I have a table showing accesssibility of given fruits in some particular shops. What I need is to list the fruits available in every shop right after the shop's name, but skipping any empty spaces (i.e. unavailable fruits. See the example, it's manually entered though).
View 2 RepliesThis was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies View RelatedI have an excel sheet containing data as given below, wherein we receive certain report from each department on monthly basis and the same is mentioned as received against each month under header column. We need to remind the department about non receipt of report for particular months which contain empty cells. Macro is required to generate the report of empty cells mentioning the months against each department.
Available Data
Dept
Sep-12
[Code]....
I have this example data range:
foo 3
goo 2
blu 5
I'd like to be able to chart this (clustered columns for instance) but when I delete value 2 from goo, I'd like the chart to skip that row altogether and not display "goo" and a blank space as its value. I only want foo and blu columns showing.
Is that possible?
Is there an easy way to revise the following code so that it imports ONLY the non-blank rows from files?
Sub ImportFiles()
Dim i As Integer, files As String, text As String
ChDir _
"C:Test"
Cells.Select
Range("A1").Activate
Selection.ClearContents
'Selection.QueryTable.Delete
Application. ScreenUpdating = False
i = 0
files = Dir("*.csv")
Do While files <> ""
Open files For Input As 1
Do While Not EOF(1)
i = i + 1
Line Input #1, text
Worksheets(1).Cells(i, 1) = text
Loop
I have this table and I want to delete all the table rows that are empty. The problem comes in when I am trying to delete the "Table Row" and not the excel entire row. There is data next to my table and I don't wanna mess it up.
This is the code I managed to put togeter
Code:
Sub Delete_Empty_Rows_Table()
Dim i As Variant
Dim varWorkbook As Workbook
For Each i In varWorkbook
Set i = ListObjects.ListRows.Count
[code].....
i have table in the left side and i want to get the results in the table in the right side skipping blanks row price with taking in consideration blanks are formula contain ""
[IMG][/IMG]
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
I'm currently looking to develop a few formulas that can review individual lines in a table, identify specific values, associate a tag for that value, and then count the number of instances the unique value occurs.
I've had sucess with VLOOKUP and COUNT IF for the back end but don't know where to start on the front end.
In addition I'm unsure whether this is better suited to a Macro since the number of rows created will vary with the data table/array being reviewed.
I have a spreadsheet similar to this:
Name........Cat....Dog....Fish....Mouse
NY............Cat.....Dog....Fish..........
NY............Cat...............Fish....Mouse
DC.....................Dog..............Mouse
DC...............................Fish............
CA ...........Cat................................
I want to create a pivot table to do this:
Name.........Cat....Dog....Fish....Mouse
NY...............2.......1.........2........1..
DC...............1......1..........1............
CA ...............1.............................
I have been unable to get it formatted correctly. The closest I get are "sub-colums" with counts.
I need to figure out how to tell if the sheet is empty with the exception of the header row that resides in Row 1. I have looked though the archieves, tried about 10 - 15 possible solutions, only for one thing or another to go wrong.
What this does is, if the data sheet is empty except the header, I need it to report that the user must add data. I have it checking row 1 column 1 but thats the header, and row 2 column 1 may or maynot contain data..
So if row two is empty then report that the sheet is empty, sans the header.
Sheet name = Data
Row 1 has header
Row 2 competely empty?
I have a set of data that I'm trying to identify the unique values in a column and then sum the related quantites against each of those values:
View 14 Replies View RelatedIs there any code or way to generate the compete list of fields that are selectable from the " PivotTable Field list"?
I have various cubes I need to check and compile the list of fields for each.
I have a table listing certain values (Column C) and their respective probabilities, based on normal distribution (Column D). As these probabilities are dependant only on values from Column C, I'd like to list all the values from that column into another fragment of the sheet, say F6 and below, but each value should appear there only once, no matter how often it occurs in its original Column C (I listed them manually in Column F in the enclosed example). Moreover, if a new value appears in Column C, it should be also included in the new place and sorted in increasing order.
View 7 Replies View RelatedI am trying to concatenate entries into one cell so that when uploaded, the comma-separated contents will be treated as tags. copperberry sample file.xlsxSee attached sample file. Wherever there is a 1 in a row, I want to take the column header text above that 1 and concatenate it with subsequent text in the cell at the end of the row. See sample end result in cell J2. I assume I need an IF statement, but I'm not sure how to phrase it to collect all the concatenations needed. There are 200+ rows.
copperberry
Windows 8.1
Excel 2013
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedI need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
input:
blank 3-x Blank 1-y blank 2-z 1-k
output:
1-k 1-x 2-z 3-y
I want for my set of data. The attached .xls is pretty straight forward: the first column is a list of people (identified by their customer number) and the second column is the URL they visited.
Since many people went to multiple pages, there are dupes between the two columns, but all of the rows are unique. What i am looking for is a table that shows as a header the URL (just one) and then the list of people that went to that URL under the header. So it's really just one column of information. It seems like a perfect task for a pivot table.
creating a formula that will automatically bring the cursor to the next applicable cell. We have template wherein there are extra cells in between those that we fill out. What I wanted to happen is for the cursor to go directly to the next cell that I need to fill up.
Example would be that cell a1 is where we type the name then the next cell will be c1where we will put the addreas. How will I make the cursor jump to c1 when ive filled in a1.
I'm looking to easily drag the sum of certain cells in a different column BUT keeping a specific range, it's hard to explain so i'll show an example...
A1
A2
A3
A4
A5
A6
A7
A8
B1=SUM(A1:A4)
B2=SUM(A4:A7)
B3=SUM(A8:A11)
And so on...
Is there any way I can do this by dragging down the cell formula from B1 and it remembering the range of 4, so I don't have to manually select each range...?
I'm trying to total up some rows that are put in a repetitive order repeat. I can do this, but the method I'm using is highly inefficient. Is there some slick equation I don't know about?
Example below:
Worker 1 - Double Time - each of these has 200 columns for different job codes
Worker 1 - Over Time
Worker 1 - Regular Time
Worker 2 - Double Time
Worker 2 - Over Time
Worker 2 - Regular Time
Worker 3 - Double Time
Worker 3 - Over Time
Worker 3 - Regular Time
...and so on to 1000 workers
Total Double Time - for each job code
Total Over Time
Total Regular Time
I was working on a project this morning (I actually got help here but this is more or less unrelated) and ran into a strange problem. It seems the For loop that I was using is skipping cells.
Was trying to figure out the problem using this macro and a list or random garbage.
Private Sub CommandButton1_Click()
Dim number As Integer
For Each Cell In Range("A2:A500")
number = WorksheetFunction.CountIf(Range("A:A"), Cell.Value)
Cell.Offset(0, 1).Value = number
If number > 1 Then
Cell.EntireRow.Delete
End If
number = 0
Next Cell
End Sub
Maybe someone who actually know something about programming can straighten me out.
I have a list of items (TR Sets) from 1 to 96 in the range B4:B99, with values corresponding to each one (Acid Number) in the range C4:C99. I would like to make a separate list that names each TR Set (using numbers 1-96) that has an Acid Number > 0.1 . Is there a formula to do this?
View 13 Replies View RelatedAttached is a sample spreadsheet. Please look at the spreadsheet will reading this post, as it would be rather confusing otherwise.
From this spreadsheet, I need to create two new spreadsheets (I assume one at a time is best). One (S1) will contain data from rows where Column C = "Regular Hours". The other (S2) will contain data from rows where Column C <> "Regular Hours".
The format of S1 (3 columns) is: Payroll # (Column B), code for the type of hour (this code I will need to write into the VBA code), the number of hours (D:G,Q:T,AD:AG), and the constant "N".
The format of S2 (4 columns) is: Payroll # (Column B), code for the type of expense (this code I will need to write into the VBA code), the dollar amount (I:P,V:AC, AI:AP), the project (Column C), and the constant "N".
The trick is each row on the new spreadsheets can only contain one hour/expense (otherwise this would be easy!). So, I need to loop to copy/paste the right cells, and need to skip over blanks, and need to end at column AP, then continue to the next appropriate row. As well, columns H, U, and AH are not used on the new sheets. I have another spreadsheet slightly similar to this with looping, but it is a delete type loop, not a creation one, and it doesn't have to have seperate rows like this does. I know this one is a bit big, but I know someone out there can figure out some looping code that can handle this.
I have a list of names in column B and either a 1 or 0 in column A as below:
0 A B
1 1 Bob
2 0 Chan
3 0 Lucy
4 1 Billy
On another worksheet I want to be able to list only the names with a 1 in column A. This must be done in another worksheet so I have something like below.
0 A
1 Bob
2 Billy
3
4
Let's say My criteria is :
1 2 3 4 5 6 7 8 9 10 J Q K A (13 ranks of cards)
s c d h (4 different suits...s=spades c = clubs,etc)
5 would be the number of draws of 1 card to make a poker hand
How would I go about listing the 2, 598, 960 different poker hands in separate cells?
Say I have a listing of cells
1,8,57,77,100, 104
I have a number I would like to find that is made up of a number of these cells. Lets say that number is 205, and as such the only possible values that could make that total are 1,100, and 104.
Is there a formula I can run that will allow me to find this number without manually figuring it out.
My merged cells are not purely aesthetical - each merged cell (covering 6 rows in total, beginning at A3:A8) has colums and rows to the right for other details/formulae relating to that specific merged cell (which contains a customer account name).
The list I'm trying to reference is on a seperate tab - 'Projects' starting in cell A4. This list will have project names added to it, so I need my merged cells to reference the list, and subsequently pulling through all new additions to the list, rather than having to add them on a 2nd time.