Recently I come across a file with only 1 sheet, in which is a table only occupied an array of A1:Q49. In Normal View I can see the row / column header of A-Q and 1-49 as usual, but nothing outside that range (only grey colour). Also, the empty cells outside A1:Q49 are all grey too. How can I do that?
View 2 RepliesI have a workbook that, when opened, sets the view to full screen. When it is closed, I want the view reset to normal.
The problem is that the prompt to close full screen appears rather than the view automatically resetting to normal.
What additional codes is needed to fully automate this?
I have:
ActiveWorkbook.Save
Application.Workbooks("PCAR Log.xls").Close (0)
Application.DisplayFullScreen = False
I printed my graph after editing it while in normal view. It did not appear on paper like it looked on the screen. I switched to page break preview to see if I could see the problem and noticed that the printed version matched the page break version. I am using text boxes for some of my data on the graph itself, and the boxes, moreso than the bars, appear differently between views. This has never happened before, and I print this graph every month after changing the parameters and data. To my knowledge, I did not change anything out of the ordinary.
View 2 Replies View RelatedI lost the formatting in a 6 page spreadsheet. It repeated the top row, much as a header. I constantly delete and add rows, so it was nice to have the row in place as I scroll. It was better than freeze pane.
View 2 Replies View RelatedI have a workbook that is setup with headers and footers. To the right, left, and below the worksheet there are other pages greyed out pages that are not being used. Is there a way to change the view and potentially remove these "other sheets?"
View 3 Replies View RelatedI have an issue on manipulating the data in my worksheet below. I need to update column 'remark' when the customer has pay fully. Example customer 1003 and 1004 both pay completely so I need to update done in column remark. For customer 1002, because not fully pay, so cannot update done.
customer inv no invoice payment remark
1002 A12 100 100
1002 B45 120 0
1003 W12 90 90 done
1004 F12 30 30 done
1004 F17 45 45 done
May I know what function or coding can achieve this?
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
=IF((P3<$Q$1),E3-S3,IF((G3="B"),"Not Changed",IF((G3="MT"),"Not Changed","Not Changed")))
Above is the formula I'm trying to get to work but it's not-a-happenin. It seems like the first IF overides all of the others. Basically I want the first IF to be ignored if column G contains any of the words shown. So basically what I think is happening is that P3 is less than Q1 so it's ignoring the rest of the IFs.
Originally my formula worked fine as:
=IF(P4<$Q$1,E4-S4,"Not Changed")
But I realized that i needed a certain category of product ignored. Products are labeled in column G.
I'm working on a project where column A will always have numbers added every month. How can I get column B1 to automatically retrieve the last number shown?
Example
Month 1 Month 2
Column A Column A
1254 1254
5871 5871
5654 5654
5301
5024
Each sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
View 3 Replies View RelatedFor column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I would like the user to enter a password to unhide a column. I am aware of how to use a password to unhide a worksheet, but now I would like just a column.
View 9 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
How to fill a multi-column ListView? I can get the first column, but not the second.
View 1 Replies View RelatedI would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
[Code] ......
This works, UNLESS "My Column Header" is the last column, or second to last column, then it jumps left two columns, instead of landing on the correct column.
The purpose of this script is to select a cell directly in that column that I was searching for.
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
My data is in colunm set #1. I want to create from the data set in column set 1 the data set shown in colunm set #2. I want to automate the process. The program needs to regognize if a name appears only once or more than once. If it appears more than once the data needs to be merged as I highlighted from yellow to green.
View 4 Replies View RelatedI'm looking for a formula that will return the column header (a date) of the first instance of a number greater than 0. For example if columns A through S had dates as in row 1 (header row), and in row 2, every column contained a 0 up until column P, I would want the date (Row 1, Column P) returned? I think this might be a sort of index/match formula, but I am not very familiar with these.
View 3 Replies View RelatedI have a spreadsheet with several columns (all column names are in row 1).
I have 2 of column names. Note that their actual column# might change so the macro would have to look for the column name and NOT the column position ...
I'm no expert with my vba, record a few macros and make alterations to existing code but this is driving me crazy.
I have a simple script which I would like to update all DB links and all Pivot Table information, which my code does but i'm currently having to run it twice before it shows the correct results.
When clicking on the sorting button of filtered data near the top of a field, I can select different things to show or not show. In a date field, it starts to arrange things by year, which can be expanded to months, which can further expand to show individual days. All well and good.
But many of my dates do not show up in the year categories. They are instead shown below the years as individual dates. Furthermore, sorting the date field in question is imperfect for these dates. Here is an example where some dates from april are jammed inbetween others:
4/2/20124/2/20124/2/20124/2/20124/20/20124/20/20124/20/20124/20/20124/20/2012
...
4/27/20124/27/20124/27/20124/27/20124/3/20124/3/20124/3/2012
These jammed dates are some of the same ones that are orphaned outside the year groupings. All the dates have the same date cell type. No other filters are applied.
I'm working on a project and am particularly new to the whole excel world (especially with macros). Currently, my boss has some data that needs to be refined and organized. Until I get a sense how to have a macro do everything all at once, I plan on have macros do each step more quickly.
Right now, the macros my boss has given me allows the data to be organized into clusters. Each cluster is separated by client IDs in column C. Each cluster is separated by a blank row. We are looking for clients who have not paid their dues and are marking their unpaid dues with colored rows. The dues that are paid are left as white. However, there are clients who do pay their dues, leaving their entire clusters white. I was wondering if there is a macro to remove those fully white clusters.
I am trying to sort a csv file through a VBScript. My problem is that Excel continues to run as a process on script completion. Running multiple variation of this script results in multiple instances of Excel being present in the WinXP Process Manager.
Set xlObj = CreateObject("Excel.Application")
xlObj.Visible = false
xlObj.Workbooks.Open "C:Test.csv"
xlObj.ActiveWorkbook.ActiveSheet.Range("A1").Sort xlObj.ActiveWorkbook.ActiveSheet.Range("A1"),,,,,,,0
xlObj.ActiveWorkBook.Save
xlObj.ActiveWorkBook.Close true
xlObj.quit
set xlObj = Nothing
As a second part to my question, is there any way to modify the code to allow multiple field sorts, i.e., A1 is Primary, C1 is secondary?
I have a workbook which when opened connects to an external datasource (excel file) and downloads a table of information. While this is happening I have a userform which shows which has a lable saying (connecting to datasource, please wait....). However, when I open the workbook, the userform shows but the labels do not show, the userform just appears white.
View 4 Replies View RelatedI'm trying to run a macro that only shows completed projects, which means all elements of a project have been labeled "Completed". See example below; 1868 is the only project I want to see when I run the macro, 1869 and 1870 are fully complete, so I don't want to see them.
Project #Status1868Complete1868Complete1868Complete1869In Process1869Complete1870In Process
I would like to add the column header to each of the row item and price, we maintain masters in the matrix format, butthe application supports only the row item mapping with the customer and pricing. Attached excel file
View 2 Replies View RelatedI have two lists and wish to compare them to identify duplicate values. I have used Duplicate Values in Conditional formatting but cannot find a way of ensuring an exact match. For example one list has the value 4150 and the other list has other values like 5641509 and 341508, both of which contain the string 4150 but are clearly not the same value. However, the conditional formatting is picking these up as duplicate values.
View 6 Replies View RelatedI'm trying to calculate the number of rows in a matrix that have a complete row of data. I would noprmally do this using nested if formuals and a count function, but the columns of the matrix are filterable so the count won't work.
Is there a combination of functions that will adapt as I filter data?