I have a time entry spreadsheet where I total hours worked based on the time code entered in the cell next to the hours. I use a formula such as the following: =SUMIF(F11:AS19,"=AN",E11:AR19) which checks cells F11 thru AS19 for the timecode AN and when found, takes the hours in the cell before the code and adds them to the totals way off to the right.
The problem is that when someone does a cut and paste to the time data within the range of F11:AS19 and pastes it somewhere else, like to the next employees data (no formulas are being cut and pasted, just the detail data), the formula for that new line automatically changes to exclude the cells that were pasted over. It is as if Excel thinks that you pasted over that data so it is no longer of interest to you.
It is odd because you can cut and paste smaller ranges within that range with no effect to the formula but if you include the first column or the last column of the range in your cut, then the formula gets altered. If you cut and paste the entire range, the formulas all change to #REF!
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
I have the code below that runs the macro BUYSELLSORT, this runs as soon as I click in the relevant cell BEFORE I have chance to enter new data into that cell. How would I alter it so that it allows me to select the relevant cell,enter the new values in that cell and THEN run the macro.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Row = 3 And Target.Column = 58 Then BUYSELLSORT End If End Sub
The formula that works is =SUM(IF('Pipeline Input'!$X$13:$X$39=1,IF('Pipeline Input'!$H$13:$H$39="Lead",'Pipeline Input'!$K$13:$K$39,0),0))
I am trying to modify this formula so that the ranges are dynamic to allow me to add new data with an insert at row 13. What would the syntax of the formula look like if I use the INDEX function to allow the ranges to grow with new data? I have tried naming the defined ranges and entering the formula as =SUM(IF((CloseMo)="1",IF((SaleP)="Lead",(LoanAmt),0),0)) but I get a #VALUE! error
I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=AVERAGEIFS(A1:A1000;A1:C1000;"0";A1:A1000;"A1001") into range of cells so the changes relatively to its position e.g. in column B it will look like this
=AVERAGEIFS(B1:B1000;B1:C1000;"0";B1:B1000;"B1001") The macro I recorded will paste formula where I need, but all references remain the same. What should I do to make them change?
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB" (2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB". (3) then automatically run a recorded macro named "BoldFirstName"
I am working on a Budgeting worksheet. I want to use UserForms as one method of Data entry. I would like to provide users with an input box that would prompt for a start and end date, then the category they are forecasting, and finally the quantity and price by day of the week. Is it possible to paste a 7 day set of data into a 10 (or more or less) day range? For example if the dates entered were for Jan 1 through Jan 10 this would repeat 3 of the days entered. I have attached a sample, not useing UserForm, to better illistrate what I am trying to achieve.
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB: Private Sub Worksheet_Change(ByVal Target As Range) Dim nextRow As Long If Target.Column = 11 And Target.Cells.Count = 1 Then
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
I need a macro that will copy a selected range from an existing worksheet in a workbook and paste the data to the last row in another workbook on a particular worksheet.
I have tried using the below mentioned macro. However, it only work on one cell. I need to copy and paste a range from A1:Q200.
Sub retrievedata() Dim wbResult As Workbook, wbSource As Workbook, CopyRng As Range, Dest As Range Dim FileName As String, Filt As String Set wbResult = ThisWorkbook Set Dest = wbResult. Sheets("Data").Range("A1:Q200") Application. ScreenUpdating = False Application.DisplayAlerts = False Filt = "All Files (*.*),*.*" FileName = Application. GetOpenFilename(Filt) Set wbSource = Workbooks.Open(FileName) Set CopyRng = wbSource.Sheets("Summary").Range("A1:Q200") Dest = CopyRng Application.ScreenUpdating = True Application.DisplayAlerts = True wbResult.Activate wbSource.Close End Sub
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
I previously posted a problem related to copying data from one sheet and paste it in another workbook when "Delivered" is chosen from a drop down menu. Everything works fine with my dummy files, but a problem comes up when I try to incorporate this code into the original file.
The issue is that once the code copies the info from the range A3:D3 it has to paste it into different cells in the other workbook.
Please see the attached file to see where I need the data from the range A3:D3 to be pasted.
Ive been trying to find out how i can paste information in the next available column but between certain columns. Here is an example of what im trying to do. There is a calculator which represents 3 machines. It runs different senerios if you change the % of product going into it (cells to change this are light blue). What im trying to do is take the information the machine outputs to the right and organize it on the next worksheet.
The data on the next worksheet is a combination of all the machines performance (in yellow) together and the machines personal performance (in red). when the button is pushed currently, I have the overall scenerios information filling down rows. What I would also like it to do is see if im using a machine (because it can be turned off by changing the usage to 0%), and if I am, copy the results form the individual machine to the next worksheet. When it copies it needs to see if the first machine slot is open and if not the second and paste in the available location. I cant have a specific spot for each machine on the real worksheet cause there are maybe 100 machines and if 15 are used I only want the first 15 machine info slots filled and im gonna hide the rest of the columns. The way the columns fill also cant be like the rows where it looks for next available free spot. It has to only be for the specific range in red because there is info to the right of where this is going.
Sub Send_Data() Sheets("Calculator Sheet").Select Range("AD9, AE9, AG9").Copy Sheets("output sheet").Select Range("B65536").End(xlUp).Select ActiveCell.Offset(1, 0).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.
know while doing paste special whether we can copy the data in reverse manner instead of regular pattern. Here, I would like to explain my query in detail.
As you all aware that we use paste special command for multipurpose requirements such as breaking the links/transpose etc. But, here I need to copy the data from last row figure as first in the same context first one as final.
Ex: if Data is 123456 and if we paste the data by using paste special, data will be same may be in in row /column. Here, I wanted to copy the data as 654311 which means reverse. Hence, kindly guide me whether is there any command/formula for doing the same.
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
I'm looking to build a football data sheet on matches played with a column that adds up the last 3 match goals for the team in that row. I've only managed to get as far as adding up all goals for a team in a static date range using SUMIF. I imagine this is more complex and requires some kind of changing sum range that's relative to the cell I'm in.
I'm intermediate at best so any array formulas and VB script would preferred to be avoided if possible.
in the watered down example below, I'd like to add up all home team goals for Hereford in the last 3 matches, therefore excluding the game on the 10th (row 1) giving a total of 5. I'd like this formula to copy down from a13 to future matches and therefore update. So the next week's match will add goals for hereford from e13,e11,e8 but exclude e2, e5. Yes you've guessed it... I'm trying to work out recent team form to predict match outcomes for financial gain...
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
I have come across this SUMIF formula which sum a range and ignoring errors produced by formulas in the range, I can't figure out how this works and need the expertise of the Excel experts here. =SUMIF(A2:A9,"<1E100"). What does "<1E100" represent and how its work
