Excel 2010 :: Sort Growing Column Starting Under Header Row At Cell C5
May 7, 2014
find macros to sort fixed ranges but not an entire column with existing header rows from 1 to 4.
Added to that is the need to keep the code compatible with Excel 2003 even though I have Excel 2010 at office (it's a file that needs to be "openable" in both versions so the vb code needs to be in XL 03.
Column currently starts at C5 but goes down to C47, at this point. But it's a growing list. Some of the rows are blank at the bottom, too.
View 2 Replies
ADVERTISEMENT
Nov 1, 2011
I'm trying to do a vlookup but I want to be able to change the table array starting point depending upon a defined cell header. so
=vlookup(a1,sheet1!b1:c5,2,false) where b: would be defined by a header as
=vlookup(a1,sheet1!header name:header name+1,2,false).
So it will work much in the same way as match does for VLOOKUP
($A2,'Sheet 1'!$A:$FG,MATCH(AP$1,'sheet 1'!$1:$1,0),FALSE) but the array needs to change.
By doing this my vlookup will work automatically depending upon the header.
View 4 Replies
View Related
Sep 25, 2013
I am looking for some to create a simple macro to sort multiple rows in ascending order based on the values in a particular column in the selected range. I want to sort A4:AI1004 in ascending order by column D. I recorded the following macro in Excel 2010:
VB:
Sub sort()
'
' sort Macro
' sort by column D (Sequence #)
'
'
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
[Code]...
First of all, I think this code can probably be simplified. Secondly, it does not work in older versions of Excel. In 2007 it always ends in a runtime error. How can I clean this up so that it will work in both versions of Excel?
View 3 Replies
View Related
Apr 14, 2008
Came across a spreadsheet that my firm created, where you can click on the column header and it automatically sorts ascending order for the column without messing up the other columns. Then if you double click it again, it will sort in reverse order.
View 9 Replies
View Related
Apr 3, 2014
I want to rearrange(sort asscending) columns based on numerical value in column header string through VBA macro. Please check attachment.
i.e. (Present Data)
# A B C D
1 col.1 col.4 col.3 col.2
(Output Data )
# A B C D
1 col.1 col.2 col.3 col.4
test.bmp
View 2 Replies
View Related
Feb 26, 2014
I'm using 2010. When I highlight rows or columns and select Group, the show (+) / hide (-) buttons would appear in the next to or above the header rows/columns.
The file I am working on is not showing these buttons. If I go to the Data tab & click "hide detail" or "show detail", it will hide my grouping if I'm in one of the cells of the grouping.
I can easily hide/unhide, but would rather group & click rather than highlight rows/columns.
View 3 Replies
View Related
Apr 16, 2013
I am using Excel 2010. I am a novice user.
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d
[Code] .........
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d
[Code] ......
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d
So my table would show the name "data_out_reg" and the range of values 8-32
View 1 Replies
View Related
Jul 11, 2012
I have several long lists (each is 600+) of vocabulary words & definitions and need to alphabetize/sort the words, but need to keep the definitions w/ the words.
A1 = word 1
A2 = def. 1
A3 = word 2
A4 = def. 2
A5 = word 3
A6 = def. 3
Standard sort will alphabetize all rows & the words will be separated from the definitions. I could group rows 1 & 2 together, rows 3 & 4 together, etc. but that's clunky & time-consuming.
I'm using Excel 2010.
View 4 Replies
View Related
May 7, 2013
I have an array, say E6:E9. I have a single cell C6.
I want C6 to show an X, only if all E6:E9 have an X. If only E6 or E8 have X's, then C6 will remain empty. However if all E6:E9 all have X's, then C6 will display an X.
excel 2010
View 6 Replies
View Related
Oct 24, 2011
I have a filter on the Qty column but when I sort Z -A or A - Z it does not work. I have tried formatting as number but no success, I have never seen this before, why the sort wont work? I am using Excel 2010 in Win 7
View 5 Replies
View Related
Apr 24, 2014
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
View 6 Replies
View Related
Mar 10, 2014
I'm using Excel 2010). I have column I, which is the sum of columns A and B (first and last names of patrons), and I have used conditional formatting to identify all duplicates in column I with red text. I would now like a macro to find red text in column I and then delete the corresponding rows.
I've been looking around on the web for a while and have cobbled together this code stolen from other people's macros:
[Code] ....
When I run it, I get the following error:
Run-time error '1004':Application-defined or object-defined error
Excel doc is called "stupid mailing list.xlsm", sheet I want to run the macro on is called "voters".
View 1 Replies
View Related
Aug 10, 2012
Highlighed the Column and Row of the selected Cell. I have seen someone using it. Whenever he click on any cell the related column and Rows clour change. For Example if I select Cell B5. The Column B and Row 5 change its colur from B1 to B5 and Row from Column A to Column B. If this option is already available in office 2010
Column B
Row 5
View 3 Replies
View Related
Oct 2, 2012
I am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies
View Related
Nov 13, 2012
Is there a way to sort out the sheets into alphabetical order in excel 2010?
View 5 Replies
View Related
Dec 11, 2013
I have 5 worksheets that I currently have to add information to and cut/paste information from one to another. The initial information stays the same but I have to cut and paste it into one of the other worksheets based on wether or not we; need to decide on a job, are working on the job, lost the job, won the job or the job is complete.
I would like to create one master worksheet where the information can be entered with a drop down cell stating the status of the job (listed above). I created the master tab and linked the 5 subordinate tabs using an IF formula, but how can the subordinate tabs filter or sort the references and organize them on the top of the page rather than leaving a bunch of blank rows (because the info in these blank rows went to a different subordinate tab)? I want to enter the info in the master tab and simply change the pull down cell to change which subordinate tab the information shows up on. This should allow me to print the subordinate tabs as reports without having to manually cut and paste the info or filter it, correct?
View 5 Replies
View Related
Jan 3, 2012
I am trying to sort each "Pct" column in descending order. Of course, I can do this manually, but I have over 100 to do, so I'd like to know how I can automate this (of course, the two columns to the left of "Pct" must move along with it).
delete
EFGHIJKLMNOPQ8BallFrqPct
BallFrqPct
[Code]....
View 2 Replies
View Related
Nov 6, 2012
I've only recently began to use excel, but I've really dived deep into it, I'm clueless when it comes to VBA but now I'm stepping into that realm. Anyway, I'm using this code....
Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("A:A")) Is Nothing Then
Application.EnableEvents = False
Me.Sort.SortFields.Clear
Me.Sort.SortFields.Add Key:=Range("A:A"), SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With Me.Sort
[Code].....
Code:
Credits to VOG
Link: auto-sort for excel 2010.... to auto sort 2 columns of data. However, it is extremely tedious to enter data as it sorts itself every time you enter a new data point. Moreover, using any random number generator to fill the columns takes ages! Is there anyway to make it so the code only runs when the worksheet is refreshed (F9 pressed.)
View 2 Replies
View Related
Nov 4, 2013
See post below. I want to have the column listed as per to auto sort to the largest to smallest value. This value will change throughout time.
I have data in columns a-n and rows 3-14. I want column "l" or the 12th column to auto sort from largest to smallest value.
View 1 Replies
View Related
Nov 10, 2009
I have a macro that is copying information from one spreadsheet into columns "A through E" on the next available row in a seperate spreadsheet. Beginning with column "G through L" I need to copy the formulas from the row above in the same spreadsheet. Is there a way to do that since the row being copied from will change each time?
View 4 Replies
View Related
Apr 16, 2014
Excel VBA 2010.
I have this problem:
e.g Cells ""
C2 - 128.50 g
C3 - 211.01 g
C4 - 198.50 g
C5 - 179.34 g
I need to split the text into
Cell "C2" = 128.50 and Cell "D2" = g
Cell "C3" = 211.01 and Cell "D2" = g
and so forth
I wanted to avoid using delimited method with space and induce an automated method to format every cell of Column "C" one by one.
View 6 Replies
View Related
Nov 27, 2012
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
View 2 Replies
View Related
Jul 30, 2013
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
View 2 Replies
View Related
Jan 13, 2014
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab
001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
I think that I have explained what I need to do
View 8 Replies
View Related
May 2, 2014
I am currently using a pop up calendar in Excel 2010 that with CTL+SHIFT+B that a calendar pops up, you select your date, and then the calendar closes. What I now need is to write a code or formula or something that when I click in any cell in column F lets say that the calendar opens automatically in that cell and then still close automatically after the date selection is made.
View 3 Replies
View Related
Feb 25, 2014
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
View 2 Replies
View Related
Jul 8, 2014
I have a file which has in excess of 12,000 rows of data in 5 columns (sample file attached with fake data). The five rows are:
"First Name" "Last Name" "Name" (uses CONCATENATE to combine column A & B) "Email" "Date Attended"
There will be duplications in the list as people will have attended more than once over the years.
What I want to do is search through the email addresses (Column D with D1 being the header) and where there is a duplicate email address copy the cell to the right of the duplicate (F#) into the next available cell to the right of the first occurance and then delete the row with the duplicated email address.
I am on Windows 7 and Excel 2010
View 4 Replies
View Related
Jan 17, 2010
Attached is an example page. My goal is to be able to click on one of the header cells, and have it sort that column from high to low, and if I click that same cell have it sort from low to high. I know how to do this by making a command button, but, I want to do it by clicking on the cell itself. I just dont know how to do the onclick to execute the code.
View 3 Replies
View Related
Jul 19, 2007
what is the code to sort a spreadsheet in VBA code by HEADER rows?
i have 2 rows i want to sort by: first by Column D row 1, then by column C row 1.
Cells.Select
Range("C1").Activate
Selection.Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:=Range("C2") _
, Order2:=xlAscending, Header:=xlGuess, OrderCustom:=1, MatchCase:= _
False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, DataOption2 _
:=xlSortNormal
Range("C2").Select
selects all cells, sorts, then de-selects.
View 3 Replies
View Related
Dec 11, 2012
My file is set up like this:
Deal Jan Feb Mar....... Dec
A 0 11 0
B 0 0 23
C 13 0 12
and so on
Meaning deal A got cash of 11 in Feb and B of 23 in March
For a certain month (which could change), I want to specify the most recent month of a payment and return the month
So in April, row A returns 2, Row B March and Row C March
View 2 Replies
View Related
