I have an excel spreadsheet with:
2 sheets,Sheet1 and Sheet2
4 columns (A,B,C,D)
100,000s of rows.
I need to search 3 columns, B,C and D, for particular values.
Column B needs to be = 0
Columns C and D need to be "<=0.1"
When all three criteria in the row are matched I need the value from column A in that row to be pasted to Sheet2 and then for the macro to continue searching the rows.
I have attached an extract of the data as the files size is too large to upload.
I am pulling from odbc into an excel sheet Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need. Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
I am working on a time management sheet for my company. I need to be able to click a button and have the file search 3 columns for a persons initials and then hide all the rows where the initials are not in at least one of the three columns. I seem to have no problem getting it to work for one column at a time, but as soon as I try to search more than one it all falls apart.
I will also need to create an unhide all button to reset the sheet after the macro has been run.
I have attached a sample of the sheet below. Each project needs to have 3 rows to show the schedule and budget broken down by each team member.
I would like to search across a number of rows in a worksheet and then match against two columns.
e.g.
Column B Column C
test 10
I would like the function to match against all rows that match against "test" in Column B and then work out which cell in Column C has the highest value
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
I have a data sheet and I usually copy manually the values from different columns. I would like to paste them into another worksheet so that when I paste the values in Column A, I should not surpass Row100, and if so then the code should automatically shift to column B and start pasting. This should apply to all the columns till column F. Once column F is full till row100 then the procedure should start again from column A.
I need a formula to transpose rows to columns of a large table. The transpose array formula is not working for me. I know there is a column and row function formula to do this, but I can't remember it.
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test() Dim idRange As Range, c As Range Dim uniqueID As String Dim destSht As Worksheet, sourceSheet As Worksheet Dim r As Long Dim i As Integer Dim map As Object, key, item
I have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
the macro needs to look in sheet2 column B, the data that it needs to look for is in sheet1 column a, once it finds the data in sheet2 column B, the original search criteria needs to be paste starting in sheet3 A1 while all the found data needs to be paste in column B.
It will then proceed to look for the next data in sheet1 column once it's done searching on the first item. I can't even think how to start with this one, it's too complicated for me. I attached a sample data. The search data is in sheet2 and the lookup data is in sheet1.
I am very new to macros and I do not know what I am doing. I am trying to create a macro that will search column O for any entrys, if it finds an entry, then it will select the row with that entry, cut it, and then paste into the sheet named complete on the next available row.
with a macros to search for a certain value through an input box, and once that value is found, I need its corresponding row to be cut and pasted into the next available row in its corresponding sheet, and then the remainging rows to be shifted up.
For example, in column B of sheet 1, I have trap ID's. I need an input box that will search for the 'trap ID' that I enter, and then cut that row and paste it into its corresponding sheet. I will have numerous other sheets with different titles, so I was hoping to add the sheet to transfer the row to in the inputbox. I have found and modified a code, but cannot quite figure out what im doing wrong. I have attached my current code.
I am trying to learn VBA and am struggling to figure out how to get started with this problem. On my "Master" sheet in cell B107 is a section where you can enter a search term. The term entered should be found in the headers on my "Site Resources" sheet in A2:H2. If it finds the term in the headers then I want it to copy and paste whatever is below that header into C108 and down in the "Master" sheet. How would I start this code?
I have a large sheet (approx 4k rows) and need to verify the contents of each cell by taking the name and searching for it in another workbook. I then need to copy over the cell contents found under certain columns in the secondary book and paste them into appropriate columns (row where search name was found).
Ex. I search for Apple and find 6 instances of Apple in the second book. I then take the contents of the cells found under columns Make, Model, Year (all from the row that showed the results as apple) and paste that into the same-named column in the first book.
I have been doing this manually but it takes too much time.
I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats) Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents) Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
I have a folder with many subfolders and I want to search ".xls" files from these subfolders and then cut and paste them to new location. There is a code available over interned for searching files in folder but apparently it does not work in newer versions of Excel.
I can just use the macro recorder on. The screen shot below is an example of one of many sheets I have in a workbook. Each line would represent a customer order. I like to be able to search all but the first and last sheet for orders due on a user entered date. Then when it does find a match to the due date copy the order details( range b3:n3 in example below) over to a new sheet and continue searching and copy over other matches below the previous to creaye a list of orders due that day...
Basically a VBA code for a Command Button which when being pushed looks for the last cell being used in column A and copy/pastes rows 1 to 19 right in the next cell where this X (just an example..X could be anything basically) would be found. My columns go up to BU.
I have a workbook that is an export from an inventory database. Basically I need to search Sheet1 column B for any item with "DDC" in its value, select the entire row, copy/cut it, and paste it into Sheet3. It would be nice to have it delete the row from Sheet1 after successful paste. I want to stress the fact that I'm a no0b with excel macros and have a very small understanding of programming in general. I've tried taking a few different macros with similar goals and slapping them together, this is what I've come up with so far with still zero luck.
At the moment the error is "Application-defined or object-defined error" with "With Worksheets(1). Range("B")
Sub DDC() With Worksheets(1).Range("B") Set c = .Find("*DDC*", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Copy Destination:=Worksheets("Sheet2").Range("A" & Worksheets("Sheet2").Range("A65536").End(xlUp).Row + 1) Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I have a workbook with 6 worksheets in, 5 worksheets contain data whilst the 6th I will use as a search worksheet. The 5 data worksheets contain columns A to J which have text entries in.
What I would like to click a button on the search worksheet, lets call it worksheet 1, and for an inputbox to allow the user to enter a text search. The macro would then search for this text in columns A to J and all rows (or rows with data in) on the 5 data worksheets, and if found, copy the entire contents of those rows where the text is found and paste them into worksheet 1, the search sheet.
I have done a forum search and found a few examples of this type of search but not across multiple worksheets, also I found this code that does search across multiple sheets but does not copy and paste:
VB: Sub Find_Data() Dim datatoFind Dim sheetCount As Integer Dim counter As Integer
