I need to copy Invoice id from Column B to Column A, firstly it would be to the cell one down and one across, ie data from B3 is copied to A4. I then need to continue to copy this data down in column A but only while there is a date in column B.
View 7 Replies
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI have a workbook that I have set up some VBA code so that when it opens I have a box ask, "View Data" or "Start New Audit." When the user clicks "Start New Audit" Excel creates a new sheet, names it based on the current date (in yyyymmdd format), and copies a range from a sheet called "Master Sheet" to this new sheet. These new sheets are for users to input data on a daily basis. As that data is typed in, there are four different columns that have an average function at the bottom. I need the result of that average function to be sent to another pre-existing sheet on the next empty row so that I can create a chart out of it.
View 4 Replies View RelatedI have the price of S&P 500 in the L2 until L145 column.
And I would like to past each cell (L2, then L3, then L4....until L145) 220 times in column F.
As follow
L :
1780
1715
1680
.........(144 value)
TO column F
F:
1780
1780
1780
.........(220times)
1715
1715
1715
.........(220times)
1680
1680
1680
........(220times)
I want the VB Code to do the following;
For each row in Column C, if the text starts with "Calls from service no", it must extract the last word and paste it into corresponding row in Column A. So if the macro finds a cell in Column C starting with "Calls from service no..", then the last word (the last word will always be a number and is seperated with a space) of this cell must be pasted in cell A45. So it must continue for all occurances in Column C. Sample of text in cell = "Calls from service no 0431324345" and "Calls from service no 3242134254" etc.
I also require similar, but this time it must extract as shown below.
If text is found in Column C starting with "Local" or starting with "Long Distance" or starting with "Mobile", only this text, ie "Local" or "Long Distance" or "Mobile" must be pasted in Column B.
It can be 2 different macros that I can run.
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies View RelatedI am using Excel 2007. I have a worksheet called January and I have a range of formatted cells in 'January' between B15:18 and BA15:18. Some contain formulas, others are just formated to size and or color. I want to copy and paste this range of cells (B15:18:BA15:18) to the next available unformatted or blank cell of the column of the same worksheet by pressing a button. I also need the newly pasted range to reset to their original formatting assuming data was entered before the button was pressed.
View 5 Replies View RelatedI type all the information into the Workbook called 'Form' in ' Sheet 1' and i need it to also transfer into the workbook named 'Master' in sheet 'August 08'
For Instance.
It needs to copy Cell C4 from Sheet1 in Form and paste into the next empty cell in column A in August 08 in Master.
All comments/improvements would be much appreciated as the macro I attempted to create solely didnt work at all.
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedI am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
2 Different worksheets to work with
The "Nursery" Worksheet
I already have code that puts the Auto-Sum amount below the last data row in the column named "Nursery Grand Total" in the Nursery Worksheet.
This Auto-Sum amount, however, will always be in a different row because the amount of rows generated from the report is always different as well, therefore, the Auto-Sum cell/row changes with that to be right below the last data row in the "Nursery Grand Total" Column.
I would like to copy (values only) the amount from this dynamically changing Auto-Sum cell and paste it into another worksheet named "Totals".
The "Totals" Worksheet
In my "Totals" worksheet, I have two columns.
"Master Total Description" and "Master Grand Totals".
In the "Master Total Description" column, I have a cell named "Nursery Grand Total" which is exactly the same name as the header row in the "Nursery" worksheet.
So,
In the "Nursery" worksheet/"Nursery Grand Total" column, I would like to copy the auto-sum amount
and paste it into....
the "Totals" worksheet/"Nursery Grand Total" row/"Master Grand Totals" column
Here are some pictures for reference...
Is it possible to do a macro to copy a cell in excel and paste that cell in outlook and return to excel
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I would like to copy and paste the hyperlink in Cell A1 to A2. Not sure how to do that w/o pasting the values in cell A1 as well.
View 7 Replies View RelatedHow do I Copy and paste from one cell to another cell but without replace the data? So keep all the data both data in the second cell.
View 8 Replies View RelatedI have a constantly updated cell (A1) where I log the amount of customer products. I have a sheet where I log the payments on a monthly basis from these customers. What I want to acheive is when I enter the date the money was received in 'B1' for 'C1' to look to 'A1' and paste that value (let's say 29). Then in the next month this number could have gone up to 31, so, when I then enter the date of money received in 'B2', 'C2' will look to 'A1' and paste '31' and so on.
View 4 Replies View Relatedi have this data ( Device:[Hc1 3300 Trunk1] P776 - Mecca Cash Out) in cell d3, what i need is my macro to refer to that cell and bring back the text after the dash and paste to another cell.
For example, if it had that text in d3 then the macro runs it puts just Mecca Cash Out in D2.
i have 2 sheets.
i want to copy 3 cell values from sheet1 to one cell in sheet2.
what exactly i need:
From sheet1 - value of cell AI4,AK4,AU4
To sheet2 - in cells A5 to An(n cells)
and an "-" inbetween AK4 and AUK
example output:
F12345-01
F from AI4
12345 from AK4
01 from AU4
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedIn a column, there are data, but in between of each data in a column, there are many blank cells. I would like to do a copy and paste of the first data, and paste it in the same column column, while the cells are blank, and stops when there is a cell with a data, which is different than the previous one, and do the same again and again.
View 4 Replies View Related
