Selecting Worksheets Array When #of Worksheets Will Vary

Apr 26, 2006

How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...

View 3 Replies


ADVERTISEMENT

Selecting ALL Worksheets In Activeworkbook As An Array

Mar 21, 2008

I recorded the following macro to select all the worksheets in the Activeworkbook by clicking on the first worksheet and then hitting Shift Tab and selecting the final worksheet (thus '[Group] selecting' all worksheets in the active workbook).

Sub Macro1()

Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets("Sheet1").Activate
Range("A1:B2").Select

End Sub
How do you generalise the Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select if the number and names of worksheets varies from workbook to workbook?

View 9 Replies View Related

Macro: Selecting All Worksheets

Jul 16, 2007

I am currently working on a simple macro to help with formatting a spreadsheet. The number of tabs on the spreadsheet will change to reflect the number of companies I'm running reports for. But the same process is to be applied to each tab. The issue I'm facing is I don't know the appropriate code to select all tabs without specifically referencing them.

The code that I would like to apply to all tabs is as follows:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$85"
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = ""
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = ""

View 9 Replies View Related

Selecting Multiple Worksheets - Sort All

Mar 14, 2012

The code im using all worksheets. How do I make this sort all but the first

For Each WS In ActiveWorkbook.Worksheets

If WS.Name "Sheet1" Then

Range("A1:X2270").Sort Key1:=Range("A2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal

View 1 Replies View Related

Selecting Range Variable In Different Worksheets Within Same Workbook

Aug 22, 2014

I want to make a range variable ("testrange") that I can use to define a range of non-continuous cells and then use that range variable to select that range of cells in different worksheets within the same workbook.

I tried the below code (simply coloring cells red), but get an error when I try to select "testrange" after moving to the next worksheet.

[Code] .....

The next worksheet is also supposed to have the same range of cells colored red, but I can only get it to work on the first active sheet.

I would like to avoid having to repeatedly rebuild the range I want selected each time I move to a different worksheet.

View 7 Replies View Related

Selecting Variable Worksheets - Debug Error

Mar 19, 2012

I have below code which I was thinking is very simple to select variable worksheets. However I get Debug error when running:

Code:

Dim rng As Range
Dim cl
Set rng = Sheets("Budgetted sku's").Range("A2:A24")
For Each cl In rng

Sheets(cl.Value).Select
Next cl

View 5 Replies View Related

Selecting Between Two Worksheets Based On Cell Entry?

Jul 12, 2012

I have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.

View 1 Replies View Related

Array Of Worksheets

Feb 20, 2008

when you specify an array of worksheets, do all worksheets have to be found for particular command to work? for example if your array was:

worksheets(array("bob","john","mary","alice")).copy

and your file only contained sheets for bob and alice, would the copy command work for the sheets that were there? so, would these sheets be copied into a new book?

if not, and all sheets have to exist, what method will work when only part of the possible array of sheets exist?

View 9 Replies View Related

Counting Worksheets Array In A Workbook

Jul 21, 2007

I need a macro I have created to count the number of worksheets that exist in the workbook and save it to a variable. I have hardcoded what I need to get done below. I need to clean up sheets in an array that is greater than 3 (so any sheets that exist after the 3rd worksheet will be deleted) This needs to be done as part of an import process to safeguard from users importing different files more than once.

Sub clear_sheets()

Dim shts As Long
' count worksheet array here and save it to variable

For shts = 4 To 12 'variable will be used here instead of number 12
Sheets(shts).Select
ActiveWindow.SelectedSheets.Delete
shts = shts + 1
Next shts

End Sub

View 8 Replies View Related

Array That Consists Of 120 Worksheets Within A Workbook

Aug 14, 2007

I have an array that consists of 120 worksheets within a workbook.

For example: Array(A,B,C,D,E,F,G...etc) for all the worksheets

Can I condense the array or change the format so that I do not have to list all of the worksheets every time I reference the array?

View 9 Replies View Related

Fill Array By Looping Worksheets

Aug 23, 2007

I am trying to write code that will loop through one sheet, fill an array and then use that array to populate cells in another sheet. I have a sheet with group names in column A, then in column B through Column IV there are the members of that group. There may be no members in a group or every cell through Column IV could contain data. I need to loop through each row, one at a time, see if a cell contains data, if it does, put it in the array, if it's empty then the array is done for that row. I then need it to go to another sheet and dump that data, however, now it needs to drop it in five consecutive cells in a row, then drop to the next row for the next five cells, etc.

Once this is done it then goes back to the first sheet, drops to the next row nad starts over.

I know how to loop through the rows, I just am not sure how to fill an array using variables for rows and columns. i.e., I can't say fill array with b1 to b30 instead I have to say fill array with intRow,intFirstColumn through intRow, intLastcolumn.

View 6 Replies View Related

Copy All The Worksheets From A Specific Folder Into An Array

Jul 12, 2009

I am attempting in the code below to copy all the worksheets from a specific folder into an array (for later manipulation), not to a single worksheet, The files open correctly, but the reading of the worksheets into the array is my downfall....

Sub FindOpenFiles2()
Dim FSO As Scripting.FileSystemObject, folder As Scripting.folder, file As Scripting.file
Dim directory As String
Dim wksht As Worksheet, i As Long, wkshtnames() As Variant
Dim wbNew As Workbook

directory = "C:Users"
Set FSO = CreateObject("Scripting.FileSystemObject")
Set folder = FSO.GetFolder(directory)

For Each file In folder.Files
Workbooks.Open file
Next file
For Each wksht In ActiveWorkbook.Worksheets
i = 0
i = i + 1
ReDim Preserve wkshtnames(1 To i)
wkshtnames(i) = wksht.Name
Next wksht

View 9 Replies View Related

Dynamic Array Of Worksheets Matching Condition

Jun 13, 2007

im currently using a static array to select multiple sheets at once which works alongside another Sub

Sheets(Array("Group1", "Group2", "Group3", "Group4")).Select

i have a button that creates a new sheet and names it "GroupX" X being the next number, it automatically adds on the right number by itself and it works fine...
i want it my array to be dynamic so that i dont have to manually edit the array and the macro every time i add a new sheet.

i have tried things like:

Dim MyArray As Variant
Dim Shts As String

K = Sheets.Count - 4
For p = 1 To K

Shts = "Group" + p

Redim MyArray(K) As String

MyArray(K) = Shts

Next p

Sheets(MyArray(K)).Select

View 9 Replies View Related

Excel 2010 :: Sort Worksheets Alphabetically And Keep The Data In Worksheets

May 15, 2013

I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.

View 2 Replies View Related

Loop Through Worksheets Not Working (delete Some Hyperlinks In Column A On 50+ Worksheets)

Jan 16, 2009

Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?

View 2 Replies View Related

Copy Cells / Range From Worksheets Positioned Between Two Worksheets

Jul 7, 2014

Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)

What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).

But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.

Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".

View 4 Replies View Related

Loop Across Worksheets: Perform The Same Process To All The Worksheets In My Workbook

Aug 10, 2009

I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:

View 2 Replies View Related

VBA To Count Number Of Worksheets Between 2 Worksheets?

Jul 21, 2014

Instead of just counting all worksheets I want to count the number of worksheets between 2 control worksheets (Start and End). Reason for this is that I have a Workbook that grows weekly and each new worksheet is inserted after "Start". I have a macro that lists the Worksheet names but it grabs all and I only want those between Start and End.

View 9 Replies View Related

Clearing Data In All Worksheets Except Last 2 Worksheets

Nov 10, 2006

I need to write VBA code to clear all Values, all values beginning with an = sign for eg = 9725, except formulas and text on all my worksheets, except the last 2 worksheets.

View 9 Replies View Related

Copying Data From Multiple Worksheets To Multiple Worksheets In Another Workbook VBA

May 14, 2012

I have 2 nearly identical workbooks and I need to update historical data from the old workbook into the newer one.

My current Coding Snippets that I want to use look like the following:

Code:
Sub UpdateWorkbook()
Dim ws As Worksheet
Dim r1 As String
Dim r2 As String
Dim r3 As String
Dim r4 As String
Dim r5 As String
Dim r6 As String

[code]....

Now, this code isn't working I suspect because the Copy and PasteSpecial Functions don't work the way I wish to.

View 4 Replies View Related

VBA Selecting A Variable Array

Apr 3, 2009

I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.

View 2 Replies View Related

VBA - Selecting Sheets In An Array

Aug 29, 2007

I am trying to clean up a macro a little that used to look like the following:

Sub Refresh()

Sheets("Sheet2").Select
ActiveSheet.QueryTables(1).Refresh BackgroundQuery:=False
ActiveSheet.QueryTables(2).Refresh BackgroundQuery:=False
Sheets("Sheet3").Select
ActiveSheet.QueryTables(1).Refresh BackgroundQuery:=False

I want to set up an array and have the code run through a loop and have gotten stuck on the following:

Sub Refresh()

Dim i As Integer
Dim SheetName As Variant

It does not seem to want to go from the first sheet to the second. What am I doing wrong/what can I do better?

View 9 Replies View Related

Selecting Nth Row Number Of Repetitive Value In Array

Mar 25, 2012

I want to find the row position in an array.

1 200 CAR 001
2 230 CAR 002
3 400 TRUCK 001
4 200 BUS 001
5 250 CAR 003
6 250 BUS 002
7 200 BUS 003
8 730 CAR 004

in 4th column it should say that this is "n"th position of 3rd column value.

ex.
in 4th row 3rd column 1st "BUS" appears. hence column 4 is 1
in 6th row 3rd column 2nd "BUS" appears. hence column 4 is 2
in 7th row 3rd column 3rd "BUS" appears. hence column 4 is 3

tell me how to automate this

View 1 Replies View Related

Selecting And Deleting Array Sheets Macro

Jun 15, 2012

Here is my macro

MyFileName = Sheets("Macros").Range("B1").Value
MyFileNameTwo = Sheets("Macros").Range("B2").Value
Sheets("Blank").Select
Sheets.Add After:=Sheets("Blank")

[Code] .........

Issue with array that's bolded The way it is set up is to rename the 3rd sheet to MyFileName and rename the last sheet to MyFileNameTwo. The file names will remain constant. They will always be the 3rd and last sheets, but the number in between will vary. Is there anyway to select the 3rd sheet through the last sheet to delete these? When I use the array it wants sheet names but those are based on multiple variables in other workbooks.

View 3 Replies View Related

Fill Array From Range Selecting All Rows And Some Columns

Jul 21, 2014

I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.

Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?

View 3 Replies View Related

Get Text To The Right - Length Will Vary

Feb 8, 2011

If I have a cell with this info: [6126]BOB SMITH

What formula can I use to get BOB SMITH. The length of the name will vary. The number will change, but will always be 4 digits and will have the brackets. [XXXX]

View 8 Replies View Related

Vary Data Marker Size By Value?

Apr 17, 2014

Is it possible to vary the size of data markers (eg spots) in a chart by their value?

View 2 Replies View Related

Vary Columns Based On A Number

Feb 5, 2009

You can always add numbers together. however, how can you vary columns based on a number?

for example, i can always do things like the following to change the number of rows selected in a column based on the variable numRows.

View 2 Replies View Related

Vary Source Data Via Combo Box

Feb 23, 2007

I'm trying to amend a chart via combo box. Cell C15 returns a dynamic named range, based on a vlookup.

My problem is in having the code pick up the value that C15 returns, rather than the formula in it.

Set rng = Sheets("Chart lookup").Range("C15")

ActiveChart.SetSourceData Source:=rng, _
PlotBy:=xlColumns

View 7 Replies View Related

Testing For Values That Vary Within Specific Tolerance?

Apr 22, 2014

I'm trying to identify where a set of values 'agree' within a specified tolerance.

I have a list of scores from different sources, and wish to both average them (easy to do) but also to identify how well they 'agree' by flagging those which have a difference above a specified tolerance. The numbers are all integers, and the tolerance will be an integer.

To give an example, I might have cells with values (2,3,2,2) and these agree within a tolerance of 1. If I had cells of (2,4,2,2) these wouldn't agree. I'd like to flag (by the creation of an 'X' within a separate column) where these cells do not agree.

I've done this previously by using chained If and Or statements (e.g. if A1 = D1 or A1 = D1+1 etc etc) but this is laborious and means I have to change logic every time I add a new sample.

Is there a way of specifying a range of cells (e.g. A1,D1,H1, J1) and seeing if the values of these cells agree to within a stated tolerance? I'm happy to define named cells to specify and argument/attribute.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved