I would like to sum the values of a range using something similar to vlookup. The problem with using vlookup is that vlookup returns only the first instance. I have multiple values therefore vlookup would not work. I have 2 variables which is causing my frustration. I have added an example to explain. On the column where it says "correct answer" is where the formula should go. I displayed what the formula should produce so that it explains what I want as the output. The "static column" which contains variables 1 and 2 doesn't change.
The two variables it needs to search for is shown in the variable 1 and variable 2 columns. And the lookup range is on the left.
So basically it needs to match the two variables in the range and then grab the sum of ALL quantities where the two variables match . quantity amount is found on the leftmost column.
Is this possible. sumif works but only with 1 variable.
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese John Chinese - Simplified John Korean Martin Arabic Martin Chinese - Simplified Martin Russian Ramon Arabic Ramon Russian Sam Arabic Sam Chinese- Traditional
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
I have created a sheet that contains a new diet program, calculated down to the precise calorie required for my training routine. Please see below for an example of one of my daily meals:
[url]
I need a formula that will help me to create a weekly shopping list (as the values in the example above will change on a regular basis). So I need to take all values from the from columns A & B, multiply them by 5 and then show me the totals in another sheet.
Similarly, I need to do the same with columns E & F, only they need to be multiplied by 2. The totals then need to be added to give me the required amount (in grams) for the week.
I have attached the file, in the last sheet (Consolidated) i need to get the data from all the previous sheets, my problem is that whenever i have similar cells the data that is showing is only the first value and not the sum of all values,
I have one sheet that contains data about products, the product number, the class it belongs to, and many other bits. The data is sorted by product number.
In a second sheet I have a list of classes in column G, I'd like to return a list of product numbers in columns H to wherever is needed.
For example there might be two products in class one, class one is in G1, with the first product number in H1 and the second in H2.
i am looking to create a vlookup but with the ability to easily change the column number index so that i can use different columns.
As an example. In a worksheet i have a table with the names of cars in column A starting row 3. Column B to m Row 1 is headed Jan to dec, row 2 same columns is a country name eg UK. Column N to Y row 1 is Jan to Dec again and row 2 of these columns is a diff country say Germany. This repeats for a few more countries. The data within Row 4 for these columns i.e per car is all prices. The table therefore shows the prices of cars per country per month.
I then have a seperate worksheet for each country where the cars are again listed in column A and Jan to Dec is in column b to M but the data is hard coded being the number of cars. I would like to use column N to link to 1 of these months hard coded counts dependant on what month i decide to forecast on. The easy way being that if i wanted to use Jan count number i would link the count for that car type to =b4 etc. Is there an easy way to allow me to change the link should i decide i want Feb ?
The second question is within each countries worksheet i want to bring into column p the countries related car price for a month i select. It may be that the count number differs from the price i select.
I would like to find the value from Sheet2 Column1 in sheet1 Column1 and return value from Sheet1 Column2 and Column3 into Sheet2 Column2 and Column3
And if it doesn't find anything just return Not Found
The problem that a Vlookup is not working for me is because I want it to be the exact text from sheet2 column1 but in sheet1 column 1 it should not be exact as it might have some extra text as seen in the illustration above
I'm trying to create a formula that would check if there are similar values in a row. How should I do this? There are 20 values in a row, and they should all be different (true). If similar values are found, it should give a warning or highlight the two or more cells.
I've search several posts and can't figure this out. Have sheet1 with facility number (A) and Description (B), monthly budgets (C-N) and yearly total at O. Each facility has 400+ GL so the only formula that has come close to working is this one: =INDEX('sheet1'!$O$1:$O$7695,MATCH(1,('sheet1'!$A$1:$A$7695=$D8)*('sheet1'!$B$1:$B$7695=G$5),0))
Basically "O" is the yearly number I want, "A" is the facility number and "B" is the Description (which is text). After searching several posts this one returned a result on the first facility, but returned NA on the rest. Also tried CONCENATE function with A&B in sheet1 which are equal to D10&G5 in sheet2. It returned the wrong information, I was looking for "1506Net Sales" and it returned for "1506Net Income".
I am currently working on a project and encountering this problem with VLOOKUP.
I need to show the result into negative since it is negative on the table i made.
In my this scenario, it gives me this error "#N/A" even if the value is in the table.
Here are the details: 3 columns RANGE Minutes 0.02 0.03
[Code].....
my actual table is upto minutes of +960 and -960 and still planning to go up until +1500/-1500
I have named the table as "TABLE" and the value is on "F3" I am using the command =VLOOKUP(F3,Table,3,TRUE) but if the cell is negative it return positive value how do i change the formula so it return the value to negative if it shoud be negative?
I also attached the file as your reference.
I need this to get the value in minutes if it is within the value in the range.
i have a set of data in which i'm trying to lookup a value from a range of file #'s (ex 100-125) that i have concatenated with a file ID (ex 123456789). as of right now i have to vlookup each individual concatenated number, return the result value in its own column (one for 100, one for 101 and so on..) and then sum all 25 columns to get the final number) is there a way to vlookup the range (ID+100:125) and sum the results?
here's the formula i use for each column starting with 100, A2 representing the file ID, C:O being the array
Column A includes a name Column B includes an age Column C states a division (this is the column that contains the Vlookup function)
Column G is where I have to put a range of ages (for instance, x=<0,>3) Column H is where the division name is.
The idea behind this exercise is to use the Vlookup function in column C to reference column G, and return a value in column H. Here a copy of my formula in column C: =VLOOKUP(B3,$G$3:$H$12,2,TRUE). For instance, if Mike (A) is 16 (B) then he would be in the Midget division (C). C is calculated by comparing column B to G, then returning a value in column H. For some odd reason, I can't get column G to reference an age range, such as 1-5 years old.
I have x coordinates in column 1 with coresponding y coordinates in column 2. From my data of x,y coordinates I want to find points with similar y values. In my data I have defined groups of numbers, i.e. I have a set of numbers with y values around 30 (+-10), then a new group with y values around 60 (+-10), and so on... Sometimes the groups are not totaly separeted, there could be a few points with y values between 30 and 60. These points can be grouped with the closest group of coordinates (30 or 60). Each group of x,y coordinates could be copypasted in the columns to the right (columns 3 and up).
So what I want to do is find a group of coordinates. This group will have at least 40 individual points +-10 from a group mean. The coordinates need to be sorted out from the data and put in seperate columns.
I have a set of data with names in col A, Currency in col B, Amount in Col C. I want to convert all the amounts in NON-USD based on exchange rate I input daily into column D.
How do i search down the row for the next name that is denominated in GBP / YEN etc and keep converting until I dont find any more other currencies in it. I tried to improvise on the finding nth but couldnt get anything out of it. Have attached a spreadsheet.
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)
I need to create two formulas:
1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.
2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
I am trying to do a vlookup function of 2 values but the key lookup column is an approximation.
I have attached a sample data file. Essentially, on Sheet 1 Column M (labeled as EPS), I want to do a vlookup of both Column A and B, and copy the values in Sheet 2 Column K into Column M. The approximate value comes from Column B, the date, as Sheet 1 has all the dates from 2001 and 2008 while Sheet 2 only has 4 dates per year. On sheet 2, the first 2 dates are 10/30/2001 and 2/5/2002. I want the EPS value for 10/30/2001 to stand for all values between 10/30/2001 and 2/5/2002.
The Vlookup function with a True value for the last criterion can do this for a vlookup of 1 variable, but it doesn't work for 2.
look at my Vlookup formula and tell me what I'm doing wrong? I have a drop down menu that contains a list that I want to look up its values (as shown on the 'A' columns), the look up values are in sheet 2.
I have a column in a sheet that has the same data more than once and I'm using a vlookup function to pull that information from the column. However, I don't want to repeat the same information more than once. Is there a way to show an item in vlookup only once.
Here's the scenario:
Column A New York New York LA Washington New York Washington Washington LA New York
I need a macro to calculate the order value i.e when i fill in a qty against any code a macro would execute and get the rate of that code from (rate file worksheet) and multiply that value with the fill in qty and display it and also, when i fill in a qty against another code the macro should perform the same procedure but in this case it would add the value to the last value and show the combined total value for the order,
