I have a problem with a SUMIF statement. I think it is =SUMIF(AND(...
I have attached I want to sum in column E lines 255-316 if in cell D 34 and if cell B25 equals GL and cell C255 equals 0001.
Maybe this would be handled better with a sumproduct formula...
I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
I'm trying create a Sum(If formula with 2 conditions, but whatever I try doesn't seem to want to cooperate. I want to add up the sum of all invoices according to the country they deal with and the month that they were created in. I've attached a sample file showing what I'm trying to accomplish. Here is how far I've gotten so far: =SUM(IF(Main!$L:$L;B21*Main!$Z:$Z;C20);Main!$H:$H)
I've tried other forms as well but even though this only returns #Value!, at least the formula is accepted.
Is there any way to use sumif with or , in other words to put more than one condition to execute the sum process
like this way :
+ sumif(search range;condition1;condition2;sumrange)
I tried but I had an error.
I'm trying to complete a SUMIF as well as an AND statement. But I'm running into problems. Attached is my spreadsheet to make it easier to follow. Sheet DB!DK13 is my formula. What it's suppose to get is the average of all Males test scores. I've got the SUMIF formula down, that's not the problem. The problem is it's calculating all the 0's in the range as well which produces inaccurate results.
I'd like to maybe add an AND statement to state if the range ('Old and New Standards'!I:I) is >1 then average the results of just Males. I've also added an IF statement to show a null value if the cell is equal to 0 but I'm not getting why it's still averaging my blank cells.
There is a function sumif() that is used for do sum() under condition
Nevertheless, if I want to do max() under condition, how can I do?
There isn't a function maxif().
When you filter a spreadsheet, you can find results that are similar to a condition. I have families of products that share a common 3 digits, but the rest of the model number is different. The 3 similar digits could be the first 3 digits, or it could be 3 digits starting with the 2nd digit. This spreadsheet has each complete model number on its own row. In that row is a number that represents a volume. I want to be able to sum the volume column if the model number contains the 3 digits.Model Number
Volume
A hat
5
B hat
1
A glove
4
hat
8
In the above example, the total for "hat" = 5 + 1 + 8 = 14
I would type in a condition (family name) into another cell (D1) and the formula in D2.
I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.
However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.
Is there a way to have a sumif formula dependent on two conditions?
View 9 Replies View RelatedAs a starter in VBA i have a lot of doubts... one of them is, how can i sum in a column the cells that are bold? i've thought that sumif was the trick, but i don't find the way to be able to adapt code.
View 2 Replies View RelatedBelow is my function.
="Profit $"&SUM(IF(Sold!D15:D8998<>"",IF(MONTH(Sold!D15:D8998)=A4,Sold!H15:H8998)))
I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.
I have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:
View 2 Replies View RelatedI currently have a Row with this value
row1 lh lh lh
row2 8 12 8 5 2
First I will need to check if the column has an "lh" if true then sum row2, however i will need a second condition that will check that if >8 it will use the value 8 instead of 12.
However if value is<=8 get that value from the cell.
In this case the correct answer is
8 + 8 + 5 = 21
8 (because it is <=8 get the value from the cell) + 8 (because 12 is>8 use the value "8") + 5 (because <=8)
I want use the formula sumif...something like that! =SUMIF(I77:I176;AND(>F1092;<F1091);Q77:Q176). I want sum the values between q77:Q176 if the value in i77:i176 is >F1092 and <F1091 But the multiple criteriun don´t work in the sumif.
View 8 Replies View RelatedI'm trying to create a SUMIF statement that that has an embedded OR statement within, and am unable to make it work.
Basically I want to say if "column Q" equals one of 2 criteria ("cat" or "dog") then sum the corresponding number in "column P" I've tried the following statement, but it is just resulting in a zero:
=SUMIF(Q9:Q32792,OR("cat","dog"),P9:P32792)
I've seen support on statements with multiple criteria in DIFFERENT columns, but not if searching for multiple criteria in the SAME column.
Rows:
Each row contains a new client (a new entry)
Columns:Clients first and last name.
Case number
Case type - Case type can be AAA, BBB, CCC, DDD, EEE, (and many more).
Case outcome - Case outcome can be Granted (G) or Denied (D)
A case can be of type AAA, and be Granted.
A case can be of type MMM, and be Denied.
A case can be of type ZZZ, and be Denied.
Etc...
I am trying to keep track of how many cases of each type have been granted and denied. If you look at the file i attached, you will see that the table is a list of clients, with different case types and different outcomes to their cases.
The problem i am having is that i need a way to have a two-condition statement as such:
if case type is "AAA" and case outcome is "G", then add 1 to a "AAA GRANTED" column on another sheet.,....................
I'm having a problem with negative values. Somehow if the pitchX is -11.1877, let's say, and it is the right value, the code will still perform the 2nd if statement, when it should not. Am I using the wrong data type? Or is there anything I'm missing out?
Dim pitchX As Double
If pitchX > 10000 Then
pitchX = pitchX / 1000
End If
If pitchX <> Range("C8").Value Then
With Range("C8")
.Font.Bold = True
End With
End If
=IF(SUM(Q4)=0,"",MAX(0,G4-MAX(F4,Q4))/7) - to calculate number of days for year
=IF(SUM(TODAY()>G4),(G4-MAX(F4,Q4))/7,SUM(TODAY()-MAX(F4,Q4))/7) - to calculate number of days year to date
I am using this condition to calculate the length of a service which falls with in a specific review period, eg
Service starts 1 Feb 09 and finishes 30 April 09
The review period is 1 Mar 09 and finishes 31 May 09.
I would need to measure the number of days that fall within the review period, which would be 1 Mar 09 - 30 April 09
At the moment I am missing a condition which identifies whether to subtract from 'service end date' or 'review end date'.
I am attempting to create a multi condition IF statement for work. Essentially what we have is a column dedicated to the date in which a piece of equipment is supposed to go into service.
What we want to do is make it so that if the current date is 40 days past the scheduled in service date, a status column displays the term "Verify".
Additionally, if the scheduled in service date is 365 days from the current day, a status column should display the term "Future".
If it is any day in between the two, it should display the term "Active"
I have two seperate lines of code, one that covers verify and active and the other that covers future and active but I can't combine the two so that I have one function. The code I compiled is included below, any help would be appreciated.
=IF(D7=0,"Active", IF((TODAY()-40)-D7>0,"Verify","Active"))
=IF(D8=0,"Active", IF((TODAY()+365)-D8<0,"Future","Active"))
(D# corresponds to the respective cell that contains the scheduled ISD)
I have simplified my problem to its basic parts:
Column A Contains Customer Numbers,
Column B Contains a Balance.
Customers can appear more than once, but the data is sorted by customer number.
In column C, I need to put a 1 when the balance reaches 0 or less, but only for the first instance. Everything else should be 0.
here is how i'd want it to look:
customer
Balance
1st
I am running a macro which filters a column to show only records with "#N/A" (ie an error), and copies these to another worksheet. As I am aiming for no errors, there will be occasions when there is no filtered data.
My problem is that, unless I use something like xlCellTypeVisible, when there is no data shown it still copies and pastes all the hidden records. And if I do use it when no filtered data, I currently get an error "No cells were found".
I have tried many iterations of code correction and i think i'm currently blinded by staring at it so long!
My current if statement reads as follows:
[Code] .....
I think I might need to use some sort of On Error Resume Next statement, but I have never used these before. When I tried adding that before the If statement, it just ignored the criteria and tried copying hidden rows - the exact opposite of what I want.
I'd like something that said, if this condition = error, skip over entire if statement and carry on with rest of the sub.
I am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
SUMPRODUCT(COUNTIF(N3,"*"&References!$F$2:$F$34&"*"))
I am trying to pull certain members loads from our global design force spreadsheet and because of the naming convention we used for our structural members the 2nd to last character is unique to what I am looking for. I am trying to get a simple condition statement that will display the load only if the 2nd to last character of the name of the element is satisfied.
For Example, if "T" is what I am looking for then :
EDT4 will be true and give me the value accordingly
D10T1 Will also be true and return me the value
D10B2 Will not be true
I know how to use the Mid() and right() function, but I need to check the 2nd from the right.
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
It looks something like this:
I am trying to set up a sumif statement with two criteria where if the second criteria is true, the total in the sum range returned is divided by two.
I currently have this:
=SUMIF($G$6:$G$41,"digital",I6:I41)
I want to add in "digital/creative" as a second criteria (from the same criteria range) but I only want 50% of the result of these to be totalled.
is this possible?
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedI have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula
=SUM(AH3,X3:AC3)-AD3.
Is there anyway to merge these two formula's?