I have a report that I want the total amount (in the bottom right corner, but can vary in row number) to appear in a particular cell in the header. In the macro, I selected the cell & entered "=CTRL+End". It works in reality, but not in a macro. It returns a visual of 0.00, but "=XFB1048565" in the formular bar. How can I get the header cell to return the correct total amount?
View 3 RepliesLocated in column W are amounts. if this amount is les than or equal to zero, I want to look at column A to see what account number is associated with that amount. then delete any row with that account number and also any empty row that may be directly above it.
I am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?
View 9 Replies View RelatedIn a financial environment we have a calculator which uses iteration to allow for a cost being added to loan amount where the cost is based on the total loan amount. Iteration is set to 100 iterations with max change .001
On one PC the first time the calculator is opened it gives a particular (incorrect) result. If the input cells are cleared and the data re-entered, it gives the correct result. This only happens on one particular PC. Is there some other setting , other than the iteration setting, that would cause this?
I have contarct for amount $5000 with a start date of 1/1/2014 - 3/31/2014 (3 months). I would like to equally split my amount based on my number of months between 1/1/2014 and 3/31/2014 ie $1666.66/per month.
View 4 Replies View RelatedI want to sum income of my team by name without sort.
Example: I have as beloow in excel:
$ 10.91 Khear
$ 10.91 Khear
$ 10.91 Vichda $ 22.73 Linda $ 31.82 Linda $ 13.64 Vichda $ 10.91 Khear
$ 10.91 Khear
$ 10.91 Linda
$ 13.64 Virak $ 10.91 Khear
So I want to calculate name Linda, how much? Khear How much? without sort or separate for calculate.
I am trying to write a calc for a total an amount based on a list choice
Here is the Set up
Fields A1 thru A255 are number 1 to 255
Fields B1 thru B255 are number 255 to 1
Field C1 is a List box set using A1 to A255 and its list
Field D1 is set as the needed Calculation
When you choose a number in C1 the D1 calculation should total the amount of Fields B* to B1, * being the corrisponding B field to the A field from the list
Example C1=100 (Field A100) D1=Sum of Fields B100 to B1
I have pivot tables where I need to look through a series of names and sum the hours and dollars charged by that person. When I try to do a pivot I can get it to read
column 1 Column 2
John Doe $4000
Mary Smith $ 500
But if I try to add the hour columns it breaks it out by the week the hours was charged
column 1 Column 2 Column 3
John Doe $2000 4
2000 4
Mary Smith $ 250 5
250 5
I want it to just give me one dollar total and one hour total per employee.
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View RelatedI'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
to run a macro that enters a new row after each set of currencies (which have been sorted). I now need to enter a total balance cell within this empty row which calculates the total amount for each currency.
I need to do this using the SUMIF function below:
SUMIF($J$3:$J$300,"L/C",$I$3:$I$300)-SUMIF($J$3:$J$300,"L/D",$I$3:$I$300)
the above basically lets me calculate the total but as no - and + signs were input it does this by recognising the 'dr' and 'cr' in the column next to the amount.
I have 2 tables, one with invoices, the other with purchase orders. I would like to have a "PO Amount Remaining" column on the invoice table that looks up the PO listed on the invoice with the PO $ amount on the PO table. Once it is matched, I would like to subtract the total invoices to give me the amount of the PO that is left. Basically I would like the "PO Amount Remaining" column right now to have $4,200 listed in each row for invoices 1 & 2.....
View 18 Replies View RelatedIs there a function, or how would I write a vba to figure out the following.
I have 86 items all with a different price, which come to a total of $348,359.33, is there a way to figure out which combination of the 86 entries will give me a total of $57,673.36
Is there a formula or macro that will identify which cells on a spreadsheet containing various dollar values will add up to a predetermined total? I work in Accounts Receivable and sometimes vendors send in payments for several invoices with no instructions as to the application. I want to be able list the available invoice amounts on a spreadsheet, and be able to tell which of the cells add up to the payment amount.
View 2 Replies View RelatedI need a formula that calculates the total rent amount for particular dates. Example would be a formula that includes a date starting at the first of the month (October 1, 2009 to September 30, 2010) and also would include a date starting at a date later than the first (October 3, 2009 to September 30, 2010). The figures needed would be the monthly rent (ex: $1,000) and a pro rated rent amout for a lease that starts after the first of the month. The pro rated amount would also have to include the years with a leap year. I have been working on this but I know there has to be an easier way.
I receive a large file every month with 30K+ rows of data that need to be manipulated manually before I can send it off. Within the data are "chunks" of data that are anywhere from 1 to 90 rows each. Each chunk needs to total 100 or less, and while they do for the most part, some end up over 100 due to rounding (usually 100.02 or so). The rows above and below each chunk are blank, and I currently have a calc to add each chunk, and flag it if it's over 100. Then, I have to go through each of the flagged chunks and manually decrease one of the lines to make the total 100.
Is there any way to automate any or all of this procedure?
I have attached a sample file with two chunks of data. The actual files contains 14 more columns to the left that aren't shown.
Sample.xlsx
I need to prorate a total dollar amount by a selected number of attendees. How can I do that with code, I know the formula for excel, but how do I put that on my user form so it only does the math as a new entry is submitted? I do not want to have the formula on the spreadsheet which is my report unless there is an entry on the row, which will only be the case when a user completes the user form. I just do not want the div/# error on the sheet visible if at all possible.
View 2 Replies View RelatedIm trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
Is there anyway to use Excel to determine which of a set of numbers equals a total? I encounter this issue when dealing with accounts receivable. We receive payments with no details on what is being paid. I have a list of open items and a total being paid. I would like to have Excel determine which combination of invoices can be added together to match the payment.
View 4 Replies View RelatedI am trying to calculate the total amount of kilos for a specific date with a given time range.
As well as the average time they have been handled with in the same specifications.
Attached is a sample sheet of the info I am working with but I cant seem to get the formulas to work.
Book1.xlsx
I have included my budget so helpers can see it. I am trying creating a formula on mini-dashboard on A8 (Under the total budgeted amount) that will check the total budgeted amount based on the values I enter on the categories sheet. Of course it will be controlled using the drop down menu on A2 on mini-dashboard. I thought I had this working with a sumif function but it seems to have quit working.
View 2 Replies View RelatedIs there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedHow to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I have 3 columns in an excel sheet (ID, Signed by & To be checked), and in another sheet, I have names under a column "Checkers".
I need a macro where in if I run it "To be checked" column in sheet 1 should be equally assigned to the "Checkers" in sheet 2 and the rest should be blanks.
find the below sample:
Before Macro:
ID
Signed by
To be Checked
121
AAA
123
BBB
[code]....
Some time ago I was developing a worksheet with a large amount of code in it, and I got some kind of 'out of memory' error. I seem to remember it turned out that the error was because I had too much vba code in a single worksheet. I think I overcame the problem by moving routines out of the sheet and into a module.
I'm probably going to be approaching this limit again with something I'm wroking on now (although I haven't had any errors yet.) Does anyone know what the maximum amount of code you can have in a single worksheet in Excel 2003 is? And is there an easy way to find out how much code you have in a worksheet?
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
I have the code below in a macro, but cannot figure out how to add the following format to the left and right header:
size 12 Ariel font, Bold and Italic
I cannot seem to get it right!
With ActiveSheet.PageSetup
.LeftMargin = Application.InchesToPoints(0.166)
.RightMargin = Application.InchesToPoints(0.166)
.TopMargin = Application.InchesToPoints(1)
.BottomMargin = Application.InchesToPoints(0.8)
.HeaderMargin = Application.InchesToPoints(0.5)
.FooterMargin = Application.InchesToPoints(0.3)
[code].....
I'm working with a column that contains dates. The dates are pulled from a system that doesnt always have dates in the format
mm/dd/yyyy => 09/26/2014
but instead sometimes
9/26/2014
or
4/7/2014
i.e., 0's are missing.
I'm looking for a macro that inserts these missing 0's
**So I suppose the criteria should be that if the cell is 9 characters long (including the "/"s), then it adds a 0 as first character**
and
***the cells that are only 8 characters, in that case there would have to be insert 0 again as character 1, and 0 as character 4 (if 0 is already added as first)***
I'll attach a file that contains dates : test.xls
I have this VBA code running in cell A1 which gives you a yes/no message box when you try to change the selected cell. I am trying to have the Target.Address = 'Specific Header Cell in Table' but I am not able to develop the code to do so. Here is the code:
[Code] .....
The main reason I have this message box is to prevent the user from changing the cell in the table because the titles in the tables are linked to macros. If they are changed, the macros will not run. Also, I am aware there are codenames for the excel sheets in a workbook. If there are codenames for the header titles in an excel table, I could link my macros to the codenames. As a result, I would not need this macro for the message box.