If i have row 10-20 in column A filled, what vba code would i need to select a range in column C that selects rows 10-20
If that 10-20 rows in column A chnages to say 10-50 the vba code will select 10-50 in column C
I have a list of data in colum A and I want to group them together.
In column D I number the group with the same number.
A1 = Tony D1 = 1
A2 = Tom D2 = 1
A3 = Bill D3 = 1
A4 = Helen D4 = 2
A5 = Marg D5 = 2
A6 = Kathy D6 = 2
A7 = Catherine D7 = 2
And so on..... The list up to 100 names
As you can see group 1 = 3 names, group 2 = 4 names, group 3 = 6 or maybe 7 and so on.
I'm trying to set ranges for them Eg:
set rng1 = A1:A3
set rng2 = A4:A7
but it not fixed to set ranges like that. It's variable and changes every week. Next week maybe rng1 = A1:A5, rng2 = A6:A9.
can I have the VB code to determine these variable ranges.
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedI'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies View RelatedI have a sheet that begining in A3 and going down need to look for the First Instance of the text String "Loan Documents" and down to the last instance and select the corresponding range in column B.
Example: if the Text String appears in Range(A14:A32) I need the Range(B14:B32) to be my selected range.
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I have defined my last row and column by using:
lr = Sheets("week1").Cells(Rows.Count, "A").End(xlUp).Row
LC = Sheets("week1").Cells(1, Columns.Count).End(xlToLeft).Column
Now how do I select the range starting at A2 through the last used column ( LC ) through the last row ( LR )?
What is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI have a spreadsheet with employees and data listed. The drop-down in A1 lets someone select the employee and then it hides the rows for all other employees. I want to add the names of supervisors in the drop-down of A1 and have it select only the employees under that supervisor and hide the rest. The number of employees under each supervisor ranges from 3 to 6. This is what I have to hide the rows when selecting a single employee :
[Code] .........
My workbook has stats data on the "Master" sheet(sheet #1) and analysts and supervisors on "Analysts" sheet(sheet #12). Data validation for cell A1 on "Master" sheet has all the analysts and supervisors in the first column of "Analysts" sheet with title "Select Analyst" in cell A1. I modified the "Analysts" sheet to show supervisors from B1:I1 and listed the analysts in the appropriate columns below them. Not sure how to make it select the analysts when someone selects the supervisor on "Master" sheet .
I have a sheet with entries dated. With values next to them.
From 1/11/08 to Whenever it ends.
I would like to work out a function to select the activerow(depending on cell)
and the 30 rows under it and then print them.
Like a report almost
This could be a button or anything, no pref on it ^^
I wish to collect an arbitary range of data in a column. Hence I wish to identify were the data begins (for example C10) and where the data ends (for example C22), and then copy it and paste it at another sheet. How to do that with VBA-code?
View 9 Replies View RelatedI'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedHow would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
Sheets("Sheet1").Select
Range("W1").Select
Range(Selection, Selection.End(xlDown)).Name = "Problem_Area"
I want to introduce a number in the textbox1, and that number sets which entire row to select for making a chart. i thought of something like this, but i cant put the variable x just like that.
Private Sub CommandButton1_Click()
Dim x As String
If TextBox1.Text <> "" Then
x = TextBox1.Text
Range("Ax:Mx").EntireRow.Select
[Code] .....
I have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.
1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.
How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.
setup:
Columns: c)6:00 AM, d)6:15 AM, e)6:30 AM
Rows: 4)tech1 Phone, 5)Tech2 Phone, 6)Tech3 Phone
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedCurrently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
I am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View RelatedI want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I have tried a few other examples in previous threads that use COUNTIF and ISERROR but I just can't get it right.
Basically I want to average the cells in column J (J2:J6,J8:J12,J14:J18, etc).
My aim here is to determine the average value for each day (Averaging 0 values in this instance is OK).
Now, the date in column A (A2:A6,A8:A12,A14:A18, etc) sometimes returns a blank value, depending on the day of the week (see attached example). This is because, in the full version of the workbook, I have Column A date linked to a perpetual calendar and therefore the dates can change cells depending on the year.
For the Date Cells that return a blank value, I do not want the AVERAGE equation to include the 0 value on these days.
For an example I have attached a month of February where there are blank date cells at either end of the column.
I need command that takes in consideration values from column F only if in column B is value 4.8. And than, I need minimum value of those taken in consideration .d.png here is attached picture regarding my problem.
View 8 Replies View RelatedMy workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View Relatedi have a excel sheet which i use to schedule my service team. Basically i have horizontally the dates ((a colum for every day of the year) and vertically the guys names (about 25 rows).
I would like to add a function so i can push a button and i automatically print the past, current and next week of my shedule on one page.
In addition it should print my usage chart which is on a different work sheet in the same file.
I need to write a couple of functions. Firstly I want to do a count on column B (project $) depending on the criteria on column A (project description). For example a total count of all values in col B if project description is "P" or "A". [I can do sumif functions but this is a countif and I cannot get this right].
View 4 Replies View Related