In the attached worksheet I am trying to create a range from
C4 to C12 (all the Officer Roles) and move it to Column E same Range
and
G4 to G12 (all the Officer Names) and move it to Column H same Range
I would need to do this for the entire worksheet. i.e. move all the Officer Roles over 2 columns and the Officer Names over 1 column.
I tried to piece meal it together from code I found here, but I am getting a "wend without while" error.
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View RelatedI found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedColumn A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
I've used the macro recorder to copy a cut and paste routine, but it won't play back correctly. Here's the macro I recorded:
View 7 Replies View RelatedI have data that I want to move to columns:
-----A
1 Apples
2 Bananas
3 Oranges
4 Watermelon
5 Grapes
6 Kiwi
It should move every two rows to columns, like so:
-----A------------B
1 Apples-------Bananas
2 Oranges -----Watermelon
3 Grapes-------Kiwi
4
Date
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
I started a project where I want to export data from Access (only 2 columns but # of rows vary every day). When the data that is copied to the first tab is a week old and is a Tuesday I want to copy and paste these values in the next tab.
View 9 Replies View RelatedI have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
how to write the following in a macro. The task is to have the macro compare both the SSN, amount, and date...if they match go to next row. If Mysoft side exists without a match on the OMNI side, then range for that A-D will be cut and moved to Mysoft Only worksheet and the cells below will be moved up....same holds true for the OMNI side.
I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.
I have a set of data that looks like this:
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
I have a report that I need to reformat where part of the information is moved from rows to columns.
The report is broken up into "sections" as follows: Each “section” is a series of multiple rows and is broken down as follows:
ROW 1: Contains data (in a single cell) about a Sales rep, which includes (1) rep number & (2) rep name
NEXT ROW(s): Contains data information about an invoice(s), which includes date, invoice number, client name, trans ID, etc. The invoice data can be one row up to as many as 500 rows
LAST ROW: Contains the Rep Subtotal
I need to spit out a report that contains the invoice data only (the middle part of the “section”). I don't want "ROW 1" or "LAST ROW" of each section in the output. For each invoice row, I need to include the rep number and the rep name for each invoice. As noted, the rep number and name is always listed in the row preceding the invoice data. The format is always a 6-digit code followed by the name. So I need to split the data into two pieces.
is there anyway to arrange pivot table columns without manipulating the field list items?
in other words, in older versions of excel, you could just right click the column and select move left, or move right
I need to move a portion of info over 4 columns. I need to do this after a certain criteria is met.
A B C D E
1 Mem# Mem Name Sta Area
2 123C Joe Smith G bev
3 4 Wine 4.95 6
4 5 wine 5.95 6
5 2 food 6.95 5
6 124G Fred Choi C Bev
7 4 Wine 4.95 6
8 5 wine 5.95 6
9 2 food 6.95 5
A3, B3,c3,d3 need to shift over 4 clmns then when nxt member #(a6) is met rows below need to shift over 4 clmns until nxt mem #, so on and so forth. Please Help. New to the macro scene.
We have to copy from lot of Java webpages
1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)
2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)
Here I tried some VBA but needs how to put it across....
I'm creating a mailing list by pasting text into a spreadsheet, then spending hours cutting and pasting the company name into column c, address into column d, city into e...and so on. Then move down 5 rows and do it again.
I'm not sure where to start, I recorded several macros but none have worked.
I have 2 large rows of data next to each other imported from a different programme. Some of the cells in these 2 rows consist of values, some consist of words. I only want to cut the cells with values in these rows and paste them in a new row, called TXid. I have written VB code that cuts all the data in the rows and pastes them onto the new row. Now I would like to cut only the values in the row. How do I select only the values in the cell?
Cells.Select
Cells.EntireColumn.AutoFit
Range("I1").Select
ActiveCell.FormulaR1C1 = "TXid"
Range("G3").Select
Do
If ActiveCell = IsNumber = True Then
Selection.Cut Selection.Offset(0, 2)
End If
ActiveCell.Offset(1, 0).Select
Loop Until ActiveCell = ""
Range("H3").Select
Do
If ActiveCell = Isnumber = True Then
Selection.Cut Selection.Offset(0, 1)
Loop Until ActiveCell = ""
The ActiveCell = Isnumber = true is not working the way I want it to.
I want to create a chart where I have 5 clustered columns, repeating 4 times(weeks). Each column(total invoices entered per user) has a error rate, which I would like to display as a line graph with markers. In other works, first column has its own line, second column has its own line etc. this spans the 4 weeks. When I create the chart now, ALL 5 the line markers are placed in the same one column. I can not move the line marker to sit on top of the column it is associated with.
View 2 Replies View RelatedSo, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).
The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.
I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.
if there is a method to save the time and not arrange them manually.
Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10
[Code]....
If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.
View 2 Replies View RelatedI am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
How can you move data from multiple columns into a single column? I have attached a short example of the data I receive. (In reality, the data could be hundreds of columns and/or hundreds of rows, but this is representative of what I might receive). It does not need to be sorted and including the header row in its own column is optional. I do not know VBA all that well but can muddle through it if someone can give me an example of what the code should look like.
View 5 Replies View RelatedI have two different lists that have some similar text and some irrelevant text. What I need to do is move the matching words from column B to the same row in column a and leave blank the rows that have no similar words. Column A will not move ...
View 7 Replies View RelatedI saw a post that needed a solution for moving blocks of cells in order to get fewer rows but more columns. The post is gone but I'd like to think my work wasn't in vain as the algorithm was more difficult than I thought. The problem was wanting make a 5000 X 4 grid into a 1700 X 12 grid, 55 rows and 4 columns at a time. This is sometimes done for visiblity or printing purposes to get more data going across instead of down. An example would be wanting to have more data accross on a print page and the page holds 55 lines of data.
For example, A56:D110 would be moved to E1:H55, A111:D165 to I1:L55, A166:D220 to A56:D110 etc. The code is somewhat generic so different blocks of rows and columns can be specified. To see this code work, enter the number 1 in columns A-D, then fill series -> step by one for a thousand or so rows. Then run the code.
Sub FewerRowsMoreColumns()
'Rearranges blocks of cells so the end result is more columns and fewer rows
Dim RowStop As Long
Dim ColStop As Integer
Dim RowStep As Long
Dim ColStep As Integer
Dim RowOffset As Long
Dim rw As Long
Dim col As Integer
ColStop = 12 'Enter the last column number you want the cells moved to
RowStep = 55 'Enter the number of rows you want to move at one time
ColStep = 4 'Enter the number of data columns you are starting with.....................
I have a 3 column table that goes:
FROM: /// TO: /// Value
0 /// 25,000 /// x
25,001 /// 50,000 /// y
50,001 /// 75,000 /// z
etc etc.
I then have another table ( 2 columns) with the first column being inputed values from another worksheet. This inputted number will fall between one of the ranges. The second column needs to have the appropriate VALUE from the above, 3 column table.
How do I go about making a Vlookup that can find ranges between 2 columns?
So if I have a value of 30,000, it will return "y".