The number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I am working on multiple sheets that collate to an “averages” sheet. The Averages sheet would need to collate the information historically.
I need a code that can be assigned to a button so when it’s clicked, the figures for this week are added to the figures that were from last week. So for example.
Worksheet 10, Rows 12 – 20 have the data from the last 8 weeks.
Worksheet 09 has this weeks data and a button to push. When pushed it adds the data from this week to row 21 in Worksheet 10.
The following week the button would add the data to row 22 and so on.
Essentially each time the button is pressed it drops the information in a row one lower than the last time the button was pressed.
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies View Relatedhow to write a macro where I can select a row or rows (adjacent) press a button, and the secelected row(s) will shift down one row every time the button is pressed. I also need another button with a macro that shifts the row(s) up one row at a time. The following code works for shifting selected row(s) up, but I can't figure out how to shift multiple rows down a row at a time.
Code:
Sub RowUp()
Selection.EntireRow.Cut
Selection.Offset(-1, 0).Insert Shift:=xlDown
Selection.Offset(-1, 0).Select
End Sub
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
I am fitting 2 sets of data to match eachother. I want to have as much data as possible but only for the same dates of each dataset.
I have 4 coloumns.
Dataset 1: A is date B is data
Dataset 2: C is date D is data
I want to compare A vs B one row at a time. If they are not similar it should delete and shift up the values in A+B or C+D according to the lowest value (date) of A vs B.
Remember that if the macro just deleted and shifted up it should compare the same (undeleted) value against the new value that just shifted up in the other coloumn.
I am running excel 2007 and I have 23 worksheets in a workbook. I have no links or hidden rows or colums. I have no merged cells or comments. My biggest sheet is A1:
AW8096. I use VB macros to add lines and move data from one set of workbooks to this one.
I have built several sheets using this proceedure.
All of a sudden I get the error "Cannot shift objects off sheet" when I run
a routine I have 50,000 times. This even happens on new blank sheet so I know its' not on the sheet.
I have checked to make sure there are no hidden comments, row or columns. I have deleted most of the worksheets and I still get the error. I have made copies of the workbook and used different file types to save it. I can create a new black sheet in the workbook that is empty and the same thing happens.
The only way I can get it to work is to creat a new blank workbook and copy and paste the sheets into the new workbook. Yes I have serched the FAQ and knowledge base and tried all of those fixes as well.
I'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View Relatedcalculate the number of full rows in one data base located on one sheet X to determine how many rows the macro needs to extend on sheet B (sheet B is made only of formulas for data interpretation in sheet A.
View 14 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
The best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1
Price 2
Price 3FruitDeliciousPearStore 1
Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
I need to know how toformat my spreadsheet so it will automatically give me a new row when I reach the end of the column instead of having to hit insert row to add one.
View 2 Replies View RelatedI am trying to average different rows and columns within a larger block data set in a series. This data is from a 96-well absorbance microplate reader experiment. I only mention this to describe the raw data output I am dealing with.
Each set of data is in a 12 x 8 block with the next block below it with one blank row between. So I have a block of data contained between A1->L1->L8. The next block is contained between A10->L10->L17. This continues for a total of 28 blocks.
I want to take averages from rows or columns from each block and autofill them into a single column. So for example I'll need =Average(A1-C1) with =Average(A10-C10) below it and so on and so forth. My problem is that if I try to autofill from this already started column the third row will take the average of A2-C2 instead of A19-C19.
Is there a formula/script for me to skip the correct number of rows to the next data block?
I have attached my spreadsheet to this thread. I am using Excel 2013
FeS_Kinetics.xlsx
I have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23
Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
Attachment 301726
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I am an undergraduate biology major working on a geometric morphometrics project. It is focusing on wing asymmetry, so I have data for the left and the right wings for a sample population of 30 individuals. The data from the software is exported as a spreadsheet with two rows of data for each individual, since each wing was calculated separately, and my mentor has asked me to average the data for subsequent analyses in another program.
I'd like to do this easily with an Excel formula, but when I try to do the averages I'm having a little trouble getting the formula to carry on correctly. I need it to average, say, E2:E3 then the next cell average E4:E5, but instead the only thing I can get it to do is average E2:E3 then the next cell do E3:E4. Which obviously doesn't work for me, since E3:E4 is data from two different individuals.
Is there a way I can do this for my data? One of my spreadsheets is a 60x32 matrix of landmark coordinates, so I'd really rather not try to do all the cells individually.
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I am working with an excel spreadsheet. There is a column for "name", and then the next column is for medical condition.
If the same patient has multiple (say, 4) conditions, the rows for "name" are combined into a single cell(let's say, a cell going from row 2 to row 5, witha a single name in the combined cell) , with the next column having four different cells adjacent to the single cell (cell 2 has "bleeding", cell 3 has "fever", cell 4 has "diarrhea", and cell 5 has "rash"). Some patients have only single conditions, single cells.
Will this mess up COUNTS and COUNTIF?
Is there a way to split the combined cell2-5 for ''name" into four cells all containing the same name?
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
1. I have to hide rows using checkboxes
2. I have to copy visible rows (not marked ones) to another sheet in the same workbook. So far i have managet to creat this code for hiding/sowing rows:
I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
View 1 Replies View RelatedI have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
The below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....
I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code:
Sub test()
Dim j As Long, r As Range
j = InputBox("type the number of rows to be insered")
Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.