I have a row of formulas that reference other sheets in my workbook (i.e. Cell A4=Sheet2!A1, Cell B4=Sheet2!B1, etc). I need to have VBA find the last cell in that row with data. I tried "End(xlToRight).Column" but it goes all the way to the end because all of the cells have formulas. I need to find the last cell that is empty of data or maybe >0 would work.
View 9 RepliesI am trying to copy/paste the same data range from many sheets into a summary sheet.
Specifically, I'm attempting to copy (B697:G710) from 100 or so sheets into the summary sheet, one after another
I don't know much about VBA and am using the macro recorder. Unfortunately, when I attempt to paste the data from the next sheet to the summary sheet, it overwrites the info from the prior sheet. I have attempted using the down arrow and Ctrl downarrow but the recorded macro continues to select the same cell in the summary sheet into which it pastes the data.
In my macro, I need code that will select all the rows that contain data in a given column, minus the first row which has a header.
View 6 Replies View RelatedI have worksheet with data . Everytime number of rows with some data in it changes . Like sometime there are 100 rows with data or other tome it may be 57 only. I want to write VB code to select only those rows which have data. Thereafter I will use Pivot Table code to get required information. I know VB code to generate Pivot Code. But what happens is that if any blank row gets selected in data range for Pivot Tables, thereafter grouping by "Month" is not done.
go through attached file? In Module 1 ( which contains macro ) instead of R1C1:R8C4 , I want range with data only.
I have a button set to bring up an inputbox. enter serial number.
What I need to do is enter the serial number and then have the macro look through a
single column of values to match it then go to that row.
This seemed so simple I thought I could get it but alas here I sit...
I have tried to search the forum for a similar code but haven't found one that was close enough to make sense to me. I have ut together alot of individual actions, but how to get the value inputed to "search" the column and once found go to that row.
I also need to make sure it accounts for new rows being added in the future. (no set row range)
I have two worksheets. ws1 contains a large number of dates on column 3. ws3 contains around 20 dates on column 3.
I want to pick two dates randomly in ws1 that does not already exist in ws3.
Here is my working code, but it is really slow to process. How to optimize this code? Also I would like to add a function where if the macro is not able to find two random dates that aren't already in ws3 then exit loop.
VB:
Set ws1 = thisworkbook.sheets(1)
Set ws3 = thisworkbook.sheets(3)
lr = ws2.Cells.Find(What:="*", After:=[A1], SearchDirection:=xlPrevious).Row
Set rvis = ws2.Range("c2:c" & lr).SpecialCells(xlCellTypeVisible)
mynodate = 0
[Code] .....
I am trying to write the code to;
1) change to a different sheet
2) select a specific cell range
3) save that range as a text / xml file with a filename derived from a cell outside the given range
Here is where I have got to so far, but it fails
Private Sub Export_Click()
Sheets("Parsed Data").Select
ThisFile = Range("B1").Value
ActiveWindow.SmallScroll Down:=-15
Range("A1:A41").Copy
SaveAs Filename:=ThisFile, _
FileFormat:=xlTextMSDOS
Application.WindowState = xlMinimized
End Sub
I have a large database of equipment on one sheet and an input form on another. For inventory control, when a user scans a number into the input form, the main inventory sheet is updated with the current location. I have it working using functions, but I need to do this in VBA. I am looking to do the following;
User enters 2222 on the input form. The code matches 2222 on the inventory sheet, moves the activecell 10 columns and updates a value in that cell. Cell A2343 is "2222" then Cell K2343 is changed to "WAREHOUSE 4". What is the best way to find the match and then select that cell in VBA?
I need to select the last cell on a worksheet - that has actual data entered. Note: The "ActiveSheet.Cells.SpecialCells(xlCellTypeLastCell);Activate" - will select the last cell ALLOCATED from memory - i.e. - the last cell that USED to contain data - pior - to being erased. What I am looking for - is the last CURRENTY OCCUIPIED cell with any real data entered.
View 2 Replies View RelatedI'm looking to take some data from a selection of about 5 or 6 cells in a row, and use them for some formulas. I can only get as far as selecting the 5 cells.
If I have a row of 5 cells selected, how to I save each cell as a different variable? Does this make sense?
Cell 1 = number1
Cell 2 = number 2
etc..
I want to select them as a row to keep them all in one group. I don't know if this is correct or not.
In a particular battery sizing workbook I have 3 data tables on each sheet (Sheet2, Sheet3 and Sheet4) The table range is d22:u45, the same on each of these three sheets. What I would like to do is to when any one of three cells (labled "Sheet2", "Sheet3", or "Sheet4") is activated on Sheet1, transfer the data from that reppective sheet table range d22:u45 to the same range d22:u45 on Sheet1. And let me use that data in the Sheet1 worksheet subroutines.
View 2 Replies View RelatedI am using excel to stop and start a service on the network and have that part done when using a txtfield to enter in the PC ID. What i want to do is use a list of PCIDs and pass them to my service object to stop and start the service.
Private Sub CommandButton1_Click()
Worksheets("PCIDs"). Range("B2").Select 'my issue is here
Range("B2").Activate 'and here
Do Until IsEmpty(ActiveCell)
Call StopService("ServiceName")
ActiveCell.Offset(1, 0).Select
Loop
Range("B1").Activate
Do Until IsEmpty(ActiveCell)
Call StartService("ServiceName")
ActiveCell.Offset(1, 0).Select
Loop
Worksheets("ServiceName").Select
End Sub
and with this function i need it to pass as a string to txtDeviceID. I have tried just simply setting txtDeviceID as ActiveCell but it didn't like that.
Public Function StopService(ServiceName As String) As Boolean
Dim oSysInfo As New ActiveDs.WinNTSystemInfo
Dim oComp As ActiveDs.IADsComputer
Dim oSvcOp As ActiveDs.IADsServiceOperations
Dim sCompName As String
Dim sSvc As String
Dim lRet As Boolean
I have a big spreadsheet that has 30 columns. The data is downloaded from an SQL database from time to time. The row identifying data ( the record number/key ) is in the left most cell. I often have to move over 10 to 20 columns to view some other data in the same row. I can do this by selecting the preset Excel row number which higlights the whole row and then use the lower slider bar to go to the correct column to view the data.
However if I wish to select an item of data ( or update a particular cell ) then I loose the highlighting for that row and I can "loose" which row I am on. ( maybe I'm stupid but it does happen ) Can I use Conditional formatting to highlight a row whenever I alight on any data in that row and it sttays highlighted until I select another value on another row?
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I have two workbooks. I am copying cells data from one workbook A to workbook B with macro - pretty easy. Now, after selecting and copying cell data in workbook A and switching to workbook B I want to be able to pause the macro and wait for the user to chose a correct cell where he/she wants to paste the data. After the selection the macro would automatically paste the data in selected cell. Since I am completely newbie any help would be appreciated. Here is the macro I have so far :
Sub CopyVIN()
'
' CopyVIN Macro
' Macro recorded 5/26/2009 by Pacific Coachworks
'
Sheets("Sheet1").Select
Range("G9:R9").Select
Selection.Copy
Sheets("For copying VIN").Select
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
Selection.Copy
Windows("Cami's Production Schedule.xls").Activate
' Here I'd like to have a code for waiting for a user selection and pasting the data automaticlly.
End Sub
VBA Code which would ask me to select a value between N or S.
If I select "N" then the pivot field items "Guj","Del","Mum" should get selected.
If I select "S" then the pivot field items "Bng","Kar","KER" and "TIR" should get selected.
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI record macro and hit select all and that action won't record. what's the macro code for select all in excel. i assumed it was the same as word
selection.wholestory
but it's not
Is there a simple bit of code which I can add to a button which will always select the next tab along?
Looking to add a 'next tab' button at the top of each sheet so it can be run through quickly, almost as a presentation.
I could just do
Sheets("TabName").Select
But that would involve doing a new one for each sheet, and would need modifying if I then re-ordered the sheets.
What would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View RelatedI have a code that gives me path of all files inside a folder. I want to modify it.
I want to select files (individually or in group) inside a folder and then get the path. All files are .xlsx in folder.
[Code] .....
I thought i would create some code to highlight a batch of cells so i can modify formatting all together rather than cell by cell
I am unable to get the generated code to select all ranges together, it only shows the last range
Here is my code
Code:
Sub SelectRanges()
'
' Macro1 Macro
'
'
Range("D12:H12").Select
[Code]....
I have a workbook and have created a filter across range A1 - BU1. I want to filter column BQ. In this column I want to use the filter to show all values except for 0.
View 2 Replies View RelatedI have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies View RelatedI have been recording different sets of commands then copying/pasteing them together to complete what I want. I have tried to clean it up as best I can but im sure it does things it does not need to. Is there a way to tell it to select all sheets in "Book2.xls" then remove the formatting (font color,comments,shading) rather than using the Array and naming each and every sheet?
What this will end up doing is openeing about 12 files, copying specific tabs from each of those files and pasteing them all to the same workbook (in this example it would be Book2). Then removing the formatting.
Workbooks.Open Filename:="F:123Book2.xls"
Windows("Book1.xls").Activate
Cells.Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Copy Before:=Workbooks("Book2.xls").Sheets(1)
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Cells.Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.ClearComments
I have created the following code by recording a macro. The ActiveCells (“A1.A5203”) were based upon the actual number of records at that time. I wish for this macro to be used in a template and the actual number of records will vary from time to time. What do I need to add to this code to allow the AutoFill function to operate and fill only the actual number of records that exist.
ActiveCell.FormulaR1C1 = "=LEN(RC[-2])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
ActiveCell.Offset(0, 1).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]=8,""0""&RC[-3],RC[-3])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
I have a macro which when run firstly unprotects the worksheet, makes a change,then protects the sheet again with line of code below.
Sheet.Protect Password:="whateveritis"
What do I need to add to that to ensure that it allows selecting unlocked cells only.
I have made a sheet where the user can insert/delete rows in a certain intervall of rows. The upper row is 17, that is I have named the cell "First" and then the last row "Last" and then I am using integers:
Dim intStartrow As Integer
Dim intLastrow As Integer
intStartrow = ActiveSheet.Range("First").Row + 1
intLastrow = ActiveSheet.Range("Last").Row - 1
So it is only possible to add/delete rows if the markerer is in between the above rows.
Now I would like to select the rows, from first to last. Since the rows are never the same, users add and delete rows all the time, I can not use
Range("A17:Z49").Select
Can I somehow make a range selection using the Integers, somethimg like
With ActiveSheet
Selection."intStartrow:intLastrow"
End With
I am adding shapes with text (msoShapeOval) to an image on a worksheet but I cant get the size of the "ShapeRange" to work dependant on the value assigned to "sTxtlen".
I had msgbox's within each Case but none were triggered allthough using another msgbox to show the length of sTxtLen is correct prior to the Select Case.