Sub Printstuff()
Application.ScreenUpdating = False
For Each cell In Range("V168:V246")
If cell.Value = "YES" Then
'enter the name that is in The A (of the row with Yes) column in A2
'Run Sub Individual
'Print
'Run Sub View All
End If
'Next "Yes"
End Sub
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I have values
2
8
9
As so on in my cells a1,a2,a3 as so on
And I want value of column a repeating five times of each cell value in column b
like result
2
2
2
2
2
8
8
8
8
8
9
9
9
9
9
and so on
I have 2 column in Excel sheet A and B .
What i need that when i enter values in the first column A the column B copy this values , but when i repeat value in first column A .
The column B would not copy it that all I need .
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
I need a code to copy the color of column B and put in the respective cell in Column A. I just need the color to copy from column B to Column A.
View 6 Replies View RelatedI have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
Private Sub Workbook_Open()
Range("A1").End(xlDown).Select
Selection.Copy
Range("L1").Select
ActiveSheet.Paste
Range("A1").Select
Application.CutCopyMode = False
UserForm.Show
End Sub
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
search column "E" for a specific text value (let's say "it"). When found, copy the value in column "A" for the corresponding row where "it" was found to another cell "F2". When copying to cell "F2", if a value already exists in cell "F2", then no nothing else copy the value. If no "it" was found in the column, do nothing. I will continue to search, but since I am new to VBA it takes me a bit to find what I specifically need.
View 1 Replies View RelatedI want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
I wanted to copy the cell value of column C to column B how should i do it in macro. result in Sheet2.
View 8 Replies View RelatedI am really desperate about this. I have a column of which I only want every 9th cell value listed seperately one below the other in a seperate column.
I tried defining the first two cells of the new column (e.g. first cell input is =B1 and second one is =B10, third one would be =B19 and so on...) and using the usual pull down.
In short: I want to copy values from A1,A10,A19,A28...(always +9) into B1 (from A1), B2 (from
PS: I have access to the 2008 Mac OSX version as well as to the 2007 Windows version!!!
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View Relatedwhat I need to do is , while an id value is constant copy 2 adjacent cells to a new location on the same row as the first occourance of the id value, then if the id is the same on the next row repeat the copy and add these 2 values to the cells next to the ones previously copied.
Once the Id value changes then the copy restarts on a new row which is the same as the first occourance as the new id value and repeats the same sequence as described in the first statement.
I have attached a sample spreadsheet showing an example of the source and how I would like it to end up, the colour is only there to seperate the outcome from the source and is not required in the code.
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab
001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
I think that I have explained what I need to do
I need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
I’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
[Code] .........
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook?
I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedI need to copy Invoice id from Column B to Column A, firstly it would be to the cell one down and one across, ie data from B3 is copied to A4. I then need to continue to copy this data down in column A but only while there is a date in column B.
View 7 Replies View RelatedI have a workbook that I have set up some VBA code so that when it opens I have a box ask, "View Data" or "Start New Audit." When the user clicks "Start New Audit" Excel creates a new sheet, names it based on the current date (in yyyymmdd format), and copies a range from a sheet called "Master Sheet" to this new sheet. These new sheets are for users to input data on a daily basis. As that data is typed in, there are four different columns that have an average function at the bottom. I need the result of that average function to be sent to another pre-existing sheet on the next empty row so that I can create a chart out of it.
View 4 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedLooking to find a way to take the value of one cell and copy it to a column starting from IK5 to the end of column the amount of row will always be different. So if I type "need to call" in cell F1 and I would like to have a macro button to copy this to column IK cell 5 and on to the end of the data. Here is what I have so far.
View 3 Replies View RelatedI have about 50,000 rows of data spanning over various numbers of columns.
Here is some dummy data
Sheet1 ABCDEFGHIJKLMNOP141233434 7 285673678899 6 3645678434678643 4
macro to copy the 5th last value in each row to column A. Note the 2nd last cell in always blank.
Suppose I am receiving date in cell A1 form external source on each time I refresh, each time the data that comes in Cell A1 is different based on the source sending this data to me. I want to register whatever come in cell A1 in b1, b2, b3 so on.
View 2 Replies View RelatedI'm creating a POS system for my wife's business. The workbook has three sheets.
On the first sheet are all the articles that her shop sells.
On A1 to D1 is the following text:
Quantity Discription Price Totalprice
B1 to D1 is already filled in. When a customer buys something, a employee only has to fill in A1, how many of what item the customer buys.
So it is possible that only 5 items have a number filled in, in A1.
Now, i have a vba, which has to search all the items which have filled in quantity and then copy row A to D to a sheet called Receipt. (Later I want to print this receipt)
Now this vba work when all the filled in cells are above each other. When there is a gap between the cells, it only copies the first row.
Here is the VBA:
Sub test()
Dim r As Range, c As Range
With Worksheets("Kassa")
Set r = Range(.Range("A1"), .Range("A1").End(xlDown))
For Each c In r
If WorksheetFunction.IsNumber(c) Then
Range(.Cells(c.Row, "A"), .Cells(c.Row, "D")).Copy
[Code] ........
When I change the second A1 in the fourth line to A200. I works, but is extremely slow. It's almost like if Excel is responding anymore. Also, when no quantities are filled in, it's also slow.