what is wrong with the following code where I'm simply trying to return (evaluate) the name of a control toolbar object from a sheet: If ActiveSheet.Shapes(1). OLEObject.Name = "TextBox" Then
View 8 Replies
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies View RelatedI have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
I am trying to find a formula that references a cell on a spreadsheet (H7) which is really a Combo Box that is located on a range of cells K25:K30. I want to put a formula in H18, but of course, the combo box always references the range on K. i have tried the $K$25:K430, but i don't know what i am doing. The drop down menu and everything works fine, but the data IS stored elsewhere. HOW do i tell Excel to look at K25:K30,(depending on choice within combo) and then ad H8:H19? I have looked, but all answers are for forms. I am doing this for final exercise for a university course, and (hmmhmm) must folllow obtuse instructions.
View 7 Replies View RelatedI have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales
If .MultiPage1.Value = 0 Then
Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption
End If
End With
I'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
View 4 Replies View RelatedIs there any way to place a Control Tip for a shape on a excel worksheet?
View 3 Replies View RelatedI would like to use the RefEdit control in a worksheet in order to select a range of cells and pass its address to a different cell without code.
I thought of using the LinkedCell property of the RefEdit as I used it for a ComboBox.
When I place an ActiveX TabStrip or a MultiPage onto a spreadsheet, and then try to put a ComboBox onto the TabStrip, the ComboBox will fall behind the TabStrip when I run my pointer across the TabStrip. I used the Arange order from the Draw toolbar to place ComboBox on top and the TabStrip behind, but to no avail. (I would love to use a User Form but lack the VBA know how).
View 5 Replies View RelatedI want to know how to make a spreadsheet automatically control the zoom of a worksheet depending on the size of the screen it is opened on. For example, if it is opened on a screen of a certain size then it will set the zoom to 80% so the worksheet will show only a certain section. I want my worksheets to look the same on even the larger screens and not show the unused rows and columns around the section I am wanting to highlight.
In a previous thread I was told I might need to write an API to help me with achieving this. First of all, what is an API? Secondly, how do I go about writing one?
I have a spreadsheet with many cells that require a date. I have added calendar control 11.0 and running it with the code below. The problem is, that everytime the sheet is opened, the calendar gradually gets smaller and smaller each time the workbook is opened. I have tried resizing through formatting the object, but after opening the workbook several times, it's has shrunk down to unusable again.
Private Sub Calendar1_Click()
ActiveCell.Value = CDbl(Calendar1.Value)
ActiveCell.NumberFormat = "mm/dd/yy"
ActiveCell.Select
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Application.Intersect(Range("B161:B184,I161:I184,P161: P184,"), Target) Is Nothing Then
Calendar1.Left = Target.Left
Calendar1.Top = Target.Top + Target.Height
Calendar1.Visible = True
' select Today's date in the Calendar
Calendar1.Value = Date
ElseIf Calendar1.Visible Then Calendar1.Visible = False
End If
End Sub
how to get a list of the properties for form control shapes (not control toolbox shapes) that are placed on a worksheet (not on a userform). Eg., a button, checkbox, combobox, etc.
If it's possible, I'm interested in working with properties like "enabled", "caption", etc. that aren't listed on the "Format Control Properties" dialog.
I understand you can edit properties of a form control shape via VBA code (See example below), however, I can't seem to find anything within the object browser about them.
EXAMPLE
With ActiveSheet.Shapes("Scroll Bar 2").ControlFormat
.Min = 10
.Max = 150
End With
I would like to know if it's possibale to use VB, to auto manage these levels
IE, 1 box asks for the part number 2nd asks you how many 3rd/4th boxes are "+", "-"
When + or - is pressed the part number will automatically add's/subtracts that part level. I had 10x abcde's I enter 2 in "How Many", then press "-" it will then adjust the level from 10 to 8
I am creating a main worksheet (Legend) in which information will be entered and then populate to other areas (worksheets) within the workbook. I would like to create a print macro - that will run and print all the worksheets that we have selected on the "legend" page. These worksheets would have been selected by ticking a check box.
My question is how to associate a check box to a worksheet? For example - the second worksheet is named " Schedule A" 3rd "Schedule B" and so on.
- The check boxes will be name schedule A, Schedule B and so on.
- I would like to associate (link) the checkbox Schedule A with the Worksheet of the same name. Then when this checkbox is selected, and the print macro runs it will print the worksheets that are selected.
I have a database in Sheet1, and need to make a drop-down list for each column title, so that it would filter out the necessary letters or words. E.g. I type "au" and see the words starting "au" in one single list (like aura, aubergine, etc..)
View 5 Replies View RelatedI have a worksheet that has a Calendar on a worksheet from Calendar Control 8.0.
I want to be able to pick a month from the calendar and press a button to convert the selected month into a worksheet. I have a custom made calendar worksheet that I would like for it to be converted into.
I have uploaded my workbook. It contains the custom calendar worksheet as well as the calendar control.
The file is called "calendar.xls".
i have a user form with 4 combo boxes and one text box. what i've tried to do is make it so that if the month combo box reads january, then all of the info is placed in a worksheet called january. at the moment it is putting all the info inputted into one sheet. if some one could take a peek at the code below.
If cbomonth.Value = January Then
Sheets("January").Select
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) Or IsEmpty(ActiveCell.Offset(0, 1)) Or IsEmpty.....................
I have an image box on a userform in Excel VB. Is there ANY WAY to load an image into this image box from an object that I have loaded into an excel worksheet something like
If userform1.checkbox1=True Then
userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 1"))
ElseIf userform1.checkbox2=True Then
userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 2"))
Else
msgbox "No image"
Endif
I have set up a calendar control on a userform and got it to pop up when selecting one of 3 cells on a worksheet. The various bits of code making this work are below.
This code is attached to the Userform.
VB:
Private Sub Calendar1_Click()
With ActiveCell
.Value = Calendar1.Value
[Code]....
What I am struggling with is that I'd like to have the calendar that pops up in cell C18 (which is Date of Birth) default to starting on 1st January 1987 not todays date. Also, if there is a value in either of the 3 cells that use the calendar, then I'd like the calendar to display that date. If the cell is empty then todays date is fine for cells G3 and G26.
Excel 2010. How/where to define userform object?
Button on worksheet has following code:
Sub Button1_Click()
Load UserForm1
UserForm1.Show
End Sub
Execution of this code generates following error:
Run time error 424
Object required
How/where to define userform object?
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies View RelatedI am trying to get the lookup function to return the corresponding value in a separate worksheet where it occurs more than once in the lookup range.
At the moment it is only finding the first match. i.e. in
=VLOOKUP(A2,'Appointment Tracker'!A2:B9999,2,0)
I have a workbook with multiple worksheets. Several have hyperlinks to one sheet called Calculator where users can perform certain calculations using a calculator I have made. I want to use a macro to take the user back to the sheet they were previously viewing before they came to Calculator. In other words if they got there from Sheet2 they go back to Sheet2, from Sheet3 to Sheet3 etc. Is there a way to do this?
View 3 Replies View RelatedWhen I run my macro, it always ends leaving me having to scroll my worksheet back to the top manually. Is there a way to simplify this by adding a line of code to the end?
View 9 Replies View RelatedI am trying to create a formula to return values based on the Total of a Table in each worksheet.
Example:
Column A has a list of worksheet names
Column B I want to return the value of the Total from a table on the worksheet named in Column A.
Each Table might be different widths (i.e., not the same number of columns).
Problem, I want the formula to use the worksheet name to goto the correct worksheet, and retrieve the data.
Each worksheet will only have one table on it.
Return Worksheet Name to a Cell. how to do for worksheet name?
View 2 Replies View RelatedI am looking for a way to refererence the text of another cell, not the formula that it contains.
I have a workbok that has 5 worksheets. On the first worksheet, a certain cell (lets say A1 for simplicty) uses the function: UPPER(MID(CELL("filename"),( FIND("]",CELL("filename"))+1),50))
to retrieve the title of the worksheet. (ie, A1 now serves as a title cell, matching the name of the worksheet).
My problem is, on the following four worksheets, I also want A1 to reflect the contents of the first worksheet's A1. I've tried using =Worksheet!A1, and =CELL("contents", Worksheet1!A1), and so forth, but my problem is, it reflects the formula of A1, not the returned value of the formula (the title). Initially, it works, but if I recalculate the cells on the four worksheets, it changes them all to the title of the current worksheet, not the first worksheet.
Is there a formula that I can use to retrieve the TEXT and not the formula?
If column F, G, H says PAP then I want it to return information from column A, B, C, D, E respectively into another worksheet. I have attached a sample
View 6 Replies View Related
