I'm trying to use SUMPRODUCT as a sort of SUMIF/VLOOKUP hybrid. The following formula:
Code:
=ROUND(SUMPRODUCT('[12 GB BUDGET 15 V1 LOCAL VERSION.xlsx]
Revenue'!$G$3:$FM$3=$K2)*('[12 GB BUDGET 15 V1
LOCAL VERSION.xlsx]Revenue'!$G$27:$FM$27);0)
... should check for the value in cell K2 of the current sheet, compare it to all the values in row 3 of the Revenue sheet, and add up any and all values for those columns in row 27 where there's a match in row 3.
I don't get an error, but it's not adding anything up, either.
I cant seem to figure out why this sumproduct formula wwill not pick up the datatable on a separate tab. Data table is Column E to AA but it only goes to Column Y. If I try putting AA in - the formula returns the VALUE#. I thought it maybe the cell formatting but it does not seem to the problem.
I work in school which for example offers 20 courses for every student. Therefore I have a spreadsheet which has students name in A and B then the 20 courses spread from C to V.
Each student will study 3, 4 or 5 of the courses and will have value in the corresponding column (their teaching group) the rest of their row will be blank.
For each student create in columns X, Y , Z, AA and AB I would like to be able to pull from the 20 courses those which the student studies. Therefore finishing up with C to V hidden and just the student names and the 3, 4 or 5 courses they study.
Any ideas? if one method is to get them into one cell how do I get them into the 5 columns; i know DATA : Text to Columns but won't have anything to Delimit it with and can't use Fixed width as students will study subjects with different length charactors.
I have a list in excel with ten values, but I need to get all combinations possible, picking 4 of 10 each combination. This must be as a combination and no permutation or variations either, I mean, values can't be repeated in a single combination.
I'm struggling to do this in a Macro but I don't get it.
Now i want to select member column values based on the differences in values between members of location column should be 50000, it means if select web then my next selection should be SEB because next value (i.e web + 50000) is 100000 and it is matching to SEB in members column.
i have information across three columns the first has user-names in each row the whole way down, the second has between 1-7 activity codes (when not eacher user will use), the third has the times they have been on these codes.
what im trying to do is match the name, code and get the time to be displayed in a fix table, as the reported information is not always in the same structer
now i've got it in my head that sumproduct iwll be the best way to get it, but i cant seam to get the third array to work properly, and always comes up with either value or NA
Is there a way to sum a list that contains both text and values using the SUMPRODUCT function? My efforts yielded the #VALUE! error. SUM and SUMIF will ignore the text but I have multiple criteria.
The problem facing by me that I have a worksheet in which I count some values through sumproduct function in vba but its not working but if i manually put in this in sheet it works.here is the code.
Dim Sal As Workbook Dim rng As Range Dim rng1 As Range Dim Dept As Range Dim Dept1 As Range Dim rg As Range Dim i As Byte
Sub salries() Application.DisplayAlerts = False On Error Resume Next Set Con = Workbooks("Branch Wise Deparment Wise No. of Staff.xls") Set Sal = Workbooks("salarysheet.xls") Sal.Activate Sheets("Working").Delete Sheets("GT").Activate Range("B3").Select Set rng = Range(ActiveCell, Selection.End(xlDown))..............
I am trying to sum up column V, when for a specific date in column z, and only sum when the two names EEM, Merri1* are involved. I used the * because there are a couple of variations for MErri1 after the 1. The formula is not working. I believe it's the way I'm combining this
I've used the sumproduct formula very sucessfully in a workbook. The workbook is used to monitor discrepancies routed to other departments. Column U has the status of the discrepancy (Open, Closed, Cancelled etc). The below formula returns the number of discrepancies raised to a particular department. Now I need to tweak the formula to exclude values "Cancelled" found in range $U$119:$U:417.
I'm working on a spreadsheet to rank stores based on how they perform in certain metrics. These metrics are weighted, and occasionally a metric for a store will get waived. I'm having trouble figuring out how to handle this without making a custom formula for each occurrence.
Is there a simple way to include the values of an entire range?
This is what I tried, but I get #name
Code: =SUMPRODUCT((Datasheet!J2:J65000 = Range("C3:AA3"))*Datasheet!F2:F65000) If I use a single cell it works, but only with what matches that cell.
Code: =SUMPRODUCT((Datasheet!J2:J65000 = C3)*Datasheet!F2:F65000) I'd like the criteria to match anything in that range C3:AA3. Do I need to specify each cell individually or is there an easy way have it use the entire range's values for its criteria?
Sumproduct formula with selection criteria of "A", "B"... in the first column and numeric values in the next colum. The selection is controled by a List where the user can choose "A", "B", ... ,or "ALL". What wildcard-type (pseudo) is needed to select all values when "ALL" is chosen?
I'm using Sumproduct because there is other selection criteria, but it should not impact this part of the formula.
Example: Sumproduct((A1:A100=X1)*(B1:B100)) , where A=selection aray, B=numeric value, X1=corresponding list selection to A
Question is...in the below formula the red are pointing back to name ranges in a different tab on my spreadsheet. On that spreadsheet I also have a name range called DTCCSUBSUPPREF
I would like to add within my formula, a string which will point to that name range and exclude values if they fit my criteria. Basically I need to see values only where comp or tri dont show up. comp or tri could be the only value in the cell, or could be in the beginning of a string, at end, or in between. Below examples. I have tried (--(DTCCSUBSUPPREF<>"*comp*")*(--(DTCCSUBSUPPREF<>"*tri*") , and I would have thought the * characters would have served as a catch all.
Below is the entire forumla just in case.
11111111FT04comp comp tri 11comp 11tri tri11111111FRP06
I'm looking at the formula in Sheet3, cell F5. You'll see that the criteria "--(Sheet2!I:I<>Sheet1!O:O)" does not seem to be working. I need the formula to not include any values from Sheet2!E:E, where the corresponding value in column I does not equal any value in Sheet1!O:O. Also, these values can change by user so its not as simple as just typing them in to the formula as an array...
That VBA part of this is that it's in a macro, so if there is any way to make this easier using code instead of a simple formula.
The Table : Column R represents a list of services
Column L is the full price Column N is the discounted price ( my example reflects no discount in this case) Column C is an associated code , in some cases the code is n/a Starting at Row 13 ........
I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.
Using Excel 2010, I am trying to do a Sumproduct formula with two criteria, one of which needs to ignore text values.
Here is the set up:
Column AColumn BColumn C (Side)(Qty)(Price) Buy5,51215.67 Sell119,428null Buy24,20945.77 Sell20,05412.25 ...
I'm trying to find the sumproduct of Qty * Price if the side equals "Buy" (or "Sell") but ignoring the "null" value in column C. The formula I have is =SUMPRODUCT(--($A$2:$A$20="Buy")*IF(ISNUMBER($C$2:$C$20),--($B$2:$B$20*$C$2:$C$20)))
The result in the cell is 0, but if I open the Insert Function dialog box, I see the correct value being returned.
I want to determine the number of values SUMIF/SUMPRODUCT functions used/checked to arrive at the answer, i.e. 95 for row 2 and 116 for row 3. A function that can give a 3 and 2 respectively.
Example:
Results for Row #2 gives: 95 with 3 values picked up under "Rate"
Results for Row #3 gives: 116 with 2 values though three places were checked up under "Rate"
How can I count the number of these values referencing at the "Rate" like in the functions used.
I managed to use SUMIF/SUMPRODUCT functions to calculate totals based on "Rate" in row one.
I tried COUNTIF function, but allows only field/heading.
I am trying to count the number of rows that have values greater than 10/01/2008 in either of two fields. I tried following formula but instead of giving total number of rows, it returns a random date.
The purpose of the attached workbook is to calculate the average number of days a customer takes to pay their invoices. There are two tabs - Invoices and Payments. I am trying to calculate the number of days between Invoices "Sales Date" and Payments "Settlement Date".
The Payments tab is raw data exported from Attache financial system as CSV. It is the best I can get out of the system but the columns are all over the place.
I thought maybe from the Invoices tab I could search a row on the Payments tab to match the invoice number, find the cell containing the phrase "Invoice Number" then pick up the date from the following cell which contains the Settlement Date . This would be straight forward if the data from the CSV file consistently landed in the same column in the Payments worksheet, but it doesn't. As you can see, the phrase "Invoice Number" might appear in any one of several different columns.
I've created a useform for recording stock trades. So it asks the user to enter values for
"Date of trade" "Time of trade" "Name of stock" "Price"
Right now I'm using a calendar control I downloaded from http://www.fontstuff.com/vba/vbatut07.htm and it looks good, but I'd also like to have an easy way for the user to select the time of the trade (in minutes).
Is there an easy way to have a time picker? Like a dropdown box maybe? I'd like to have date and time picked separately since the date will remain the same for a lot of trades but the time will always change.
I've googled it a lot and some people mentioned using the datetimepicker Access add-in but I'm not sure if that's right for me. Also, I'm using Excel 2007 but the form will also be used on excel 2003 machines, will that affect the choice of solution?
I have a CSV file which contains a list of records about offices. This CSV file is generated from another program.
I read the CSV file with VBA, a SELECT * SQL statement which puts the elements into an Office Object and adds the offices to a collection.
For some reason, when one of the Telephone numbers is read it is being identified as a Null value. If I manually open the CSV file and change it to a different number e.g. 12345 and try re-read the CSV file with SQL VBA the number gets read fine. Every other element in the CSV file reads fine except for this. The number itself is 7736786460.
Attached is the small snippets of code to read the CSV file which is fairly straightforward.
Code:
Sub LoadUnits() Dim oRs As Recordset Set oFSObj = CreateObject("SCRIPTING.FILESYSTEMOBJECT") 'Open an ADO connection to the folder specified Set oConn = CreateObject("ADODB.CONNECTION") oConn.Open "Provider=Microsoft.Jet.OLEDB.4.0;" & _ "Data Source=" & strFilePath & ";" & _
