Run Macro When Cell Value Alters/Changes
Oct 4, 2006
I have the code below that runs the macro BUYSELLSORT, this runs as soon as I click in the relevant cell BEFORE I have chance to enter new data into that cell.
How would I alter it so that it allows me to select the relevant cell,enter the new values in that cell and THEN run the macro.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Row = 3 And Target.Column = 58 Then
BUYSELLSORT
End If
End Sub
View 4 Replies
ADVERTISEMENT
Feb 12, 2010
I'm trying to alter a filter ion a range to include all items selected within a listbox, here's what i have so far: ...
View 6 Replies
View Related
Jan 25, 2007
I have a time entry spreadsheet where I total hours worked based on the time code entered in the cell next to the hours. I use a formula such as the following: =SUMIF(F11:AS19,"=AN",E11:AR19) which checks cells F11 thru AS19 for the timecode AN and when found, takes the hours in the cell before the code and adds them to the totals way off to the right.
The problem is that when someone does a cut and paste to the time data within the range of F11:AS19 and pastes it somewhere else, like to the next employees data (no formulas are being cut and pasted, just the detail data), the formula for that new line automatically changes to exclude the cells that were pasted over. It is as if Excel thinks that you pasted over that data so it is no longer of interest to you.
It is odd because you can cut and paste smaller ranges within that range with no effect to the formula but if you include the first column or the last column of the range in your cut, then the formula gets altered. If you cut and paste the entire range, the formulas all change to #REF!
View 9 Replies
View Related
Jan 15, 2014
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
View 9 Replies
View Related
Aug 13, 2014
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
View 2 Replies
View Related
Mar 16, 2007
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
View 2 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
May 14, 2014
Basically, what I'm dealing with is an inventory system. When a cell value reaches below a certain quantity, we have a cell light up with the word "YES" (under the "re-order" column). What I'd like to do is have a macro that checks to see if that cell is populated with "YES" and if it is, to run another macro (which I already have written) that sends out an email notifying us of the need to re-order.
How it would work: The person pulling out the inventory would fill out this form and click "Submit"
submitbutton.jpg
I would then have a "call" code tied to the "Submit" button that when clicked, would run the macro to check cell population and send out the email. The email code is already written and works flawlessly on it's own. I just cant seem to figure out how to write a macro that checks for cell value and then runs it (or not) based on that.
View 14 Replies
View Related
Mar 18, 2012
I would like to make a macro that loops another macro and changes a value in a cell, like such:
Run macro
if cell A1 = cell A2
Stop
Else set value in cell A1 -0.1
Loop
How exactly would i do that?
I have a little bit:
Sub Macro2()
Call wantedmacro
With Range("A1")
If .Cells(1, 1).Value = "A2" Then Exit Sub
Else Range("A11").Value = (A1-0.1)
Call Macro2
End Sub
View 4 Replies
View Related
May 17, 2013
I have a macro called "ResultCopyPaste". When it is run it copies and pastes some results. I have a cell C23 that counts how many more results need to be run, copied and pasted. As each result is copied and pasted the count changes. When the count gets to zero nothing else needs to be done.
I want to create a macro that will repeatedly run the "ResultCopyPaste" macro until C23 shows zero. What is the VBA code? Presumably something to do with repeating the macro if C23>0
In case it's relevant the code for the ResultCopyPaste macro is:
Sub ResultCopyPaste()
'
' ResultCopyPaste Macro
[Code].....
View 2 Replies
View Related
Feb 18, 2009
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies
View Related
Mar 27, 2007
I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
View 2 Replies
View Related
Feb 19, 2014
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
View 7 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Feb 6, 2008
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies
View Related
Sep 30, 2009
My question: Is it possible to write a code that calls the macro with the name specified in a particular cell? Right now I have some AutoFilter going on making a list that has numbers 1, 2, 3... I also have alot of macros named Search1, Search2, Search3... So I can make a cell, say A28, that combines "Search" with whatever number is in Column C, row 29:
View 2 Replies
View Related
Oct 23, 2013
I am attempting to create a ROI calculator for my place of work. I want a blank cell to fill in green or red based a cell below it being equal or greater than 5.0%. What is the Macro or equation to do that?
View 5 Replies
View Related
Aug 6, 2014
I have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.
I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.
It would basically say :
If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).
View 10 Replies
View Related
Jan 12, 2009
I did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
View 11 Replies
View Related
Feb 26, 2009
I have many workbooks which all have a summary sheet called summary, and which are all kept in the same folder (although this folder name/filepath may change from year to year).
I want to be able to set up the column headings and then copy the same set of summary information from each book so that it can then be used for analysis. The cells to be copies derive their value from formulae, it is the value that needs to be copied.
I attach a workbook with the format needed and the source cells. The source sheet will be password protected.
I know this is a question that has been raised before and I have searched the forum but not come across a question that is close enough to work from - my VB skills are appalling.
View 14 Replies
View Related
Dec 29, 2009
Before unloading a userform the range to select the active cell is set to
View 3 Replies
View Related
Feb 5, 2010
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies
View Related
Feb 5, 2014
I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies
View Related
Feb 20, 2008
I'm trying to write a macro similar to the one found here: here:http://www.techonthenet.com/excel/macros/checkbox.php.
Rather then use a textbox, I would like the cell to display the date when text is inserted in the cell to the left.
ie. I insert text (the letter 'a') in cell E11, and the date appears in cell F11.
I would also like the macro to do this for a range of cells ie. for E11 to F21, then from G11 to H21, then from I11 to J21, all the way to column IV.
View 9 Replies
View Related
Apr 23, 2008
I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies
View Related
Jun 3, 2008
I have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
View 3 Replies
View Related
Jun 20, 2014
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
View 4 Replies
View Related
Apr 9, 2009
I am trying to write a macro where I divide the value of one cell by that of a second cell, multiply it by 500 and then to paste the outcome of the formula to a third cell. This is what I wrote
View 5 Replies
View Related
May 29, 2009
In one column (Column A) I have a column of data which contains long descriptive text - i want to extract a specific piece of text from this descriptive text and enter it into the next Column (Column B).
E.g. Cell A1 = "Hello Buddy, how are you?" - i want to extract the word Buddy and enter it into cell B1
then A2 into B2, A3 into B3, etc, etc,...
Is there a simple macro out there that can do this?
View 7 Replies
View Related
Mar 7, 2011
I have to loop through a range in A, and if the letter "C" or the number "9" appears in the cell anywhere (it won't be a whole cell value) then I need column B to show "C".
I know how to do a whole value loop, but I'm stumped on a 'find X anywhere' search.
View 8 Replies
View Related
