I am trying to return the value in the cell immediately to the left of a Maximum value found in 3 cells. I've added the MAX(Q4,S4,U4) formula into AF4. I've tried several variations without success.
View 5 Replies
Trying to grab the value to the left of the max value in a range of cells. Wasn't sure if I needed to use the offset function, I tried the vlookup function but the value i'm searching for is in the 2nd column, not the first. I can't download files at work, so if you could examine the example spreadsheet i uploaded, and then type the formula I should use in the post.
View 2 Replies View RelatedI have a table of data in cells B1:F5. I want to find the maximum value for each line of data from D:F and record the maximum value in cell H and then the heading (held in row 1) in cell I. Some one has kindly given me some code which has gotten me very close to this goal, but it doesn't quite work. I've been through the code line by line several times and I can't figure out where the problem is. I've included my code and the file.
Sub FindWinner()
Dim lngEntryRows As Long
Dim lngRow As Long
Dim rngEntries As Range
Dim dblMax As Integer
Dim intMaxCount As Integer
Application.ScreenUpdating = False
lngEntryRows = Range("C65536").End(xlUp).Row
lngRow = 2
Do Until lngRow = lngEntryRows
Set rngEntries = Range("D" & lngRow, "F" & lngRow)
dblMax = WorksheetFunction.Max(rngEntries)
Range("H" & lngRow).Value = dblMax
intMaxCount = WorksheetFunction. CountIf(rngEntries, dblMax)
If intMaxCount = 1 Then
Range("I" & lngRow).Value = Cells(1, WorksheetFunction.Match(dblMax, rngEntries)).Value
Else
Range("I" & lngRow).Value = "Draw"
End If
lngRow = lngRow + 1
Loop
Application.ScreenUpdating = True
End Sub
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .
My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).
As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.
Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.
And also if A=B then I want to make that unwanted value cell="".
I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
=SUM((Download!$H$2:$H$10=A4)*(Download!$D$2:$D$10=MAX(IF(Download!$H$2:$H$10=$A4,Download!$D$2:$D$1 0)))*Download!$I$2:$I$10)
Would a Index/Match/MAX function be more efficient?
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
View 2 Replies View RelatedI have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example:
type value
A 15
B 6
A 21
C 7
B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
In a cell, I would like to limit the maximum upper limit. For instance, in a cell with (=H23*0.06), that value ranges from perhaps 1.48 up to 5.93; however, I would like for the upper limit to stop at 3.33. Would that be conditional formatting? How can I stop the upper limit at 3.33?
View 2 Replies View RelatedI need to just highlight the maximum value in a column. This will be for several excel sheets within powerpoint, and preferably automatically updated?
Something along the lines of:
VB:
If
Ax = Max(A1:A3)
Then Ax = red
Else = white
End
I am looking for VBA that will add the value of the current active cell on the sheet to the value in cell F12. The maximum value of F12 cannot exceed 1000. So if the value in F12 = 950 and 100 is the value in the active cell the maximum value in F12 should show 1000, not 1050.
It should do this on the click of a button.
I need to limit the number of letters that a person can write in a given cell.
View 5 Replies View RelatedI have a worksheet that multiple users will be entering in data, this information is then being used to pull into a form located on a sepearte worksheet within the workbook. One of the cells in the input sheet has the potential to have more characters than excel will allow. It is my understanding the maximum number of characters per cell is 1,024.
What is the best way to setup my spreadsheet in the event the data contains more than 1,024 characters. The informatino going into the cell are legal descriptions of property so I want to be able to keep the description together in the final document in the other worksheet. Is there a way the user can input the entire decription in one cell, regardless of the character size, then have a formula to take the first 1,024 characters and put them in one cell, followed by another formula to put the next 1,024 characters in the next cell?
Then in my main document I would use the concatenate formual to combine these two cells into one.
I have a problem looking up the cell at which a maximum value in a curve is located. I have attached a workbook with an example of my problem (this is scaled down to limit the size of the attachment – my usual string of data is 5000 rows long). Column A is the time and all subsequent columns will contain force values (as shown in columns A and B) which create a similar sharp curve.
Ideally I need to be able to lookup the time point (column A) at which the maximum force value occurs for each curve or if this is not possible the row number in which the maximum force value occurs. I would like to be able to do this using a formula rather than a macro if that is possible?
I have tried using a number of excels lookup functions and read through the examples on the site but have had no success.
[TABLE]
item01/11/200702/11/200703/11/2007
a1710
b2611
c359
[/TABLE]
I have the above table. I would like to determine which is the item that has Maximum value on a particular date. example on 2/11/2007, the maximum value is 7, so the result should be item a. How can I achieve this by using a formula.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
How to format a cell to be normal color unless cell left of it is not empty and this cell is empty.
And I need to format whole sheet to this rule.
example.png
I am sure this is simple and easy to do, but i am having difficulties achieving this.
I want the cell to fill as it gets closer to 100%, I am sure its conditional formatting but I cant seem to get it to work.
I'd like to have the cell address returned along with a value when I use the
MAX function.
I have a range of overtime data. I want to list the maximum occurrence of first 10 overtime data ( Like 3200,2950.2300....etc) Thereafter from the results obtained I need to know the cell address of the employee corresponding to the results obtained, i.e XYZ, ABC.....
A B
Employee Name OT Amount
1. XYZ 3200.00
23. ABC 2950.00
35. WER 2300.00
What formula can i use to obtain the address of the cell which contains the highest number? My range is A:A
View 2 Replies View Related* I hav two columns B and N having some data. From column N i need to find the Maximum valued cell.
* And now i need the content of a cell in column B in the same row , which matches with maximum value.
If I have a column full of data (call it 5000 data points) and use =min(a1:a5000), how do I find the cell this function is referencing without sifting through 5000 entries?
View 6 Replies View RelatedI have a spreadsheet where I need to check if one cell value is greater than 6 other cell values in the row, then have it enter 1 in another cell if so.
For example: C1=5 C2=2 C3=3 C4=2 C5=7 C6=0 C7=4
The largest value is in cell C5, so I would like C6 to show that it is by entering a 1 in there.
I have two columns of numbers in column A & B. In column A I am trying to locate the maximum value and get the cell address of the number next to it in column B. I am currently using this formula to do this ..... =ADDRESS(MATCH(MAX(A1:A4),A1:A4),2,4)
It works ok, but if the maximum number is the first value in the column it is returning the last cell address in column B. I am not sure what I am doing wrong.
I have got this working so far:
=LOOKUP(D9,'Financial Snapshot'!$H$5:$I$95)
D9 = 1.01
D10 = 1.02 etc
[Code]....
I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
View 7 Replies View RelatedI would like to add a value to a cell. The value in this cell will either be 1, 2, 3 or 4.
The value of this cell needs to be "1", if the cell to its left is "Red".
The value of this cell needs to be "2", if the cell to its left is "Purple".
The value of this cell needs to be "3", if the cell to its left is "Green".
The value of this cell needs to be "4", if the cell to its left is "Blue".
I believe I need to find the HEX values for the colors, but that is no problem, I just need the formula of the function if you know it.
