I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula
=SUM(AH3,X3:AC3)-AD3.
Is there anyway to merge these two formula's?
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI have a list of "weights" in column H. They can all be ranked from 1 to 30 (none are exactly the same). I want to write 1 formula that sums the top 10 (biggest) weights without having to make another column for "weight rank". I tried the following as an array formula, but it didn't work.
=SUMIF($H$3:$H$32,RANK($H$3:$H$32,$H$3:$H$32)&">=10")
I need to run the following formula in multiple excel documents so I want to creat a macro for it, creating the needed code for this.
The below formula needs to be inserted in cell B125
=SUMIF(B:B,""IDN"",C:C)+SUMIF(B:B,""MYS"",C:C)+SUMIF(B:B,""PHL"",C:C)
+SUMIF(B:B,""SGP"",C:C)+SUMIF(B:C,""THA"",C:C)+SUMIF(B:B,""VNM"",C:C))"
The below formula needs to be inserted in cell B126
=SUMIF(B:B,""IDN"",D:D)+SUMIF(B:B,""MYS"",D:D)+SUMIF(B:B,""PHL"",D:D)
+SUMIF(B:B,""SGP"",D:D)+SUMIF(B:B,""THA"",D:D)+SUMIF(B:B,""VNM"",D:D))"
The below formula needs to be inserted in cell B127
=SUM(B125/B126)
I have no clue why these 2 formulas don't work. They show blank instead of reporting actual values: ....
View 11 Replies View RelatedI need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
I have this formula. I'd liked the entire referenced amount(s) to be divided by 2. Nothing I tried worked.
= SUMIF( 'X'!$B$1:$B$3000;'Z'!$B34;'X'!$F$1:$F$3000)/7,6+(SUMIF('X'!$B$1:$B$3000;'Z'!$B34;'X'!$G$1:$G$3000)/7,6)+SUMIF('Y'!$B$1:$B$3000;'Z'!$B34;'Y'!$F$1:$F$3000)/7,6+(SUMIF('Y'!$B$1:$B$3000;'Z'!$B34;'Y'!$G$1:$G$3000)/7,6)
I have a list of codes from which I'm trying to extract all unique entries.
For example, col A has 001, 001, 002, 003, 003, 003, 004, ...
I'm trying to create a report template with formulas that reference col A and return a single unique entry for each code so that the new column has only 001, 002, 003, 004.
Essentially, the codes reference customers. A customer can have multiple purchases -- but I'm trying to create a report in which I can utilize SumIf formulas to Sum the purchases for each customer and represent those purchases on a single line per customer code.
The catch is that the purchases change monthly (i.e., next month the purchases may be 001, 002, 002, 002, 004) so my report template needs to have the flexibility to adapt without me rewriting the SumIf formulas and return SumIf results for only customers 001, 002, 004. Whereas in the prior month, the report returned SumIf results for customers 001, 002, 003, 004.
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I am trying to sum elements of a column only if the cell in the same row but different column has ANYTHING typed in it. Easy one, but we all have those days
View 1 Replies View RelatedI have a spreadsheet where I need to sum some cells where the cell contains text and a number.
For instance, if the cell contains an "A", then I need to sum the numbers in those cells. If "S", same thing. Is there a way to use a SUMIF with right(text,1) since the number in each cell will always be a single digit?
I don't know how to copy an Excel table to a Post.
A
B
C
D
E
F
G
1
MON
TUE
WED
THU
FRI
A-Used
S-Used
2
S-4
A-8
A-4
12
4
3
A-6
6
I have a large range which contains serial numbers (8 characters long) for a product and the quantity sold for each. Range is B2:C5000. Beside it on the worksheet I have the serial numbers for each product family (the first 4 characters of the serial number). Range is F2:F100. Now I'm trying to sum the quantity sold for each product family. I.E. trying to sum the quantities for the serial numbers in column B which contain the first 4 characters from column F
Here's what I tried: Sumif(B2:B5000, "*1234*",C2:C5000) This works but requires me to manually enter the serial numbers from column F (here I just randomly wrote 1234). Therefore, is there a way to take the Sumif and it the criteria part to tell it to look at the value in F2,F3,F4... and sum the quantities for the serial numbers which contain the value in that cell.
What is the formula on B2 to drag down to count entries of cell 1 which are 10 and 10 result being 2.
View 4 Replies View RelatedI would like to use a formula that will pull values into a sum where the values are in a column and the category is in another column. The criteria in the text cells could be located anywhere in the cell.
Example:
Column A Column B
xyzyszt (Baseline) 7890
wrxyz4sdtr (Strategic) 1234567
zecgjioae (Baseline) Infrastructure 71235
qpielcmjj ae (Strategic) New Capability 278332
I'm trying to make a spreadsheet to organise my bank statements. I have raw data from online banking and I want to sum all the transactions that have "SAINSBURYS" in, for instance. I am using SUMIF to add the totals only if "SAINSBURYS" on the totals page matches "SAINSBURYS" on the raw data page. The problem I'm having is that the raw data cell doesnt just display "SAINSBURYS" but "SAINSBURYS LONGWATER BCG 12345678" for example, and so i cant find a way for SUMIF to recognise that it contains "SAINSBURYS".
View 5 Replies View RelatedI want the numbers to give me a sum total if a cell that is not in the row contains an "x". Row of number from A1:A5 each cell has the number 1 in the cell. if there is a x in cell A2 i would like to get the sum of the numbers in A1:A5 in cell A3.
was trying =SUMIF(A2,"x",A1:E1) this is the formula in cell A3
I am expecting the result of 5, this formula returns the value of 1 since there is only 1 x in cell A2.
this is the code i'm currently using to enter a formula into a cell
View 9 Replies View RelatedI have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:
View 2 Replies View RelatedUsing Excel 2003, is it possible to use 2 sumif functions in one cell?
i.e., sumif and sumif
I need to do a sumif range A:A does not contain 484- as the first four characters of the cell. The 484- is not the only part of the cell containing that text. How would I do this? Ex:
A
16-1700.049820-F704264.59484-0068400F704264.59484-0101928264.5916-525129.00
=Sumif(A:A,Does not begin with 484-,B:B)
I attached a file I made conditional formatting on cells C4..G6 which makes any number less than value in cell C15 invisible. In line " Total" I used SUMIF formulas which ignore any value less than 30. However the formulas should not contain static numbers but rather a reference to cell C15. But I simply cannot make it work.
View 2 Replies View RelatedI'm trying to reference a cell on another worksheet in my criteria and the formula doesn't seem to be working. All I get is a value of 0.
= SUMIF(G3:G76, ">='City Wide'!B6",I3:I76)
If I replace 'City Wide'!B6 with an actual number the formula works. This does not help as 'City Wide'!B6 is a value that can change.
I have just installed Excel 2007. Is there a way to sum a range of cells based on cell color in Excel 2007 without creating a macro or UDF?
I was told there was, but I can't find it and for some my reason my help index is corrupt.
In Column A, in each cell in rows 1-10, there is various text that may or may not include "ABC" and "DEFG" as the first four letters. In Column B, rows 1-10, there is numerical data. What I would like to do in Column C, rows 1-10, is place a formula that would return the contents of the respective cell in Column B, but only where the first three or four letters in the respective cell in column A is "ABC" or "DEFG".
View 9 Replies View RelatedI am trying to use the SUMIF function in excel where I want to sum a range of cells greater than whatever is in cell D8. Here is what I tried to use, but it doesn't work. SUMIF(A2:A10,>D8,B2:B10)
The content in D8 can change because the user makes a choice from the drop-down list and a number pops up in D8 that is referenced to their choice.
I have 2 excel files (both .xlsx) and in the first file i am creating a reference to cells in the 2nd file using SUMIFS function. The 2nd file has 275,000 rows of data. I can create the formula correctly, however when i save the file, it just crashes every time (says not responding). If i create simple reference (=A275000) then its fine so im not sure what the issue is.
View 1 Replies View RelatedI would like to make the SUMIF function conditional on recognising 1 word among a series of text within a cell.
For example, SUM all cells containing word PINK, even if there are other words in the cell also.
I cannot get the SUMIF function to pick words out of a cell, it will only SUM up if the whole text matches what is in the cell.
I am very comfortable with SUMIF, but need to search a range any any cell containing words or phrase "20%" then need to sum those corresponding cells only.
I.e., something like: SUMIF(A1:A10,..."20%",C1:C10) .... only sum all C cells where an A cell contains any combination of words with "20%" in them.
I'm working on a sheet where by I need to reference multiple columns of information to calculate a total.
Such as (simplified example of my real issue):
__A__B__C
1 20 AP1 C30
2 25 AP1 C30
3 35 AP2 E10
4 50 AP3 E10
My requrement is to only add values in column A wich have corresponding column B="AP1" AND column C="C30"
I've tried the following and keep getting errors:
=SUMIF(AND(C1:C4,"C30"),(B1:B4,"AP1")),A1:A4
I'm trying to do this:
=SUMIF(B5:B12,OR("=D*","=?D*"),D5:D12)
It returns zero each time.
(BTW,
=SUMIF(B5:B12,"=D*",D5:D12)
and
=SUMIF(B5:B12,"=?D*",D5:D12)
both work just fine and return non zero sums.)
So my question is,
Where do I put the OR, or is there another way to do this?