Basically a VBA code for a Command Button which when being pushed looks for the last cell being used in column A and copy/pastes rows 1 to 19 right in the next cell where this X (just an example..X could be anything basically) would be found. My columns go up to BU.
What I have is a workbook where I have to filter on a column called "Code" in a worksheet called "Current" and search for varies criteria and then copy these filerted rows and paste into a worksheet called "Past" and then delete the orginal rows form the "Current" tab.
e.g. filter on a column called "Code" and filter on the criteria that match "Monday", "123" and "Customer Accepted" and paste at the bottom of the "Past" tab and then delete from the "Current" tab. A message should then be displayed saying "Data Transferred OK" with the curser then highlighting "A1" on the "Current" tab.
The only cavat is that the code may find none, some or all of the required criteria, however, in the event of finding no matching data then a message should then be displayed saying "No Data Found" with the cursor then highlighting "A1" on the "Current" tab
As I have to repeat this to filter on various columns for various criteria I intend to modify the code accordingly, however, in once instance I will have to filter on a column called "Code" and filter on the criteria 1,2 and 3 etc but then I have to do second filter on column called "Code Extra" and then do a filter on the criteria 4, 5 and 6 so the additional code would also be good.
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
[Code].....
So the problem is this line:
[Code] .....
I have attempted to replace this line with:
[Code] .....
But there is something wrong as the code keeps breaking on that line!
the macro needs to look in sheet2 column B, the data that it needs to look for is in sheet1 column a, once it finds the data in sheet2 column B, the original search criteria needs to be paste starting in sheet3 A1 while all the found data needs to be paste in column B.
It will then proceed to look for the next data in sheet1 column once it's done searching on the first item. I can't even think how to start with this one, it's too complicated for me. I attached a sample data. The search data is in sheet2 and the lookup data is in sheet1.
sheet 2 column 1 has a name in it. I need to search sheet 1 column 1 for that name
when that name is found copy "b" thru "F" of that row
and procede until end of column (using that same name) and then go to next name in list (sheet2) and repeat
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats)
Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents)
Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
I can just use the macro recorder on. The screen shot below is an example of one of many sheets I have in a workbook. Each line would represent a customer order. I like to be able to search all but the first and last sheet for orders due on a user entered date. Then when it does find a match to the due date copy the order details( range b3:n3 in example below) over to a new sheet and continue searching and copy over other matches below the previous to creaye a list of orders due that day...
View 21 Replies View RelatedI have a workbook that is an export from an inventory database. Basically I need to search Sheet1 column B for any item with "DDC" in its value, select the entire row, copy/cut it, and paste it into Sheet3. It would be nice to have it delete the row from Sheet1 after successful paste. I want to stress the fact that I'm a no0b with excel macros and have a very small understanding of programming in general. I've tried taking a few different macros with similar goals and slapping them together, this is what I've come up with so far with still zero luck.
At the moment the error is "Application-defined or object-defined error" with "With Worksheets(1). Range("B")
Sub DDC()
With Worksheets(1).Range("B")
Set c = .Find("*DDC*", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Copy Destination:=Worksheets("Sheet2").Range("A" & Worksheets("Sheet2").Range("A65536").End(xlUp).Row + 1)
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I have a workbook with 6 worksheets in, 5 worksheets contain data whilst the 6th I will use as a search worksheet. The 5 data worksheets contain columns A to J which have text entries in.
What I would like to click a button on the search worksheet, lets call it worksheet 1, and for an inputbox to allow the user to enter a text search. The macro would then search for this text in columns A to J and all rows (or rows with data in) on the 5 data worksheets, and if found, copy the entire contents of those rows where the text is found and paste them into worksheet 1, the search sheet.
I have done a forum search and found a few examples of this type of search but not across multiple worksheets, also I found this code that does search across multiple sheets but does not copy and paste:
VB:
Sub Find_Data()
Dim datatoFind
Dim sheetCount As Integer
Dim counter As Integer
[Code]....
I would like Excel to do the following and have no idea how to write the instructions. The function is as follows:
From a general information sheet (sheet #1), XCEL looks at a cell to determine if that cell holds "A" or "B" (will be a word, and choice will be previously fixed by a dropdown menu). It then looks at another cell in the same row to determine if it equals 0 or 1.
If the cell holds A, and the other cell holds 0, XCEL copies the row from the general information sheet onto sheet #2 of the same workbook.
If the cell holds B and the other cell holds 0, XCEL copies the row from the general information sheet onto sheet #3 of the same workbook.
After XCEL has copied a row, it inputs a 1 in a final cell of that row so it will not copy that row again.
On sheet #2 and sheet #3, XCEL begins (and copies to) the first open row in column A (by moving there after performing its last copy function or by checking column A until it finds a cell = 0), so that each new copy function begins in an open row.
I am trying to write a macro that is able to take a "Part ID" from a column on Sheet "Temp", search sheet "Parts" for that "Part ID" in Column A, copy the corresponding description (listed in next column B) and paste that description into a third sheet "Sheet1" Column D. I would then need to repeat for all lines in sheet "temp"
I could most likely use an IF statement to do the search, but I was hoping to use excel's search function to make it quicker as there are over 1000 parts. For example:
Dim partID = String
Selection.Find(What:= partID, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
What I am getting stuck on is once the search finds my text in Column A of Parts, how to copy the Description in Column B into Column D of "Sheet 1". A sample file is attached. The output in Column D of "Sheet 1" should say in this example:
Circle
Square
Circle
Rectangle
I need a code that will search column A over multiple sheets for a user specified value through an input box. I then need this code to copy and paste the entire row to a new workbook titled "Batch Report" Anyone have any ideas? I have a code that will copy and paste only a few rows but no where near all of them, and I cant figure out why.
View 10 Replies View RelatedI want to search for some text in a file. If found, I want to copy that file into another folder. I'm using the code below to do half the job.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingscDesktop1"
.SearchSubFolders = True
.Filename = "*.htm"
.TextOrProperty = "Status Rekod"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For I = 1 To .FoundFiles.Count
'I want to use the FileCopy function here to copy the found files to
'C:Documents and SettingscDesktop est. How do I do this?
Next I
Else
MsgBox "There were no files found."
End If
End With
End Sub
I am pulling from odbc into an excel sheet
Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need.
Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
VBA to copy entire row in all worksheets in file based on criteria.
step1 Copy tab has criteria in cell c1
step2 search if this c1 value in each tab in column e or g or h
step3 check if column i is yes
then if criteria meet, copy entire row to copy sheet
I came across some similar posts in other forums which can do partial work but not entirely .
Note ; number of rows, columns and tabs varies in file
I am using excel 2007.
This follows on from my previous posting [URL] ..... which produced a solution using an ActiveX Combobox that unfortunately does not work on Mac PCs!
I tried to replace the ActiveX with a Form Control Combobox but could not make it work.
So I am trying to use the alternative of "find, copy and paste" the relevant information.
As shown on the attached 140207 FINDALL test.xlsm, I need to find all records containing whatever string is entered into the "Search" cell, and copy data form three columns onto the Entry sheet.
The User will then select whichever of the entries they want to use, which will populate the relevant cells.
Problem: The following Code is not recognising any of the data in the Column being searched.
VB:
Option Explicit
Sub FINDPARTS()
Dim ws As Worksheet, i As Integer, k As Integer, z As Integer, CL, myFind, CHOICE As Range, lr As String, lrG As String,
[Code] ......
Copy paste specific column with specific heading using macros. Roll No
Name
1
John
2
Abdul
3
Baig
1
I Want the Macro to find the column with heading "Name"
2
Copy the list from Name till the last Cell that is B1048576
3
Paste in Sheet2 Cell A1(Please see result in Sheet2)
From mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria
Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane
2.06.06.04.0Smith, John
7.010.02.06.0Tucker, Chris
19.039.05.017.0Sandler, Adam
15.011.06.010.0Iglesias, Gabriel
8.03.06.010.5Smith, Will
8.03.06.06.5Powers, Austin
10.025.07.09.0
I have a dictionary for which’s words I want to find poem verse pairs as references. I want to add 3 different verse pairs of poems as reference to each word from my wordlist. There are two worksheets: .......
View 9 Replies View RelatedI am trying to copy and paste Row by cell value. It is working fine when I am copying row from one worksheet by comboBox value to other worksheet. But problem is after updating data when I want copy back by cell value, it is showing "Run-time error '1004'" - Application-defined or Object-defined error. the code below is working fine
Private Sub CommandButton1_Click()
Dim sfind As String
Dim cl As Range
'check for a value & show message
Sheet = "Data"
Sheets(Sheet).Select
Application. ScreenUpdating = False
If Me.userIDCombo.Value = "" Then 'the textbox in userform
Me.userIDCombo.SetFocus
MsgBox "Please enter a Name to Update."
' show message if no Name Selected
Exit Sub
Else
sfind = Me.userIDCombo.Value.........................
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
a VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
6 worksheets ("Monday" ,"Tuesday" etc)
1 Worksheet (call it Main)
In the Main sheet let's say there are 3 column headings - Date, Inv No, Amount
I want to copy from the Main sheet to the appropriate day e.g if the dates in the main are13/01/10 and 14/01/10 then all the info pertaining to 13/01/10 should go to the Wednesday worksheet.
I need to be able to search column y and rows 5-100 and where cells contain "A" copy and paste entire row to row 110. I am guessing it is really simple but I am obviuosly missing something
View 3 Replies View RelatedSheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
View 2 Replies View RelatedI have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.