I am trying to search three columns on a worksheet, that contain a range of customers, product names and the amount of that product sold to the to the customer.
On a separate worksheet I have created a table, which I hope will show the customer, the product and the amount sold. So basically I need either a formula or piece of code that can match the customer and product, along with the amount sold and display it in one table. The data is by nature not kept in alpha or numerical order and my problem lies in being able to search through each row and extrapolate the necessary figure.
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
I have 180,000 names in a spreadsheet with unique codes for each, I need to search for names and find their code numbers, how can I do this over a series of 8 columns.
Code Name code Name code Name Code Name
I'll need to search columns 2, 4, 6 and 8 for the name?
I have 12 columns of numeric data in cells AA80 through AL80. Beginning with the cell on the far right (AL80), return the value if >0. Otherwise, proceed to the cell to the immediate left (AK80) and return the value if >0, otherwise proceed to the next left cell...all the way to AA80. I tried this by nesting IF functions, but have too many IF functions to nest. Lintcoop posted a similar thread in 2008 but with text data.
I've got a spreadsheet which lists reference numbers and a value of each one on for two different weeks which looks like this (please ignore the ....'s - I was trying to illustrate the colums clearly but the spaces seem to get removed when I post this)
What I want to do is compare the value for week 1 and week 2 for each reference number. The problem is that not all the reference numbers for week 1 will be in week 2, and not all the reference numbers in week 2 will have appeared in week 1. I would like to know if there's a way that excel can identify a specific reference number, search for the values for this in week one and week two, and display any differences between these, (e.g. on the above spreadsheet I would like to identify that ref 123456 appears in both weeks and that the balance is the same, reference 147258 appears in both but the value is different, and that reference 113456 & reference 978645 do not appear in both weeks).
Fall - Columns A-G Spring - Columns I-O Summer - Columns Q-W Unduplicated - Columns Y-AD
I am needing to take each student in the Unduplicated section and see which terms they attended. If they attended a specific term, I need to grab a piece of data from that term and put it in over in the undulicated area.
The only way I could think to do this is with three separate searches. This is probably grossly inefficient and so far it has not worked at all. I have posted below the code I am currently using. Again this code is not workin at all.
I'm looking to do the following below: column A would have numbers, column B would have words and a few columns over i would have the total of each same word
column A column B 60house 120car 30misc 52.25food 83.33gashouse 180.25 120.25housecar 120 25miscmisc 55 105foodfood 157.25 50.5gasgas 133.83
I have two sets of data, and one colum in each set is titled ID numbers. I would like to search both those colums and combine the matching ID numbers in one row?
If I'm using this function to find the specific text "EXPIRED" in the specified cells, how can I add additional cell ranges on the same sheet to this function?
I have an excel spreadsheet where the columns have the 12 months of the year in Row 1. What I need is code that will find the month (from the column) which I select (via a listbox in a userform) and then go down that column and move the data that corresponds to that month to the userform.
So, If I select January from my userform, all data below January will then be moved to the userform and the same thing will occur with each month I select. I know how to move the data from the sheet to the userform, I just don't know how to match my data with the selected month.
A | B _______________________ WD |100 From Bangalore CR |Hyderabad 50 CR |Mysore 70 WD |900 From Kolkata _________________________ and so on in A and B columns. In the C Column depending on the cell value I want just the places like Bangalore, Hyderabad, Mysore, Kolkata etc only to be displayed like shown below.
A | B | C ___________________________________ WD | 100 From Bangalore | Bangalore CR | Hyderabad 50 | Hyderabad CR | Mysore 70 | Mysore WD | 900 From Kolkata | Kolkata ______________________________________ The Places in column B are not at finite position and that is the big problem i am facing when using Left or Right function. Could anyone help me with a proper Excel function to get this done. The thing is the whole cells should be searched and accordingly the output should be obtained.
I have a column that is filled with text of varying lengths and I'd like to search through each cell in that column looking for a specific word or words. Unfortunately the length of the text varys greatly between each cell and there is very little uniformity so I need to be able to search through the entire entry in each cell and then highlight that row if a specific word or words are found.
I'd also like to be able to add a number "1" in another column on the same row if the search finds a word or words. Any help would be greatly appreciated.
If the cell only contains the exact word or string I'm looking for then it's easy but I can't figure out how to search through text in a cell that contains more than I'm looking for.
example: Lets say I'm loooking for "caught fire" column Q contains: 1 "The computer caught fire after several hours" 2 "A house on the hill caught fire"
If "caught fire" exists in the cell being checked, then highlight the row and put a 1 in a specific column, lets say J.
Would like to write an IF statement where it reads if any cells in a column are highlighted and gives the sum of those highlighted while ignoring the ones unhighlighted.
Is there any way to do this or an alternate method that would possibly work?
Concatenated cells. My issue is how do i search through a sheet with cell values that have been concatenated?
Lets take an example:
I would like to search for a string call sales in sheet1 which would display all the employees and schedules for that department (do note that employees can be part of not just one department). but my cell formatting is as follows:
Sheet 2, Column 1 Employee name
E.g. Row 2 Employee1
Sheet 2, Column 2 Department (cells concatenated)
E.g. Row 2 Sales, Marketing (Concatenated Cell)
Sheet 2, Column 3 Work schedule
E.g. Row 2 8 AM to 5 PM
So when you search for sales, it will display employee1 and work schedule.
I am trying to get the following equation to search for cells that contains the term 3R. The issue is I have several different 3R formations as follows and want it to count all of them.
3R 3R FIB 3R S Nasty 3R S Nasty FIB
This is what I am currently using but I want it to be more detailed. Where my search is for everything on 1st down with 10 yards to go in a 3R formation.
The following macro searches for missing combinations. This macro will search the complete list and will return any missing combination from "1, 2, 3, 4" to "7, 8, 9, 10".
I need to make some changes in this macro, so that it will search for missing combinations only within a specified range of cells (and not the whole list). For example (see excel file attached), I would like to place a search within range("G23:J183"), from combination "1, 2, 6, 9" to combination "4, 6, 8, 10". In this case, it should return only 9 missing combinations.
Attached File: Example Find Missing Combinations.xlsm‎
The following code works fine to determine if a particular character occurs within the selected range of cells:
Code: Sub CheckIfCharacterIncluded() For Each MyCell In Selection If InStr(MyCell.Formula, "#") Then MsgBox ("The " & "#" & " character was found in cell: " & MyCell.Address & " at position " & InStr(MyCell.Formula, "#")) End If Next End Sub
However, I would like to extend this functionality to check for multiple characters, using some sort of array that contains all the characters I want to check for e.g. "#","*","£" and so on, without having to repeat the above code for each character for which I need to check.
The easiest way of explaining what I'm after is to say, I have letters of the alphabet, in their own cells, and I want to find them by way of a search. I don't mind how this is done, but it would be good if for example you entered A, C and E, any cells containing those letters changed, maybe became bold, or the cell filled with colour.
I have a workbook with a macro that searches through worksheets to find certain values and place the location of the value in a worksheet cell. The following line ontains the found cell.
I need to search column C for the text "X". If an "X" is found, I need to copy the text from the cell directly left of it and paste it into a seperate worksheet into cell B2, then go back to the original worksheet and delete the cell with "X" on it and the cell to the left.
I would like to select all cells in column A that begin with the text "SP". Some cells will be contiguous but others will not. For instance in one case, I would like the macro to select cells with the text "SP" which would result in cells A1, A2, A3, A10, A15 being selected. I am working on building a macro that will then do other things to these cells/rows so this is the first step.
The below code will select the first cell with "SP". How would I alter this code to only search Column A and select multiple cells? or totally different code.
Code: Sub test() Dim r As RangeSet r = Cells.Find(what:="SP", LookIn:=xlValues, lookat:=xlWhole) If Not r Is Nothing Then r.Select End Sub
Column A & B has a list of Supplier Part numbers and Buyer Part numbers as below.
Supplier P/N Buyer P/N
HGFYE/12 111111
HYEYDH/14 222222
[Code] ..........
Cell D2 is an open cell that any data can be entered into as a search term. What I am trying to do is search for a Supplier P/N that have the characters "H", "G" or "E" in it, so entering "HGE" into cell D2 would display the results into columns F & G as below.
Supplier P/N Buyer P/N
HGFYE/12 111111
HDGTEY/56 333333
I can easily do a formula for 1 character or a string of characters.
To complicate it further, if the search term has in this example has "YFF", I would like the same formula/code to workout that the result in F & G should show this time
FROM: /// TO: /// Value 0 /// 25,000 /// x 25,001 /// 50,000 /// y 50,001 /// 75,000 /// z
etc etc.
I then have another table ( 2 columns) with the first column being inputed values from another worksheet. This inputted number will fall between one of the ranges. The second column needs to have the appropriate VALUE from the above, 3 column table.
How do I go about making a Vlookup that can find ranges between 2 columns? So if I have a value of 30,000, it will return "y".
I'm using the following code to delete select rows one at a time. I need the last row in the range to remain therefore I prevented the user from deleting the row one up from the row that contains "Total Hours" (which is always in Column B). The code works great as long at the user clicks into a cell in column B. If the user clicks into a cell in column A, C, D, E, F, G, H, or I then the code allows the user to delete the last row.
I believe I need to search entire rows to determine if the row contains "Total Hours" .
I'm trying to hide groups of columns on a dropdown change. I'm extremely new to VBA, so I'm having a bit of trouble understanding some things. Here's what I've got so far...
Code: Private Sub modeList_Change() Dim selectedMode As Integer Dim selectedOpp As Integer
[Code]...
I recognize my main problem is the assigning the multiple ranges to be hidden to the leadColsArray.
I have a list of several hundred columns, beginning with column "G:G", with varying numbers of rows of data in column - each row dipicting a monthly data point. I'd like to average the numbers in each column (need to average over the appropraite time-frame) and compare that average with the corresponding average (same time-frame) for benchmark (column"F:F"). The problem is I don't have the same number of data points in each column; some have data points for every month for the past 33 years, and some just a few years; almost all have differing beginning and ending dates as well.
