Paste Formula To Specific Row In Active Column
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Using Column Numbers: Paste The Workdays Of An Entire Month In A Specific Row Of A Worksheet
My macro's function is to paste the workdays of an entire month in a specific row of a worksheet. Everything seems to work except using a number to reference the column in which to store the values. I've searched the web for over an hour and found two "solutions": 1. write a function to convert column number to a letter 2. utilize Cells object #2 seemed more efficient but the function is giving me the error: "Runtime Error: '1004': Method of 'Range' of object "_Worksheet' Failed"
View Replies!
View Related
Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen: That active cell's row is hightlighted. Any cell in that column that has the same value as active cell is also highlighted. Plus, any cell in another sheet that has that value it's row is highlighted too. Example: I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Replies!
View Related
Insert Row At Active Cell With Formula From Fixed Row
I want to insert a new row that contains the formulas of a fixed row (1:1). The inserted row is changeable and is determined by whichever is the current active cell. Eg: Active cell is something random like E16 I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
View Replies!
View Related
To Highlight Active Row And Column
I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10. Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range) Dim i As Long Cells.Interior.ColorIndex = xlColorIndexNone If Application. CountA(Target.EntireRow) 0 Then i = Target.Row Else For i = Me.UsedRange.Rows.Count To 1 Step -1 If Application.CountA(Me.Rows(i)) 0 Then i = i + 1 Exit For End If Next i End If Rows(i).Interior.ColorIndex = 6 End Sub Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
View Replies!
View Related
Use Active Row In A Formula
I am wanting to use the row number of the current active cell in another formula on a spreadsheet. I have only been able to find info in putting the active row number in a dialog box. Is there a method of returning the active row number and using in a number of formulas.
View Replies!
View Related
Find Specific Cell, Copy Row And Paste Into New Sheet
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G. Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
View Replies!
View Related
Set Variable To Row & Active Cell Column
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub But I receive this error: Run-time error '91': Object variable or With block variable not set
View Replies!
View Related
Copy & Paste Specific Column Based On Cell Reference
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date. Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
View Replies!
View Related
Column Header Of Specific Value In 2nd Row
Have a set of dates as column headers across a worksheet. Rows are product names. When a product is delivered, the cell is marked "delivered" for the date (in the column header) it was delivered. Need a formula that will look across each row (product), and return the date of the first cell with the value "delivered". I have: =INDEX(F19:AS19,1,MATCH("delivered",F19:AS19,0)) <for row 19. right now, but its just giving me "delivered" as the value and I cant figure out why.
View Replies!
View Related
Condition Paste Formula In Column N Based On Column A
I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" . I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.
View Replies!
View Related
How To Paste Figures From Column To Row
I have 2 spreadsheets, one is on crew costs and the other one is a summary page. On "crew cost" worksheet, say A1= IBM, B1 =Microsoft, C1=HP and D1=Pioneer. I want to link A1 to D1 to cells A1 to D4 on "summary page". However, I do not want to use "paste special", "transpose" function as I may need to add in columns to "crew cost" spreadsheet. Instead I hope that I could link A1 on "crew cost" spreadsheet to A1 on "summary page" spreadsheet. Then I hope to drag the formula from A1 down to D4. The result will be A1= IBM, B2 =Microsoft, C3=HP and D4=Pioneer on "summary page" spreadsheet. However, it does not work as dragging only occurs through columns or through rows. Is there any formula that I can use?
View Replies!
View Related
Paste Values To Last Used Row In Column
I have three sheets in my excel workbook. In second sheet, I have a simple If condition that checks to see if new items from Sheet1 meet a condition (eg, if startdate from sheet1 = today()). I am trying to copy the cells from column A and paste the values in my other sheet. I want it to append after the last cell in column A of my sheet 3. Sub CopyNewCRs() Sheets("Sheet2").Select Range("A2").End(xlDown).Select Application.CutCopyMode = True Selection.Formula = Selection.Value Worksheets("Sheet3").Activate Sheets("Sheet3").Select Set myRange = Sheets("Sheet3").Range("A2").End(xlDown).Offset(1, 0) Worksheets("SDP_CR_Status").Range("myRange").PasteSpecial xlPasteValues, SkipBlanks _ :=True, Transpose:=False End Sub
View Replies!
View Related
Macro When Selected Will Take Me To A Specific Row And Column In Another Worksheet
I want to create a macro that when selected will take me to a specific row and column in another worksheet, this will be the outcome of two cells, so far i have it to take me to the row but no reference to the column can anyone help. code i have so far. Sub Find_Todays_Date() Dim FindString As Date Dim Rng As Range FindString = Sheets("Dynamic Whereabouts").Range("B1:B1") With Sheets("whereabouts 08").Range("A:A") Set Rng = .Find(What:=FindString, _ After:=.Cells(.Cells.Count), _ LookIn:=xlFormulas, _
View Replies!
View Related
Color Row If Cell In Column Contains Specific Word
I've been trying to come up with a conditional that will format a row if a cell contains any instance of a given word. I know the following will format rows containing the EXACT entry of "apple" in column E: =$E1="apple" But I'd like a conditional that will find entries like "apple pie" and "crabapple" as well. I'm sure it's a simple solution, using a SEARCH function or something...but I can't figure it out.
View Replies!
View Related
Color Row Where Cells In Column Contains Specific Word
I have a spreadsheet with 12 coloums. In the last coloum are the ords "yes", "no", or is empty (null?). I need to find a way to have each row that contains the word "no" or is empty to be highlighted in red font and bold type. When the word "yes" is typed then the font is black and the type in normal. This allows me to see at a glance what orders have not been picked up or have problems.
View Replies!
View Related
Paste A Value Within A Row Based On Column Lookup Containing Dates?
I'm looking to create a small section of VBA code on Excel 2007 that looks for a specific date on a column and then pastes a value on the correct row. I have weekly dates in columns along the top of my spreadsheet on row 3: C3 = 07/11/08 D3 = 14/11/08 E3 = 21/11/08 etc... The row further down the spreadsheet that I wish to use is selected by previous code and could be any row number within column B. I need a snippet of code that searches for a particular date along row 3, and then once it finds the correct column, it pastes the value in the corresponding cell on my active row. For example, if my active cell/row happens to be on B18, and the date I'm looking for happens to be on L3, I need to paste a value into cell L18. I imagine there needs to be some form of HLookup, but I've no idea how to implement this in VBA code.
View Replies!
View Related
Copy/paste Row To Another Sheet Based On Value In Column
I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
View Replies!
View Related
Find Text In Column, Copy Next Row And Paste In New Sheet
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data. Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000) Now, an explanation of the data: 1) I work for a small bank (CORP) that takes deposits and gives loan. 2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers. 3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit. 4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same. So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
View Replies!
View Related
Paste Values To 1st Blank Row Of Column In Different Worksheet
I have a template with data only in column B, with fields going down the rows. I'd like to copy B2, B4, B6...B24 to the next blank row (so the values need to be transposed to a row vs. column) in a Consolidated Workbook. Here's what I have so far: NextRow = Worksheets("Sheet2"). Range("A1000").End(xlUp).Row + 1 For a = 2 To 24 Step 2 Worksheets("sheet2").Cells(NextRow, a / 2) = Cells(a, 2) Next a Except that the formula above pastes the first value in column B of sheet2, any ideas on how to get it into column A? Worksheets("sheet2").Cells(NextRow, (a / 2)-1) = Cells(a, 2) gives an error. Also, instead of sheet2 in the same workbook, I need to paste the data into sheet2 of a different workboook (i.e. Main, located in My Documents.)
View Replies!
View Related
Macro-Copy&Paste Fixed Data Ranges Into Last Empty Cell Of Specific Column
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format. I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings. (1) Name (2) Address (3) ID# (4) Control# Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.) Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups. MAIN DATA (columns A-D) Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN) Lawyer1… Lawyer9 Compliance1… Compliance9 Finance1… Finance9 Support1… Support9 MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot. The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group. I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data. Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots. I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data. So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
View Replies!
View Related
Cut & Paste Macro: Move Address From Column To Row
I have an excel worksheet with contact info in columns rather than rows. For example, C1R1 is company name, C1R2 is address, C1R3 is City/St/ Zip, C1R5 is phone. I recorded a macro to cut and paste address to C2R2, C/S/Zip to C3R1 and phone to C4R1. That works but I cannot repeat it as I move down the list. Just re-runs macros over same cells all the time. How do I get it to start and run wherever I want it too? Also, how would I get it to delete the now vacant rows?
View Replies!
View Related
Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30) After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred. Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that. Sheets("ee template").Copy After:=Sheets(3) ActiveSheet.Unprotect Selection.ClearContents Range("I7").Select Selection.ClearContents Range("C7").Select Sheets("source").Select ActiveCell.Offset(0, -11).Range("A1").Select
View Replies!
View Related
Copy Formula Rows & Paste Values To Last Row Of Another Worksheet
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View Replies!
View Related
Vba - Formula Based On Used Column + Paste Values
1. In this formula in column C, below, i have A2 as the look up... sometimes this will be A3 , A7 or other... how can i vary this formula? I've tried it all ways. Range("C2:C" & LR).SpecialCells(4).Formula = "=VLOOKUP(A2,Data!$A:$B,2)" It need to be inserted based on the first cell in column A which has a value. 2. after this has done its thing... how can i paste the values to ONLY those cells which have been affected by the formula. I don't want to copy, paste special the whole column as there are sub total and other exciting things included.
View Replies!
View Related
Identify Active Cell And Use The Column To Add Formula To Another Cell
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted. I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank. What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added. In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
View Replies!
View Related
Formula To Go Through Each Row And If The 2nd Column Is Yes Then Return The First Column
I have a collection of data like the following: Week1 | yes Week2 | no Week3 | no Week4 | yes Week5 | no ... Week28 | yes I need a formula to go through each row and if the 2nd column is yes then return the first column. I could then copy and paste this formula into a the next cell, add an argument saying the returned value cannot be the same as the previous ones, and so on. Essentially this is a series of nested IF statements. However, Excel prevents more than 7 statements from being nested, when I need all 28 to be searched. I cannot think of a way to get VLOOKUP, INDEX & MATCH, or defined names to make this work, because it needs to step through each row.
View Replies!
View Related
Use The Results Of A Formula As Column/row Numbers In Another Formula
I have two cells. The first cell has the formula: =CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0")) which results in a col and row number (such as D65). The second cell has the following formula: =INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2) ^^ I wish to replace the 'D1" in the Match function with the results of the first cell's formula. I assume Indirect would work, but I don't know how to code the formula to use it.
View Replies!
View Related
VB - Paste In Last Active Cell
I'm working on this Macro process - and I can't figure two things out. 1) How do I get it to past contents in the second blank cell at the bottom of a list in a specific column? IE - data in B1:B17, paste new list in B19. What I'd REALLY like, is for it to paste in B8, but if B8 used, THEN paste to the second to last blank cell in column B. (if thats even possible) 2) I have VB open an excel workbook, grab data, copy and then past into 1) (above), but then close that workbook. However it always asks "do you wish to save?" and "Do you wish to keep data on clipboard" How can I program it to say "no" for both of these windows prompts? Here's an excerpt of my code:
View Replies!
View Related
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Macro Code Only Works If Specific Worksheet Active
I have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping: Sub FormattingAcutalReport() Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls" Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls" Dim myBorders() As Variant, item As Variant Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
View Replies!
View Related
Copy The Information From The Row Directly Above The New Row And Paste (values, Formulas, Formats, Etc) Into The New Row
1. In whatever cell is selected when the macro is run, enter a new row. 2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row. 3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc. I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
View Replies!
View Related
|
TRACKER
