Selecting Next Empty Cell In Column
Feb 12, 2010I would like to select the next empty cell in columb A after running this macro, what code do I need to add to this to enable that.
View 2 Replies
ADVERTISEMENT
Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?
May 8, 2014I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
Selecting All Data In Specific Columns Without Selecting Adjacent Column
Mar 10, 2014Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
Macro Selecting Data In A Row With Empty Cells
Jul 9, 2013I have to select and cut a column with on several lines empty cells. I use the following code
'Range("c2", Range("c2").End(xlDown)).Cut' but this code select only the data till the first empty cell.
How can I select the whole column till the last cell. The column B is filled with data on every row so I think that I have to use the offset code.
Finding And Selecting Last Non-Zero Cell In A Column
May 20, 2014I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance
2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
VBA - Selecting The Last Cell In A Column With Data
Oct 6, 2008I am trying to write some VBA code to select a range in a column going down to the last item in the column.
So I want to write a macro that will copy cells B4 - B17 into cells A4 - A17 but am having trouble with the code that will select B4 - B17. When I use the usual code which is as follows:
ActiveSheet.Range("b4", ActiveSheet.Range("b1").End(xlDown)).Select
it selects down to A75, and I know why this is but not how to fix it.
This is raw data extracted from a third-party system. It has an option to export to Excel, but where it appears to have blank cells Excel actually believes there is data in there.
So is a way to identify what data Excel thinks is in there and perhaps use this to be able to select the range I want?
Different extractions will need a different range moved over - however it will always start at B4 and go down to B-whatever.
Selecting Cell At Row/column Intersect
Jan 12, 2007The match results are posted on another sheet and the winner allocated the letter W and the loser allocated L (in the sample workbook attached these are on sheet2 cells B1 and B2 with the winners name in A1 and the losers in A2, i.e. Bill and Susan) I have the code for this working properly.
What I need to do next is transfer the W and L onto the grid in sheet1 and insert the W in the cell that is the intersection between the row with the winners name and the column with the losers name. Then insert the L in the cell that is the intersection between the row with the losers name and column with the winners name. I hope that makes sense!
If it is simpler to insert the W and L into the grid directly from the winner and loser names in sheet2 col A rather than allocating the W and L in col B first, then that is great.
Selecting Alternative Cell In A Column And Paste
Aug 27, 2009I am trying to write a macro, where I want to pick up alternative cells in each column from Sheet 1 and then Paste in Sheet 2. Each column starts with end of every year ( 31st Dec 1996 and so on. My data in sheet for each average column (for different years) is like this.
Average
Closing Price 26.47
Stock Return -0.68
I want the value for stock return to be pick up different columns ( for each year) then paste in sheet 2.
If Cell In Column T Is Empty Use Column U (but Make It Negative)
Mar 13, 2014Formula for this? If a cell in column T is empty, use column U (but make it negative)??
View 2 Replies View RelatedAdd Value To 1st Empty Cell In Column
Sep 26, 2007I want to have several buttons, that put a certain value in the first empty cell in a specified column in antoher Woorksheet.
View 9 Replies View RelatedVBA Macro Code To Copy Cell A1 And Paste In First Empty Cell Down Column D?
Jul 30, 2013Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedHide Row If Corresponding Cell In Column C Is Not Empty?
Sep 3, 2012I want to hide the row when value "x" is entered in column C
I tried this code in the sheet, but nothing happens.......
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 3 Then
ThisRow = Target.Row
If Not Target.Value = "" Then
ThisRow.EntireRow.Hidden = True
End If
End If
End Sub
So when a "x" is entered in cell (115,C), row 115 must be hidden. When a "x" is entered in cell((9,C) row 9 must be hidden to, and so on. When a cell in an other column is changed, the macro does not need to start.
VBA - Paste In First Empty Column Cell?
Dec 9, 2011I need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.
'
Sheets("tis").Select
Range("AC2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("SORT").Select
'I need the code to paste my selection in the first available empty cell in column A, so I don't overwrite any existing values in column A
End Sub
Finding Next Empty Cell In Column?
Mar 23, 2012This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
If Cell In Column Empty Shift Row Right
Jul 23, 2013I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
Adding Sum At Each Empty Cell In A Column
Mar 21, 2014I have a column of data that I need to add sum total whenever there is a break in data. The row will vary on a daily basic so a set autosum will not work if I am summing 4 numbers today and 5 tomorrow.
This is what I have: the header titled Sizing is in cell C1 and the remaining data is below that, where I show a space below that is where I have an empty cell.
Column C
1
SIZING
2
320
[Code] ......
What I need is code to sum where there is a blank cell.
Column C
1
SIZING
2
320
[Code] ...........
Vba To Select Next Empty Cell In A Column
May 28, 2007How do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
Populate Empty Column With Value From A Cell
Aug 5, 2007I need a macro to do something very easy. I have blocks of data in an excel worksheet separated by one column. The First block begins in column B and ends in col G. Next block begins in column H and ends in L.
I'd like to copy the value from the first cell in the start of each block (b1) and paste it in the left column seperating each block (left empty column - a1) all the way down to where the data in that block ends (b60), and do this for the next column. So in the above exmaple it would populate column A (range a1:a60) with the value from cell B1.
The number of columns is the same but the number of rows vary. The value to be copied is always in the first row and first colunm of where a data block begins - so in the case above - b1, h1 etc.
Find Next Empty Cell In Column
Apr 24, 2008I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
ActiveCell.Offset(1, 0).Select
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSH#########SPREAD########OUT FWD########REV########OUT REV########Delay########1617Start10:55:09*10:55:27 *10:56:24 *10:56:26 *10:56:19 *10:56:28 ####10:55:59 18W-U10:55:180.40010:56:23 0.01710:56:24 0.03310:56:26 0.01710:56:27 0.01710:56:28 0.03310:56:30 19MTT10:55:26######*0.000*0.000*0.000*0.000*0.000*20**0.000*0.000*0.000*0.000*0.000*0.000*21****0.000*0.000*0.000*0.000*0.000*> Excel Jeanie HTML 4
Find Empty Cell In Column
Sep 12, 2006I want to use the Find method to find an empty cell in the first column. But at the top of the data taqble, there are some empty cells, so I don't get the one I want. So I thought about searching in the column 1 excluding the first cells. Here is my
Dim rFoundCell As Range
Dim rFilledCol1 As Range
'I define the column excluding the cells that contain empty cells
rFilledCol1 = Columns(1) - Range("A1:A10")
Set rFoundCell = rFilledCol1.Find(What:="", After:=Range("A11"),
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
But I get a Syntax error. Do you know why?
Find 1st Empty Cell In Row From A Column
Oct 25, 2006I am trying to find code that will find the first empty cell in a row and add data in cell left to right. This code is filling all data in the last cell of the row and I am hoping to have it loop through data and fill the first empy cell (M1) and next data placed (m2) and so on
Sub Reportdates()
Dim Grid As Range, Gridcell
Dim Crit1 As Range
Dim Crit2 As Range
Set Grid = ThisWorkbook.Worksheets("sheet3").Range(" dates")
Set Crit1 = ThisWorkbook.Worksheets("Stageing").Range("J1")
Set Crit2 = ThisWorkbook.Worksheets("Stageing").Range("K1")
For Each Gridcell In Grid
If Gridcell.Value >= Crit1 And Gridcell.Value <= Crit2 Then
ThisWorkbook.Worksheets("Stageing").Range("M1").End(xlToRight).Offset(0, 0) = Gridcell.Value
End If
'Exit For
Next Gridcell
End Sub
Goto Last Empty Cell In Column A
Jan 18, 2007I have a multi- sheet Excel workbook and I need to develop a macro based control that, with a single click of a Button in a sheet named REPORT, will take me directly to the last empty cell in column A of a sheet named REGISTER in the same workbook.
View 2 Replies View RelatedSelect Non-empty Cell In A Column
Feb 5, 2007create a code such that it will select a cell which is not empty and display the content in that cell. For example , in the attached file below i would expect output to be cells(2,5) = 12 and cells(4,5) = 13
View 2 Replies View RelatedRow Number Of 1st Empty Cell In Column
Jan 23, 2008MATCH(3, A:A, 0) will return the row number with the first number '3' in column A. I need to search for the first empty cell in column A.
View 2 Replies View RelatedRun-time Error 1004 (founds An Empty Cell The Value For One Cell Is Copied To The Empty Cell)
Feb 26, 2009I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
Add Text From Specific Cell To Next Empty Cell In A Column
Oct 29, 2008I am trying to create a macro that will allow a user to click a button, enter a text string that will be an email address into a field and have it added to the first empty row in column A or column C on sheet 1. I have not been able to record this with the macro recorder. The input box will be in cell E9 on sheet1.
View 7 Replies View RelatedFill An Empty Cell With First Data Cell In The Same Column, Next Row(s) Down
Sep 19, 2009I am looking for advice on how to move cells containing data (columns D to K in EXAMPLE A), upwards so that the information lines up with data already existing in columns A to C (to be included as part of an overall VBA routine).
In the upper example data in cell D2 needs to move upto D1, E3 to E1, F4 to F1, G7 to G1 etc and K9 to K1. Now, data on following rows is to move upto row 2 eg: E5 to E2, F6 to F2, G8 to G2.
The first 'block' of data starts at row 1 and finishes in this case at row 9.
The next 'block' of data starts at row 10 and finishes at row 18.
Row 19 shown is the start of the next 'block'. These 'blocks' may have upto 20 rows ....
Find The First Empty Cell In A Column On One Sheet?
Mar 18, 2014I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
using this formula:
=offset((LOOKUP(1E+307,'[PO Log.xlsx]PO Log'!B:B)),0,-1)
But I keep getting an error popup.
Macro - Move To Next Empty Cell In A Column
Sep 30, 2010In columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.
When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.
When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.
Return Value Of Last Non Empty Cell In Column With Blanks
Aug 24, 2008find out the last blanck cell in the row. ex: 1 2 0 5 6 0 0 5 0 zero it means blanck i prefer using fx function but i can use also Macro
View 6 Replies View Related
