I need to select the last cell on a worksheet - that has actual data entered. Note: The "ActiveSheet.Cells.SpecialCells(xlCellTypeLastCell);Activate" - will select the last cell ALLOCATED from memory - i.e. - the last cell that USED to contain data - pior - to being erased. What I am looking for - is the last CURRENTY OCCUIPIED cell with any real data entered.
View 2 Replies
I am trying to copy/paste the same data range from many sheets into a summary sheet.
Specifically, I'm attempting to copy (B697:G710) from 100 or so sheets into the summary sheet, one after another
I don't know much about VBA and am using the macro recorder. Unfortunately, when I attempt to paste the data from the next sheet to the summary sheet, it overwrites the info from the prior sheet. I have attempted using the down arrow and Ctrl downarrow but the recorded macro continues to select the same cell in the summary sheet into which it pastes the data.
I have a row of formulas that reference other sheets in my workbook (i.e. Cell A4=Sheet2!A1, Cell B4=Sheet2!B1, etc). I need to have VBA find the last cell in that row with data. I tried "End(xlToRight).Column" but it goes all the way to the end because all of the cells have formulas. I need to find the last cell that is empty of data or maybe >0 would work.
View 9 Replies View RelatedI'm looking to take some data from a selection of about 5 or 6 cells in a row, and use them for some formulas. I can only get as far as selecting the 5 cells.
If I have a row of 5 cells selected, how to I save each cell as a different variable? Does this make sense?
Cell 1 = number1
Cell 2 = number 2
etc..
I want to select them as a row to keep them all in one group. I don't know if this is correct or not.
In a particular battery sizing workbook I have 3 data tables on each sheet (Sheet2, Sheet3 and Sheet4) The table range is d22:u45, the same on each of these three sheets. What I would like to do is to when any one of three cells (labled "Sheet2", "Sheet3", or "Sheet4") is activated on Sheet1, transfer the data from that reppective sheet table range d22:u45 to the same range d22:u45 on Sheet1. And let me use that data in the Sheet1 worksheet subroutines.
View 2 Replies View RelatedI am using excel to stop and start a service on the network and have that part done when using a txtfield to enter in the PC ID. What i want to do is use a list of PCIDs and pass them to my service object to stop and start the service.
Private Sub CommandButton1_Click()
Worksheets("PCIDs"). Range("B2").Select 'my issue is here
Range("B2").Activate 'and here
Do Until IsEmpty(ActiveCell)
Call StopService("ServiceName")
ActiveCell.Offset(1, 0).Select
Loop
Range("B1").Activate
Do Until IsEmpty(ActiveCell)
Call StartService("ServiceName")
ActiveCell.Offset(1, 0).Select
Loop
Worksheets("ServiceName").Select
End Sub
and with this function i need it to pass as a string to txtDeviceID. I have tried just simply setting txtDeviceID as ActiveCell but it didn't like that.
Public Function StopService(ServiceName As String) As Boolean
Dim oSysInfo As New ActiveDs.WinNTSystemInfo
Dim oComp As ActiveDs.IADsComputer
Dim oSvcOp As ActiveDs.IADsServiceOperations
Dim sCompName As String
Dim sSvc As String
Dim lRet As Boolean
I have a big spreadsheet that has 30 columns. The data is downloaded from an SQL database from time to time. The row identifying data ( the record number/key ) is in the left most cell. I often have to move over 10 to 20 columns to view some other data in the same row. I can do this by selecting the preset Excel row number which higlights the whole row and then use the lower slider bar to go to the correct column to view the data.
However if I wish to select an item of data ( or update a particular cell ) then I loose the highlighting for that row and I can "loose" which row I am on. ( maybe I'm stupid but it does happen ) Can I use Conditional formatting to highlight a row whenever I alight on any data in that row and it sttays highlighted until I select another value on another row?
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I have two workbooks. I am copying cells data from one workbook A to workbook B with macro - pretty easy. Now, after selecting and copying cell data in workbook A and switching to workbook B I want to be able to pause the macro and wait for the user to chose a correct cell where he/she wants to paste the data. After the selection the macro would automatically paste the data in selected cell. Since I am completely newbie any help would be appreciated. Here is the macro I have so far :
Sub CopyVIN()
'
' CopyVIN Macro
' Macro recorded 5/26/2009 by Pacific Coachworks
'
Sheets("Sheet1").Select
Range("G9:R9").Select
Selection.Copy
Sheets("For copying VIN").Select
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
Selection.Copy
Windows("Cami's Production Schedule.xls").Activate
' Here I'd like to have a code for waiting for a user selection and pasting the data automaticlly.
End Sub
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
i have data on firms for six years as the following :
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
how can i select the data for first year for each firm.
I have a database (spreadsheet) which has 3 to 4 dozen columns of data. This data is in Sheet 2. On sheet one I would like to have a form which organizes the data on one sheet from sheet 2. I would like to have a drop down box to select the country. Once country is selected all data to the right of country would then be automatically filled on Sheet 1. see attached example.
View 2 Replies View RelatedI have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
View 10 Replies View RelatedI am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View RelatedI have a matrix with numbers that each cell is composed by a function of two parameters (two columns). The formula is
"=COUNTIFS(T2:T99,"15",V2:V99,"14")",
So it's counts when in one cell column I receive 15 and in the other 14. For instance, I receive the number 3 - so I have three rows that match (the first column with 15 and the second with 14).
I want, when I select the cell from the matrix (table) with the number 3 (that I receive from the formula) it will highlight the relevant rows..
I want to display the first value in a row in a specific column of cells.
Example: Row 5 contains data in columns E thru L
Row 6 contains data in columns G & H
Row 7 has data in only column I
I want to display only the first value in each row in column B according to row. if this is not clear enough please let me know and I will try to clarify.
I want (using keystrokes only) to Save As my workbook with the data in a certain cell. However, when I select this cell, and then ctrl + c, it copies the cell (not just the data inside), and so it doesn't let me paste this as the name of the document. Does anyone know how to use keystrokes to highlight the data itself in a selected cell.
View 3 Replies View RelatedI have a range c10:c300, i want to select the range where i have data.
E.g. I have data in c10:c50, then select the range c10:c50
I have a spread sheet that we input data on and produce a simple graph. When I started we plotted these graphs by hand on chart paper. When we started using spread sheets I learned how to graph the problem is these guys we have working in the field don't know how or care to learn how to make a simple xy graph.
Six months ago I started automating a workbook so our field guys could just plug in numbers and have the needed graph, I put check boxes to select the points to calculate the slope and intercept. I hard coded to plot to say line 21 then at the end of the test we always have a zero point that we don't plot so I put that on line 22 then have a macro to hide everything before I print it.
I think I would like to dynamically select the data for graphing but I'm not sure about the best way to do this. My first thought is to key on the x axis column with a loop and graph data from zero until the x looses value.
I have a 23 sheets in a workbook and in each sheet i have around 1200 to 2500 data.
What i want is : from active sheet i want to open another sheet which is located at my desktop and should select column A, H & I all data (whether it is blank at last not to worry) and paste it into my active sheet in column A,B & C then i also have formula to calculate saving per shoe in column D,E & F.
For column D,E & F in active sheet the formula should fill down until the column A gets blank (For example : in column A,B & C under active sheet takes 1230 products so formula of the column D,E & F will end at 1230 row)
I have tried to record macro for the same but this is only for the restricted rows i.e. no. of row so I post it now.
make a code that will select all cells with data?
View 9 Replies View RelatedI have a large spreadsheet of species activity data and want to separate information from two columns to create a bar chart of when a certain species is active over a 24-hour period. There are duplicates of each species in one column and a unique corresponding time of activity for that species in another, something like the following:
Species A 23:01
Species B 07:09
Species C 13:45
Species D 08:30
Species A 01:55
Species A 22:07
Species C 15:29
What formula can I enter that only selects Species A and their corresponding times that I can copy into a new spreadsheet?
I am looking for some code that would copy lines of data if the following to criteria are meet into anouther workbook caller YTD at the bottom of the data to provide a YTD summary.
If column h if marked "y" and todays date ( currently have a =Now() ) is 7 days or more thaen copy and paste to new workbook removing it from the current sheet.
I need to select all data in columns A:F but the number of row containing data is variable. I need to select only the rows with data.
View 7 Replies View RelatedI have data validation on all the pages in my workbook. How do I edit all the data validation at once.
View 4 Replies View RelatedI am pretty much a novice at this whole excel / vba stuff, but I have been trying! unfortunately I have now got well and truely stumped! I require the macro to perform a loop and once saved the first row of data, select the next row of data (in exactly the same way) until it reaches the last row. The macro I have created does the first part fine, but I have reached the end of my knowledge base!
Below is the macro I have created:
Sub TEST_1()
'
' TEST_1 Macro
' Macro recorded 20/08/2009 by ..........'
'
Sheets("Input").Select
Range("A1:CI1").Select
Selection.Copy
Sheets("Results").Select
Range("G3").Select
ActiveWindow.LargeScroll ToRight:=7
Range("G3:CO3").Select..............
