
and in the other sheet I have to create a search box template that based on the contact number it will retrieve all other information.
When I run it it returns in A1, Jeffrey.Brown2. I would like to turn this into Brown, Jeffrey but because another user may have a shorter or longer name the Left & Right function does not work for every scenario?
Sub who()
Range("A1").Value = Environ("username")
End Sub
MS Query can only hold 16 joins and some other restrictive requirements. Has utilized Stored Procedures to execute a query and have the results returned to Excel? Query in Excel seems very limited.
View 2 Replies View RelatedI need to call a Stored Procedure in a SQL Server from VB, but do not have the minimun Idea about doing it....Could you help me ?...I made a lot of attemps copiying code from other treads and scratch it, but so far results = none.
Server name: VAIO/SERVIDOR
DataBase: CEDRO
I´m using Excel XP.
Any way to actually execute a macro stored as a text file?
Without being long winded - I want to create different macro and physically save them as text files. Once saved - I could call them from a list.
retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
View 2 Replies View Related