I'm trying to complete a SUMIF as well as an AND statement. But I'm running into problems. Attached is my spreadsheet to make it easier to follow. Sheet DB!DK13 is my formula. What it's suppose to get is the average of all Males test scores. I've got the SUMIF formula down, that's not the problem. The problem is it's calculating all the 0's in the range as well which produces inaccurate results.
I'd like to maybe add an AND statement to state if the range ('Old and New Standards'!I:I) is >1 then average the results of just Males. I've also added an IF statement to show a null value if the cell is equal to 0 but I'm not getting why it's still averaging my blank cells.
I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
I'm trying to create a SUMIF statement that that has an embedded OR statement within, and am unable to make it work.
Basically I want to say if "column Q" equals one of 2 criteria ("cat" or "dog") then sum the corresponding number in "column P" I've tried the following statement, but it is just resulting in a zero:
=SUMIF(Q9:Q32792,OR("cat","dog"),P9:P32792)
I've seen support on statements with multiple criteria in DIFFERENT columns, but not if searching for multiple criteria in the SAME column.
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula
I am currently using an Intersect statement in a worksheet module to perform two things: 1. Insert a time stamp into row 2 when row 1 has a price inserted 2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user. If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code: tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code: TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click() Dim Row As Range Dim FinalRow As Long Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range Application.ScreenUpdating = False
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code: Sub testInsert() Dim adoCommand As New ADODB.Command Dim sQuery As String Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code: Sub testSelect() Dim adoCommand As New ADODB.Command Dim sQuery As String Dim mrs As New ADODB.Recordset Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this: 9 8 7 6 5 4 3 2 15 14 13 12 11 10 1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e. Column A --- Column B ---- Column C AB ------------ 0:02:22 ----- 04/14/2007 CW ----------- 0:03:13 ----- 04/16/2007 CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I got a column A containing a alpha-numeric data and want to sum up the numeric value of each cell which begins with "t" and have the sum divided by 486 (i.e. (120+230+25)/486). I tried the following formula but to no avail.
I have worksheet of data. I have another worksheet that is used just for a summary. This data is mapped to a "Job number" (1123646, 1256974, etc.) The first two numbers determine what area it is referring to.
Each column represents a different amount (month to date cost, month to date profit, year to date cost, year to date proift, etc.) I need to summarize each column for each area and display the result on the other worksheet.
I can't use exact ranges like = sum(a9:a31) b/c that range will change each time the worksheet is used. I thought maybe using a loop, but then I got stuck and don't know where to go from here. Here is what I have so far.
Sub SumProfit()
Dim C As Range, sh1 As Object
Application. ScreenUpdating = False Set sh1 = Sheets("JB-PRF") Set C = Range("A9")
I don't want to abuse LOOPING or VBA for that matter, but I don't know of any other way to accomplish this seeing as how the ranges will not be the same each time. the shee that the data should be extracted to is named SUM-PRF
What I want to do is Take this and add in the multiplier from column "H" in the "***" page. I need to change the name of that tab, I am not trying to be foul. I just use that short for assembly. It looks bad, but usually, I'm the only one that sees it.
Basically, I want to take the material qnty and multiply it by the multiplier and put that in the box on the po page that accumulates the material.
I am having a problem with a formula I think I should be able to get correct but not sure if I am able to do so. On the attached file I have a filter on the TIER's for "Is grater than or equal to 5". What I need is a SUMIF formula that will take into account the filters. This formula needs to separate out between "GER", "IRE" and "UK" in cells C37, C38 and C39.
I have a subtotal in cell C35 which gives me the subtotal of all countries but I'd like to be able to have the subtotal separated out between the 3 countries and also still have the ability to manipulate the data so I could select different TIER's or a range of TIER's and Cells C37 - 39 automatically update themselves.
