I am running a worksheet that runs through 4 week periods.
Example: 10.1 10.2 10.3 10.4 11.1 11.2 11.3 etc.
I wish to insert a formula that will roll forward or back this data when required.
I have no problem rolling whole numbers & dates.
Iam using Excel 2000.
how to make a code that will display a random number 1 by 1 and fast in a single textbox so it will make un illusion that it is searching numbers..
View 7 Replies View RelatedI need a formula to add data in it's respective column, only if the month and year match.
The columns of data will be very long, thousands of lines possibly.
So, basically, in this example.
in O1, if the the data in the columns below match the month(M1) and year (N1), then sum those variables.
I have created two names within column A (ie: Insert/Name/Define)
in cell A1 I've named StartA01
in cell A5 I've named EndA05
I would like to create a sequential number within this range via script, whereby when new rows are inserted, the script will update the order.
eg:
begin with:
A01
A02
A03
A04
A05
3 rows inserted will update to:
A01
A02
A03
A04
A05
A06
A07
A08
I am trying to make excel list in a column like 1,2,3,4,5. this is dependant on a value i place in one cell eg 5
i want excel to then place 1,2,3,4,5 in seperate cells down a column. does this make sense.
then the calculations will only appear the the numbered cells.
I have a sheet where one column has sequencial numbers from lowest to highest with some missing. So for example: A1 1, A2 3, A3 5, A4 6. Is there a formula that will display all the numbers that are missing from this column without skipping rows? So let's say: B1 2, B2 4 ect.
Basically I will be putting this on a different tab, so someone can go to that tab and see what numbers have not been used. It is a large range and is difficult for someone to scan through it all.
I have a column of an undefined number of rows where I need to add item numbers from 1 to however many items there are, starting from A9 downwards.
The last 3 used rows on the sheet contain signatures etc so it should not number the bottom 3 rows.
pretty sure its fairly simple code but i dont have anything similar from previous files that i can re-use to do this :p
just needs a simple
count how many rows are blank from A9 downwards (to say A200)
for num=1 to count do
Cell range(A(9+num) = num
end
i just dont know the code well enough to write it and make it work :p
I currently have an array that is 6 columns by 7 rows that is populated by referencing other workbooks and returning the sum of their values. For issue tracking revison etc... I would like to have the rows incrementally numbered (0,1,2... until it reaches number "X" which is a grand total in one of the fields.
This would happen for column 1 row 1 all the way through column 6 row 7 and fields with 0 as a total don't get a number or can have a 0 or blank.
Ex.
1 2 3 4 5 6 (rows)
1 3 x x x x x
2 x 7 x x x x
3 4
4
5
6
7
row numbering...
1
2
3 (skip col. 1 row 2)
1
2
3
4..... continues on till the end.
I would like this to be something somewhat automatic to eliminate the redundancy of having to manually perform this task.
How do I get my worksheet (ServicePlan) to update column A (plan number) after deleting a the row from a userform. When I delete the row the plan numbers do not update.
Example: I delete plan #1 from the worksheet. The plan number #2 should now be amended to read plan #1 and the plan number for record #3 should now be amended to read Plan #2, however the plan numbers #2 and #3 remain the same.
Plan #Rv# Name:Dept: Rep:
11.1mikeEnvironmental Cathy S.
22.1TomCasualty Rich A.
3 1.5 Michelle Special Programs Diane
Here is the code I used for the delete plan # button. Thank you
Private Sub CommandButton15_Click()
If MsgBox("Are you sure you wish to delete this record?", vbYesNo, "Confirm Deletion") = vbYes Then
sheet1.Activate
Dim strFind
Dim Nullstring
Dim rSearch As Range 'range to search
Set rSearch = sheet1.Range("A2:A1000")
Dim c
Dim r As Long
I have two columns A and B filled with numbers. Column A has the identifier number and Column B has number that represents intensity for the data set.
Column A can be anything from 75-1000, however, sometimes the adjacent rows are not sequential (i.e. 101, 102, 104).
1) Is there a way to automatically check for skipping numbers in Column A.
2) When it finds a skipped number, insert a row for column A and B.
3) Then put the correct number in Column A (i.e. 103) then put 0 in for column B
I am trying to create a summary sheet that will look on certain worksheets based on on a cell. For example:
If cell E1 equals 10-Oct-30 then it will pull data from tab 'End Oct 30' I would prefer to use a formula for this calculations. to aid in another persons potential use. A custom function would be OK.
i found a macro that im trying to get working from the site below to generate a number everytime my template is opened.
ive put the code in the thisworkbook module as directed and changed the relevant path but it doesnt do anything i think im missing something but cant see what. this is the code ive placed in thisworkbook module of my template
I am busy with a very large dataset +-20 000 records showing the movement data
and I am having problem with inserting missing data: I have columns titled day hour and position, but multiple records for each as data was initally recorded by second. Data looks like this
Day Hour Position
1 2 Z5
1 2 Z5
1 3 Z5
1 3 Z4
1 16 Z1
12 2 Z3
13 0 Z3
What I need to end up with is a sequential dataset running from day 1 to 388 with hours 1-24 of each day. Positions need to be filled in for all data recorded (see above). The big problem is that movements between positions need to be recorded and accounted for i.e if more than >80 of time was spent at the position Z3 then that is the position for the hour.
The excel file has industrial information arranged by sector. The sectors are represented by six digit codes that are not strictly sequential. For example, a typical example of consecutive codes is 120011,120012,120030,120040,130011. There are upwards of three hundred sectors.
The data I am using is missing certain sectors - sometimes more than 30 at a time. I would like to find a quick way to identify the missing sectors and insert rows there, preferably with the first cell in the row being the missing sectoral code.
I have a similar problems with columns as well. But I can always just transpose the data and use whatever solution works for the rows.
I am looking for a way to define a 'Data Validated' Cell to hold a List of Dynamic Sequential Numbers - from 1 to the Value of cell A4. For example:
If cell A4 has a value of 5 the 'Data Validated' List will be 1,2,3,4,5
I have tried to 'name' the Array-Formula {=ROW(INDIRECT("1:"&A4))} and put the 'name' as the List source but without success.
I have a form made that needs to copy a value from another sheet. The Form is 10 rows 5 columns and and in format for easy print. On sheet2 I have a column where each row is filled with a name.
I need to put this name into sheet1, so in the the appropriate cell I put =Sheet2!B2 and it gives me the value (name) from the other sheet.
Then I want to copy the form bellow the 1st one so that I have the same form but with the next name, which means I want =Sheet2!B3 to appear when I copy, but since my form is 10 rows when I copy it the formula copies to =Sheet2!B12 instead of B3.
I need to make close to a thousand of this forms ready for printing and I would like to avoid having to manually set the formula for the next cell.
I am trying to set up excel sheets for documents that we print often. I would like to print them with page numbers in right footer that increases sequentially.
setting up a macro. But very time I print it starts from same number instead of the number after where I left off. Example: if I print today with page numbers 1 through 12, next time I want it to print number 13 through whatever no of copies printed.
Here is the code I copied from one of the threads here:
[Code] .....
I need the page number in right footer and also the macro to save the last number printed.
In the attached workbook I'm trying to populate Column E with sequential numbers (as shown) based upon a changing range (defined as a named range called 'range'). Is it possible to write a formula in the cells in Column E that will do this?
View 2 Replies View RelatedI have the following working great, but would like to see it refine a little, as the data vlookup is 6 digits, but i only needs the last 4 digits is enough for me to work, my question is how do i go about adding that to the following function i have implemented and working fine.
=IF(ISERROR(VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)),"",VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)
I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
I have the following formula =IFERROR(ROUNDUP((+G5+G23+G41+G59)/4,0),"") that if it returns an odd number as in 3 or 5 or 7 or etc i want it to display 4 or 6 or 8 or etc
View 18 Replies View Relatedbelow fig 1 is a part of a worksheet we are using for Stock. The idea is to track stock write downs on a yearly basis. Where I am struggling is a formula to carry the stock balance and value forward if there has been no movement in a given year.
The enteries in green (fig1) colums "Stk Forw" & "Car Fwr" represent how I would like the info to look.
Is there a formula that could look for the last entry in "Stk In/Out" if the column "YTD to date" is empty and carry that value forward to the next row.
I Would also need a formula to sum the Total & Car Fwr colums as one total.
Fig 2 Shows the formula I am currenlty using.
I'm writing a VB macro that will find the start time and finish time of a job and then work out the time it took to run.
So for example:
D E
09:53 wsp285A 09:53 wsp285A 09:53 wsp285A 09:53 wsp285A 09:53 wsp285A 09:59 wsp285A 09:59 wsp285A 10:06 wsp285A 10:06 wsp285A 10:13 wsp285A 10:13 wsp285A 10:20 wsp285A 10:20 wsp285A 10:26 wsp285A 10:26 wsp470a 10:29 wsp470A 10:29 wsp470A10:29 wsp470A 10:29 wsp470A 10:29 wsp470A 10:29 wsp470A
In the above I want to work our how long job 285A takes, I will need to find the first instance of the job by looping forwards through the data, and the last instance by looping backwards, then taking the last time away from the first.
The only problem is, I have no idea how to write this in VB!!
The job name is always in column E
The time is always in column D
I want to paste the time taken in for arguments sake in cell E1 of the current worksheet
if it is possible to roll over a cell in column B2 and have a little box pop up with the value that is in cell Z2? B3 and Z3...so on and so forth?
View 14 Replies View Relatedi am trying to determine how to use the workday function to generate only workdays for 1996 and forward. Each year is listed in a separate column.
View 9 Replies View RelatedWhen copying the formula =SUMIFS(G3:G103,I3:I103,"3") how do I modify it so that only the "3" rolls to the next integer and the rest of the formula remains constant? In other words the 3 would roll to a 4 when copied down a column and the rest of the formula does not change?
View 4 Replies View RelatedI have been supplied a spreadsheet (see attached example sheet) which contains data on a project I am working with. Essentially the guy who has supplied me the data has been lazy and only provided values once within the sheet which makes filtering extremely difficult. I have made the cells on the sheet A3:F23 in the format I ideally require. Cell A26 onwards is the format in which the data is currently supplied to me.
Column A (Box No) should roll down the same value until the value changes, where a blank row should be left as already exists and the same process of roll the value down until it changes, leave the blank line and then roll down the next value. This should continue until the data ceases at the end of the sheet - I have made the example sheet short but there are tens of thousands of box numbers. Columns B (Box Type) and C (No of Bundles) should also remain constant where Box No remains the same and should be rolled down until the value of column A (Box No) changes.
Finally column D (Bundle No) should be rolled down independently of A,B,C and needs to change whenever a new value appears within the sequence for column D. Again when this changes the blank row should be left and then the new value rolled down until it changes again. I have tried in vain to try and create a macro within Excel to do this but have failed miserably.
I want to make a template in excel. Lets assume I have Opening Balance in A1 and closing balance in B1. How do I make template make new sheet and every time I make new sheets it should take the closing balance of the previous sheet as the opening balance and so on and so forth. But the very first sheet needs to have the opening balance as unlocked cell but the rest of them needs to be locked.
View 7 Replies View RelatedI have a spreadsheet stating a date that my company will deliver a product by but due to a set of certain circumstances we need to pull forward the dates by 3 or 5 working days. Basically it needs to show the dates below but minus 3 days unless this includes non-working days (i.e. weekends)
01/01/10
02/01/10
03/01/10
04/01/10
05/01/10
06/01/10
07/01/10
08/01/10
09/01/10
10/01/10
Is there anyway to be able to bring decimal point forward without affecting the numbers using any formatting, which will still be there even after refreshing the query.
For example, 0.0531 to 53.1