Show Message Box If Cell Contents Changed
Nov 2, 2012
What i am trying to do:
1) check whether any value in column J, rows 7-18 is changed,
2) check whether the value is above the value in col H, respective row multiplied by 1,25,
3) if point 3 true, clear the contents of cells E24, F24, and show up a messagebox,
4) run another macro by pressing button in cell C24 in order to fill the E24 and F24 cells again.
What happens: Points 1-3 work perfectly well, but then i have a problem in point 4 - the messagebox of point 3 appears again and the work of macro of point 4 interrupts showing an "Application-defined or object-defined error".
The file with the code is attached : Example.xlsm
View 3 Replies
ADVERTISEMENT
May 16, 2006
In a range of cells (e.g. B26-B40) I have names (first name and second name or first initial and second name). This data is carried from sheet 1 to the second sheet via formula. Some cells may be blank as well.
A VB code to display a message when the user changes the name in any of these cells with data or adds a new name to a cell that is blank, in sheet2
View 3 Replies
View Related
Oct 7, 2006
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies
View Related
Nov 19, 2012
I am new to excel vba. I want to show a pop-up message when user tries to save the workbook keeping cell(1,3) blank.
View 1 Replies
View Related
Feb 19, 2009
This seems like a very simple question but I can't find the answer that I'm looking for. I have a spreadsheet with a drop-down ( validation) list. Based on what the person selects, I then would like to have a message box to come that would direct them that certain cells then need to be filled in.
View 4 Replies
View Related
Jun 26, 2012
I am trying to assigned the values of two adjacent cell in a msgbox (columns AE and AF) as it is to far away for me to scroll and hiding the other columns will cause me to unhid it when I need to enter some information on it.
What I want to do, is when I double click activecell in column B, msgbox will pop and tell me the values nested in the same row under columns AE and AF (contract start date is : in column AE, contract end date : in column AF)
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
MsgBox "Contract Start Date" & ActiveCell.Row.Offset(0, 30).Value & "Contract Start Date" & ActiveCell.Row.Offset(0, 31).Value
End Sub
View 2 Replies
View Related
Aug 18, 2014
I have this VBA code running in cell A1 which gives you a yes/no message box when you try to change the selected cell. I am trying to have the Target.Address = 'Specific Header Cell in Table' but I am not able to develop the code to do so. Here is the code:
[Code] .....
The main reason I have this message box is to prevent the user from changing the cell in the table because the titles in the tables are linked to macros. If they are changed, the macros will not run. Also, I am aware there are codenames for the excel sheets in a workbook. If there are codenames for the header titles in an excel table, I could link my macros to the codenames. As a result, I would not need this macro for the message box.
View 2 Replies
View Related
Oct 1, 2008
I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.
My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.
Here is the code I presently have for this part of my macro.
Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")
If strFind = vbNullString Then Exit Sub
With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else
View 9 Replies
View Related
Oct 7, 2008
If there is more data in a cell than can be displayed due to the size of the cell, is there a way to get a real-time preview of all the contents in the cell just by hovering over or clicking on the cell?
View 2 Replies
View Related
Jun 28, 2012
I have a column of dates in column E1:E100.
E1 = 25/06/2012
E2 = 02/07/2012
E3 = 09/07/2012
etc.
In column F1:F100 I will insert "Y" in the one of the blank cells next to one of the date cells in column E1:E100.
In cell B1 I want to reference where the cell in column F is "Y" then use respective date in column E.
e.g.
If i have "Y" in cell F1 then in B1 I want to show E1 (25/06/2012).
If i have "Y" in cell F2 then in B1 I want to show E2 (02/07/2012).
If i have "Y" in cell F3 then in B1 I want to show E3 (09/07/2012).
etc.
View 3 Replies
View Related
May 13, 2009
I want to show which rows of data have been changed by incrementing a revision attribute. For example, if a user changes the contents of a cell anywhere between rows 2 and 13 and col 1 and 9 then the revision attribute in col 10 would increment from 1 to 2 (for the affected row). If another change affects the same row then the rev attribute would increment to 3, and so forth. I don't care which cell was changed only that something on that row was touched.
I thought the CHANGE event was a dead ringer for triggering some VBA code to control this but, since part of the change event code writes the revision value, this triggers another CHANGE event causing an endless loop until something (??) kicks in and stops it after 220 iterations. Is there a way to inhibit the change event just prior to updating the cell containing the version attribute?
Rather than post the code here I have submitted the workbook that includes the whole setup and code. I should also mention I looked at all the other worksheet events and I do not see any "triggers" that would fire each time a cell content is changed. As a side note, is there a way to step into the code of a change event? F8 does nothing.
View 3 Replies
View Related
Dec 6, 2009
I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 Replies
View Related
Jan 11, 2009
What is the simplest way to display a "Please Wait.." message during the execution of a macro.
Tried the WshShell.Popup but did not work.
View 10 Replies
View Related
Dec 9, 2009
we are having a excel sheet which has data in it.
ex:
In sheet3:
D |F
Columns: Logic |Field
Rows: market |business
proposed |consumer
In sheet2:
A |B
List of sheet | Field
sheet3 |business
sheet4 |other
In Sheet1:
A |B
List of sheet |Field
sheet3 |consumer
When a user points to the particular cell(f2,f3) in column F of sheet3, it should display a message weather the data in particular cell is in which sheet( Sheet1 or sheet2 or not specified) and hyperlink must be displayed. when we click on the hyperlink it should go to the data particular row of the sheet.(Sheet1 or sheet2)..
View 11 Replies
View Related
May 27, 2009
I need to refer the LAST ROW OF COLUMN "D" to appear in the message box for the below code along with " Receipt number" which is in Sheet2.
Sub saveit()
With Sheets(2)
r = .Range("B65536").End(xlUp).Row + 1
InvN = Cells(15, 4).Text
If Range("c18") = "" Or Range("c20") = "" Or Range("c20") = "" Or Range("c24") = "" Then
MsgBox "Please fill all required fields", vbCritical, " Missing data"
Exit Sub
End If...............................
View 9 Replies
View Related
Nov 16, 2006
Is it possible to display a dialog box or msgbox that doesnt have an OK button ?
i.e I want a message that comes up on the screen that says "Links Updating...Please Wait" which then automatically changes to "Links Sucessfully Updated" on completion...I dont want the macro to be interrupted by the msgbox/dialog....
View 7 Replies
View Related
Aug 28, 2007
I have a spreadsheet where I have input all of my technicians service calls and installations.
In Column C Row 5 and up to the max I assume because I'm not sure how many rows I would use in a year, I have an estimated completion date.
In Column D and the same Rows as above I will input the Actual Completion date.
What I want is if the current date is past the estimated completion date (Column C) and there is no date entered in the Actual Completion date (Column D) I would like a MsgBox to pop up saying "Please enter a new completion date on row _"
"_" would be which ever row the estimated completion date has expired without an actual completion date being entered.
View 9 Replies
View Related
Apr 2, 2014
I am close to finishing making up an Excel tool that takes data input from the user, does some analysis, accepts further input then prepares a report. My coding skills are not what you would call high level, so my code could probably be more efficient, but it works (well, except for this issue).
The tool opens a main multipage userform for data entry, then allows the user to view the data in the spreadsheet tables with the ability to call separate userforms to modify, delete or add records. The user then calls another userform to do some calculations and enter the appropriate results from a separate piece of software, then presses a button to prepare a report. All userforms are called from buttons in a separate userform (I'm not proficient enough and haven't had enough time to create a new ribbon in excel). At various times, messageboxes are used to convey information or prompt the user to do something - these are all simple ones with either only OK button, or OK and cancel buttons.
My problem is that when userforms are called, they sometimes appear but are totally blank (white) - see image.
blank_form.jpg
Clicking anywhere on the screen or pressing any key will bring them up properly and they seem to function normally thereafter.
In addition, the messageboxes sometimes do not appear - pressing any key will make them do so. Other than this they function normally.
The frustrating thing is that these problems occur inconsistently. I can add or change some code and it stops happening, then after testing (entering data and using the tool) starts happening again. Sometimes it just stops happening with no apparent reason, but starts again later after fixing some code or just entering some data. Not all userforms are affected at any one time and not all messageboxes have the problem at any one time.
The problem seems to occur in those subroutines where I access or manipulate data from other sheets before showing the userform or message box (but in most instances, I need to do this manipulation in order to present the correct information in the userform).
Some thought processes I have had, and unsuccessfully tried to fix the problem with (some coming from various web forums):
I thought I may have done "Application.ScreenUpdating = False" without resetting it to true, so I commented out all the "Application.ScreenUpdating = False" statements - problem stopped for a bit then started again.
Some of the userforms were modal, and even though they were not showing were still loaded so thought that this may be impacting on other userforms/message boxes, so changed all userforms to non modal - still had the problem when I opened the tool again.
Tried using "RePaint" and "DoEvents" at various points in the code after opening a userform or message box - no change.
I have tried exporting a form and its code, removing from the tool, then re-importing it. No success.
Tried the tool on another computer and the same problem occurred.
View 10 Replies
View Related
Jul 29, 2014
How to show via a message box the difference between rows 2 and 3 on a worksheet (row 1 is headers).
In the message box per the attached workbook, i should only see something like the following....
Drawing Rev was A is now B
Planner was Joe is now Fred
The attached example is abbreviated, the actual data will span multiple columns (approx. 30 - 40)
View 7 Replies
View Related
Aug 31, 2006
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
View 5 Replies
View Related
Oct 23, 2003
Can I do something so my pivot table shows Manager name in all appropriate cells (eg. agomes is A3:A4 and bschaefe in cells B5:B13)? ........
View 9 Replies
View Related
May 2, 2012
I need a macro where user choose a value from validation, automatically lock the other cells and should show an error message.
Here is what I am looking for. User will choose Yes or no from cell H15 validation. If user choose "NO" from the validation then all other cells has to be locked in the workbook automatically except Cell H15 and a msg box needs to appear stating: "Select Yes from the validation".
View 3 Replies
View Related
Aug 18, 2006
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
View 7 Replies
View Related
Aug 27, 2007
Below is a macro I recorded to help copy 'Paste Special - values only' data between two spreadsheets that have different colour and conditional formatting in cells.
However, if this is run and there is no data to paste, it throws up the End and Debug error.
Any chance that someone knows that if there is no data sitting on the Clipboard, then a msg box would appear saying "Please select the data you require to be copied" in the message box.
Sub data_input()
ActiveSheet. Unprotect
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B5:AG4804").Select
Selection.sort Key1:=Range("B5"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("B5").Select
ActiveSheet.Protect
End Sub
View 4 Replies
View Related
May 17, 2008
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
Jan 22, 2008
I have the following code to compare two columns and delete adjacent rows if 1 is greater than or equal the other...
Sub LastReceipt_GT_Confirmed()
Dim intLstRow As Integer
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1
With Range("E" & intLstRow)
If .Value > .Offset(0, 1).Value Then .EntireRow.Delete
End With
Next intLstRow
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1 .............
View 9 Replies
View Related
Dec 30, 2013
I have attached a workbook stating my problem.
file1.xlsx
View 10 Replies
View Related
Mar 12, 2014
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies
View Related
Dec 30, 2009
If the value of any cell in in column D is changed to "Closed", a message box will appear that says "Others must be notified when item is closed". In that message box, I want two buttons: Button 1 One is cancel and will undo the change. Button 2 will open MS Outlook with pre-filled email addresses and will attach the open worksheet. After the email is sent, to return to Excel.
View 4 Replies
View Related
Jul 26, 2007
I have the following code on my worksheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B2")) Is Nothing Then
Do_it
End If
End Sub
Cell B2 contains an employee number. What I need to do is save some data for the employee number that was in cell B2 just before it was changed.
Example: If employee number "10" is entered in B2.
Then the user were to change the employee number in cell B2 to "55" I would like to use the previous value "10" to do some VBA stuff with.
View 5 Replies
View Related
