A custom UserForm pops up when a cell is double-clicked. The form contains a ListBox that presents the user with a list of values to select. When the UserForm first pops up I want the item that matches the value of the activecell to be highlighted/selected.
View 8 RepliesHow to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........
I'm working on an excel table in which I have the following information:
Product
Date
Defect
Defect Picture
N65-P0421
09/15/2013
Broken tab
D:folderpicture.jpg
N65-P0322
09/16/2013
scratches
D:folderpicture1.jpg
I need a userform in which I choose the field "product" and it loads the picture from the path at "Defect Picture". Is it possible?
I have a userform with 5 listboxes on the first page, each with multiple options. They are all set up so any number of options can be chosen.
2 are populated by the 'add item' method, and the other 3 pull data from 3 columns of the database when it's initialised to ensure all possible options are included.
My question is this - as there may be many options in each listbox to scroll through, if someone wanted to search on all the options in the listbox, it would be easier to have a 'Select All' option at the top, but I have no idea if this is possible, let alone how to do this -
I've created a macro that loads a listbox with the sheet names from another workbook. It works fine with Excel 2007-2010 but some reason fails with 2013. It doesn't crash, it just doesn't add items to the listbox nor doest it add the caption to Userform1.Caption. It does launch the form. Here is the code snippet:
Code:
'open read-only
wbkpath = Sheet3.Cells(1, "f") 'full pathway to source workbook
Workbooks.Open Filename:=wbkpath, ReadOnly:=True
Set swbk = ActiveWorkbook
swbk.Activate
[Code] ...........
I need to select the row for the active cell without using an explicit RC address. I don't seem to be able to make the syntax work.
View 2 Replies View RelatedI have created a Excel userform. Since it has lot of controls, it takes good amount of time to load.
Is there a possibility of displaying a progress bar till the userform is loaded.
Google search has shown me ways to create a progress bar using Excel Forms. However, I am looking for a way to show the progress bar till the main userform is loaded.
The form is not uploading my dropdown box. I know I am missing something in the code, but I am not sure what.
View 4 Replies View RelatedI am trying to select a shape in a cell and place a cell reference into the shape. I know the cell address, but do not know the shape reference. (The row that the cell and shape reside came from copying the row from another sheet and inserting it into the current sheet). I can not seem to come up with the correct code to accomplish this. Right now I have:
Cells(r + 1, 48).Select
ActiveCell.Shapes.Select
ActiveShapes.Formula = "$AW:" & r + 1
Where r+1 is the row where the line finally resides after insertion and "AW" is the column to the right of the cell where the shape resides.
I have tried to put the cell reference into the shape at the location where it is copied from but the reference is not dynamic and I can not seem to get it to be. Another issue that will arise is that the rows in the new sheet will probably be sorted and I question if the cell reference will follow the shape's new location.
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedUsing vba how do I tell a macro to select the row that the active cell is in?
I'm just using a basic delete Row macro but I'd like for the macro to automatically select the entire row when it's time to delete instead of me highlighting the section.
If statement, any way where I can, when I run the macro, choose active cell?
Ex.
Start macro
and it will ask for active cell,
check if active cell higher then 0
then set cell to color red
I have this atm:
Code:
Sub LookForValue()
' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets
[Code] .........
What is the difference between the two ?
When should I use each one ?
I have created the attached spread sheet to work out and calculate gp on products. Sheets and userform1 are working perfectly how ever userform2 wont load and I believe its something to do with the named range? The idea for this userform was to select a product from combobox1 and then change the price on sheet1 and clear the price on sheet 2 in the different sizes.
Also userform2 i would like to create it so that if any of the fields are left blank it wont change price of selected field in sheet 1 and wont clear selected area in sheet 2.
Finally is there a way on userform1 to shrink the userform size depending on how many sizes are needed?
Attached File : NEW GP CALCULATOR.xlsm
I made a template file with a userform included to enter data into a protected sheet at the command of a button. When I open the template, everything works fine. However, when I use a macro to create a new workbook and import the template to create a new sheet (or several) the userform suddenly disappears! The template is saved as macro-enabled and the new workbook is saved the same way. What am I missing that I'm loosing the userform??
View 9 Replies View RelatedI want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedUserform Loading with database turns to close all Excelworkbooks completely
Database created in Excel worksheets to load and show in various different objects on userform. At present this project file size is approximately 2.5 mb and more to go as it is not yet complete. Now you can imagine how much big this project can be.
It uses various different types of objects such as listboxes with many columns, combo-boxes, textbox, checkbox and many. Every objects has its own style to display data on userform which is set in its properties itself.
Before loading userform to display, program creates database from manual entry (which is made by user on their working sheets) to database entry sheets (which is made to make compatible to show on userform). Upon loading, it also loads/populate all datas required in their objects to display.
All works perfect when I am in editing mode. It doesn't matter how big the database can be and works as required. This Project is now Password Protected and distributed among all staffs in our company to work with.
Error Occurs, when I tested in non-editing mode. The moment I triggered the macro to load the program, it takes some few times and pops-up with Excel Recover error message box asking whether to send Error Report and to whether recover & start Excel application again??
I don't know what is wrong. Sometimes it also run successfully when in non-editing mode even there is no changes in program codes.??
Sometimes I feel there can be a virtual memory issue, but my Pc is more than enough with 1GB ram. I hv also increased virtual memory limits and tested but all vain attempt...
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
I RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
I have a user form in which i want an active cell value when it is initialized, its a text box which should not be editable but should able to copy when its shown.
Code:
Receipt_Number.Text = ThisWorkbook.Worksheets("reference sheet").ActiveCell.Value
I have created a user form that has 6 input boxs and at the bottom of the userform has a seventh box that has a running total. I have two buttons one to "accept" and one to "cancel". My prloblem is creating the code to make it work correctly.
1) if a cell in B5:B20 become the active cell than the userform is to open up.
2) once the useform is open the user can input up to six different numbers into the input box's which will show the runinng total in the seventh box.
3) Once all numbers are inputed into the input box's the user can hit "accept" to post the total into the active cell or hit "cancel" and nothing have nothing happen.
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
I have 2 userforms. UF1 and UF2. UF2 has a rowsource set to its Listbox. UF1 has a search function that searches the original sheet. Now I want to double click on an entry in UF1's Listbox and select the same entry in UF2's Listbox. I want to then work with that entry in UF2.
[Code].....
I do all of this to circumvent Excels restriction. I can't search in a rowsource Listbox, but any edits done to my new Listbox wouldn't be made to the Excel sheet.
I have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
I have a sheet that inserts data into the next blank row. the offset 4 value is a date. Can i have it so when i click the date on this sheet it shows the userform.
what i cant get is how to do it since i dont know what row the date will be in.
I current have code that fills in textboxes in a userform with values in cells:
Code:
Private Sub CODE_Change()
Dim ws As Worksheet
Dim fm As Worksheet
Set ws = Worksheets(ActiveSheet.Name)
Set fm = Worksheets("Form")
[Code]...
How to I modify the lines under Checkbox1.Enabled = False so that they only take a section (of varying size) of the text in a cell and put it in textboxes in a userform?
ie. The text in a cell is "Outer: A123 ; Inner: B456." I would like A123 to appear in a textbox called OuterColor and B456 to appear in textbox called InnerColor
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
I am using a form which has 3 text boxes and a list box. How do I copy the selection of a list box to the text box based on my active text box. So, if I was in text box1, and I click a selection in listbox1, it copies that selection to textbox 1, etc.
View 4 Replies View Relatedhaving trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.