I have a range that contains dates, with some cells within containing text (e.g. "TBC" or "planning will occur wk42"). I have basic rules as below:
- highlight red if older than today - highlight green if today or in the future
The problem I have is that the cells that have text are highlighted green which I don't want. I also don't want to have to go through the range removing conditional formatting from each of those cells each time I copy over new data. Is there a way of telling excel to not use conditional formatting on those cells that contain text so I can manually highlight as I need? Some have text as that is how I receive the data.
I'm attempting to use Conditional Formatting to hide text where the background is shaded. When the background is white, I can just set the text to white and it is invisible - no problem. However, when the background is set to anything else, and I set the text to the same color as the background, Excel LIES to me. It pretends that the text is invisible, but it still shows up in Print Preview and when it's actually printed. The Custom Format ;;; doesn't help me, because I need the invisibilization only under certain funky conditions.
conditional format formula that is based on a text range within a cell. In my case, I would like to compare the low and high range when inputted as a number followed by the quotation marks followed by space then hyphen, space then number and ending in quotation marks. The quotation mark is being used to represent inches.
Like this in cell D14: 0.2” - 2.2”
I am using the following condition format formula which works for the strict case above.
HTML =OR(D16<LEFT($D$14,3)+0,D16>MID($D$14,8,3)+0) However, there will be times when users using this spreadsheet may leave out the spaces on either side of the hyphen, or add more than one space between the number and hyphen. Also if additional digits are added, my formula above does not include all the digits in the results. I prefer to leave the quotation marks in...........
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have five fields that have a conditional format applied to them: (see attached). Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
In D2 I have: =B2 In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
Need to create a set of aligned text amts from various cells...Tried Format but unable to get right combination...I've looked at many threads and most seem related to getting amt from text instead of reverse.
Cell may contain nothing or a monetary amt, negative or positive. Output needs to be in format of "$9,999.99-" or similar...with leading zeros suppressed but a min of "$ 0.00" showing, so that above/below amts with be decimal point aligned in a fixed font situation.
I've almost gotten my routine finsihed but this is last remaining obstacle.
I'll get straight to the point: How can I change this text format from 474556788 to 0-47455678-8 (dash added after 0 and before the last number). I need to apply this to around 5000 rows (can't do that manualy). I want it to be int his format:
474556788 to 047-455678-8
Tks Auto Merged Post;474556788 to 047-455678-8 (This is the wanted format)
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
I have a workbook with 12 worksheets corresponding to months. Each is formatted in A1 with the month (Date, Jan-01) and all rows below, starting at A5, are the days of the month (Custom, ddd d). All cells are linked so they change accordingly with A1.
I'm trying to apply conditional formatting so that all Fridays will have light grey shading across the row. I can get it to shade every 7th row using the MOD & ROW functions, but the shaded row changes with subsequent months and years (not necessarily Fridays). Can I get it to recognize every Friday through the year.
Disregard the First Table. I cant remove it. refer to the Second Table
This table is a Task Tracker. The Start Button Adds the Current Date in Enercon's Row C1 and the row below (C2) will automaticaly filled with color using Conditional Formating. My Question is how can I code a conditional format for Trail1 Rows. For example when Trail1 Cell is active then you click the start Button instead of Coloring D2 Cell it should Color D3 Cell.
Here is the Code in Start Button
Sub cmdStart_Click() Dim i As Integer Results = MsgBox("Are you working on " & ActiveCell.Value & " today ?", vbOKCancel, "") If Results = vbOK Then
With Sheets("Sheet1") i = .Cells(2, Columns.Count).End(xlToLeft).Column + 1 .Cells(2, i).Value = Now() i = i + 1
End With Else Range("A1").Select End If End Sub Regards, Kevin
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
I m creating a sheet in excel where I need to do some conditional formatting but need more than 3 rules so i'm guessing i'll need to use some vb code.
Basically I have a range of cells say from c12 to ag15 These cells all have formulas in linking to other cells in other sheets.
Tha values that will be in them are as follows: s, h, hd,ooo,z and maybe 1 or 2 more will be added later. I need the cells background and text colour both to change to a colour depending on the value in the cell.
eg. cell value = s then background and text colour both to be yellow.