Running A Sub From A Cell Change

Sep 9, 2008

I am having grief trying to get a sub from a Module to run when a single cell on a worksheet changes.
The code I have at present is:

Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("p4")) Is Nothing Then

wksheet = Name
vbgraph wksheet

End If
End Sub

View 9 Replies


ADVERTISEMENT

Running Macro On Cell Change?

Jul 31, 2014

I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.

Working code:

[Code]....

Non working Code:

[Code] .........

I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.

View 3 Replies View Related

VBA - Macro Running On Cell Change

Apr 17, 2012

I have following macro run when the given cell changes:

HTML Code:

Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range

[Code]...

It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...

View 1 Replies View Related

Running Two Worksheet Change Scripts Gives Error

Jun 11, 2009

Running Two Worksheet Change Scripts Gives Error
I need to run two VBA scripts on the sheet1 tab:

View 2 Replies View Related

Running Macro When Change Made To Worksheet

Feb 16, 2012

The intent of the code below is to run the marco HideCol when a change is made in cell C10. If I actually change the value in C10 it works. However, I have C10 linked to another worksheet (=anotherpage!A13). When the value changes, my macro is not executing.

Here is the code:

Private Sub Worksheet_Change(ByVal Target As Range)
Dim changed As Range
Set changed = Range("C10")
If Not Intersect(Target, changed) Is Nothing Then
HideCol
End If
End Sub

View 3 Replies View Related

Code To Stop A Worksheet Selection Change Macro Running

Aug 17, 2009

I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.

Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?

View 6 Replies View Related

Prevent Combobox Change Running Other Control Event Procedures

May 17, 2008

I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.

View 8 Replies View Related

Running Total In Cell Based Upon New Number Being Entered Into Different Cell

Apr 10, 2014

I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.

Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)

Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)

Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.

Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.

So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.

Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.

Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)

So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.

Key Inventory - Test.xlsx

View 14 Replies View Related

Running Count Of Cell Changes

Apr 15, 2009

I am trying to get my Excel Worksheet to count the times that a cell changes. The data is in Column C, and I want to enter it in column H. For example. If Currently, the count in C1 is 5, but changes to 4, H1 should read one, then the next day, if I change the value from 4 to 7, H1 should read 2, and so forth and so forth. I am counting the amount of changes to a cell.

I want it going the length of the column, but for each cell, like C2 lines up with H2 and so forth. I have looked everywhere for a particular Macro, but am having a hard time finding one.

View 14 Replies View Related

Running Macro From A Cell

Jul 23, 2014

I am trying to utilise a vba script for DNS resolution which i got from Followup: DNS Lookup and Ping in Excel - CodeProject

I have a list of IP addresses that I want to use this on, however if I test this by using the test instructions, excel does nothing, its just text in a cell, so I would like to know how would this procedure get called from the spreadsheet?

Code:

GetHostname("4.2.2.1") in any Excel cell.

or

Use: GetIpAddress("www.google.com") in any Excel cell.

View 3 Replies View Related

Running 20 Day Cell Value Archiving

Nov 27, 2007

I want to store 20 days of stock information for any given stock in 20 cells. Cell 20 will be 20 days into the past from today. Cell 0 would be today and would be the value that updates (let's say the price) using the stockquote msn add in.

I want cell 20 to be cell 19's value tomorrow, cell 19 to be cell 18's value tomorrow, and so on. So essentially, everyday I open it, cell 20's value gets trashed, and all the values become one day older, effectively having a 20 day tracking of a particular stock. I want to also make sure that if I update day 0 or (today())'s value, that today()-1, etc.. doens't change just because today() was updated. There has to be a change in the date for that to happen, so referencing a static cell that contains today() will most likely be useful.

View 9 Replies View Related

Worksheet Change To Function To Add Text To Cell Which Initially Triggered Change

Jan 10, 2014

i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.

The existing code i have is:

Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"

[code].....

I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?

View 3 Replies View Related

Cell To Calculate Running Total

Oct 18, 2006

Basically, I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.

Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.

In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.

View 9 Replies View Related

Macro Only Running One Cell At A Time

Mar 25, 2014

I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?

View 11 Replies View Related

Creating A Cell With Running Time

Oct 2, 2007

Create a cell with running time in Hours, Minutes, and seconds, in 12:00:00 AM format.

View 13 Replies View Related

Running Macro After Typing Into A Cell?

Mar 23, 2012

Is it possible to have a macro run as soon as there is text typed into cell A2? Basically, I have a form that needs to be filled out, but somehow, users forget to put their name in the box. So I don't want any information to be able to be typed in until a name is entered.

View 9 Replies View Related

Prevent Macro From Running If Cell Is Red

Apr 29, 2008

I have a macro that is run by clicking on a macro button. The macro copies the data from Sheet1 and pastes it in another sheet, Sheet2. I added some conditional formatting that colors certain cells red if others are blank on Sheet1. I would like to add some code to my macro that will not allow it to copy and paste from sheet1 to sheet2 if there are any red cells in the range.

View 9 Replies View Related

Check Cell Before Running Macro

Feb 16, 2010

I need to check cell G5 (which is G4-G3) before running a macro. if G5 is zero i need to pop up a message to inform the user to enter data in cells G3 & G4. And if G5 is greater than Zero the macro shud run.

View 10 Replies View Related

Running A Program Command Within A Cell

Jun 8, 2006

This is the command I want to run from a cell:

c:windowssystem32mstsc.exe /v :<servername>

This will allow me to click on a servername in a column and RDC into it.

View 9 Replies View Related

Keep Running Total In A Single Cell

Sep 13, 2006

I would like to sum the values entered into A1 each time i enter a new value into A1 and to place the grand total, of all values entered, into A3 ? This is as long as the sheet1 is activated ?

i tried with Event (Change/Selection change), but could not get a result......................

View 3 Replies View Related

Cell To Calculate A Running Total

Oct 18, 2006

I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.

Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.

In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.

View 9 Replies View Related

Event Change To Change The Sheet Name Based On A Cell Value

Jul 21, 2009

Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far

Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub

View 9 Replies View Related

Change Cell Address In Formula On Cell Value Change

Mar 25, 2013

I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.

=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)

For example if A3 is having value AZ i need the formula changed automatically as below

=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)

View 4 Replies View Related

Running Total Formula In Single Cell?

Mar 28, 2014

I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.

Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number) Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)

Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.

Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.

Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.

View 5 Replies View Related

Running Clock In Excel Cell Directly

Jul 17, 2014

How we can put a running clock in Excel Cell directly .

View 2 Replies View Related

How To Setup Running Number In Single Cell

Oct 22, 2012

example, in sheet1, B12.

already have workbook already coded. which in sheet1 is just a table to record transaction into other sheets. after clicking "keep" button (this 'keep' button already customized/coded) it will updating the particular chosen sheet.

i would like to make a running number in sheet1, b12, and right after clicking the "keep" button it will generate a new number. example if i want the running number start as 6500, i will become 6501 after click the "keep" button

View 1 Replies View Related

Keeping A Running Total In A Single Cell

Aug 22, 2006

Is it possible to have numbers added to the same cell and have excel continue to calculate the addition for me in that same cell......ex: I have the number 8 in cell d2 and I want to add the number 8 to that cell and have excel add the 8 to the previous 8 for a total of 16 in the same cell.....the next time I would add 5, and the total would be 21? Can this be done in a single cell?

View 10 Replies View Related

Running A Userform To Update The Current Cell Value

Apr 13, 2008

I have to append the cell value with a user input string in to the same cell.
i.e, if the user types "Issue" in the cells ranging C1:C200, I would like to make a mandatory issue description to be entered by the user. So a user form with text box and command button was introduced which should append the cell value with the user input in the text box.

The issue that I have is with the cell selection within the code for the form.

ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"

For example if the user tabs out from cell C3, the output from the userform will be written to D3 ? or if the user hits Enter key to come out, the output will be written to C4 and so on.
How can I make ure the output is going to the same cell?

Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Application.Intersect(Target, Range("$C$1:$C$200")) = "Issue" Then

Dim MyForm As New UserForm1
MyForm.Show

Else

Exit Sub

End If

End Sub

'Code for the userform is below:

Private Sub CommandButton1_Click()
If TextBox1.Text = "" Then

' the user input is mandatory
MsgBox "Issue Details is mandatory", vbCritical, "Mandatory Field"
TextBox1.SetFocus

Else

' append the cell value with user input in the text box
'****issue is here in the next line
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
Hide

End If
End Sub

View 9 Replies View Related

Running Totals In A Single Cell- Macro

Feb 2, 2009

I have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page


Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
Else
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub

As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this


If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then

I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?

View 9 Replies View Related

Return To Initial Cell After Running Macro

Oct 24, 2007

I've a workbook with 3 tabs with names "tab1, tab2, difference" and I've a macro that calculates tab1-tab2 and puts the results in tab "difference" This macro runs every time I open the workbook or every time dataset is refreshed on any tab.
everything works great but i've following issue.

let's say my cursor is in tab2 & i refresh/update dataset on tab2 which will trigger macro to update values in tab "difference".. this is good. but, soon after macro runs & updates tab "difference", cursor is no more in tab2 but in tab "difference" this is OK if I've 1 or 2 or few tabs but i've 25 tabs & the user has to go back to the initial tab everytime dataset is updated on any tab. Is there a way for the macro to recognize where the cursor initiallly was & run the macro & place the cursor back to the initial tab?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved