I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
I'm trying to make a macro'd button that when clicked will select the cells A1:A?? where ?? is equal to the value in cell B1
B1 is a variable number that changes to be the proper amount of rows that I require selected.
It's always A1 down to A9 minimum and A1 down to A400 max.
Once selected I need the macro to copy the selected cells to the clipboard for another application to be able to paste that info.
So far I've been able to get the copy command to work and the range command to work but can't seem to figure out how to put the variable number from B1 into the range command.
I've made a macro and spend some time making it work across different sizes of data. The last issue I'm having is after the macro sorted out some data, that it will then delete, it has to select the first row and shift select down before deleting it. However, depending on how the data is sorted, the first row could be 9, could be 10 and so on. See below for my code.
Code: Sub Macro1() Windows("statistik.xls").Activate Range("A8").Select
[Code]....
If the first row in my data set is not one of the 3 criteria ("Personligt ejede virksomheder", "Privat", "Reklamebeskyttet"), then the first row # will be 10 instead of 9. If the first two rows are not one of the 3 criteria, then it would be row 11 and so forth. How do I make my macro take this into consideration?
I am trying to enter code into a Macro that will select a range and then put a subtotal at the bottom of the range.
I have values in col D & E that I am multiplying together in column F. I then want the macro to select a range from F2 to the last Value in col F and then put a total in the next cell down (in col F). The range needs to be variable.
I have a workbook that generates sheets for each year based on selected criteria. It starts at Column H and goes too AH and beyond. When my loop reaches Z it errors out. I think this is happening because the code is referencing the column as ASCII. Here is the
Sub Test() Dim d As Date Dim yrint, i, num_years, fields, field_start As Integer Dim yrstr, crit1, crit2, left_column_range_fixed, right_column_range_fixed, left_column_range_var, right_column_range_var, left_column_range, right_column_range, cost_column, cost_column_var, cost_column_fixed As String left_column_range_fixed = "H" right_column_range_fixed = ":AH" cost_column_fixed = "2" crit1 = "=x" crit2 = ">0" d = Date yrint = Sheets("Overall"). Range("H2") field_start = 9 'changed from 9....................
I recorded the following macro to select all the worksheets in the Activeworkbook by clicking on the first worksheet and then hitting Shift Tab and selecting the final worksheet (thus '[Group] selecting' all worksheets in the active workbook).
End Sub How do you generalise the Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select if the number and names of worksheets varies from workbook to workbook?
I want to make a range variable ("testrange") that I can use to define a range of non-continuous cells and then use that range variable to select that range of cells in different worksheets within the same workbook.
I tried the below code (simply coloring cells red), but get an error when I try to select "testrange" after moving to the next worksheet.
[Code] .....
The next worksheet is also supposed to have the same range of cells colored red, but I can only get it to work on the first active sheet.
I would like to avoid having to repeatedly rebuild the range I want selected each time I move to a different worksheet.
Issue with array that's bolded The way it is set up is to rename the 3rd sheet to MyFileName and rename the last sheet to MyFileNameTwo. The file names will remain constant. They will always be the 3rd and last sheets, but the number in between will vary. Is there anyway to select the 3rd sheet through the last sheet to delete these? When I use the array it wants sheet names but those are based on multiple variables in other workbooks.
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
I have a large table of data sorted by date and I need to get the last value for a given variable. in certain instances using LOOKUP(9.999999E+307,sheet1!A:A) works but not when I'm trying to get values for past dates
Her is an example table:
Date Month Value Variable 1/2/14 1 11
[Code]...
If i need to find the last value for the month of February, in this case 514, what combinations of formulas should I use? I feel like this should be easier than I making it out to be.
Basically have a spreadsheet to track an athletic competition going of for the purposes of a fantasy game (like fantasy football). The scores from each event are being copied and pasted into a data pages and then other pages pull from that for calculations. I'm using rankings (rank.eq equation) on a calculation tab, and then using those rankings on a leader-board tab find placement via the VLookup function. The issue I'm running into is ties, when two people are ranked the same. I've been playing with this:
Where it checks for an error in the Vlookup, if its not an error then it does the VLookup, if it is then if looks up the previous ranking and the VLookup array uses Lookup to find the position of the last rank, increments it by one and starts the new Vlookup there.
should deliver me the same values i.e changedname 123456 and true
for testarray(0),testarray(1),testarray(2) i am getting the values but I am not able to change the variable values for custname ,custaccount and worthcredit, although I am accessing the same elements.
I have a variable array, that is, the first cell of the array is variable and the last cell is variable. I have dimmed the first cell , "firstcell" as a range. I have dimmed the last cell , "lastcell" as a range. I'd like to sort the array but first I have to select all cells in the array. Need the proper syntax to select all cells between "firstcell" and "lastcell" in my macro.
Code: Dim MyArray as Variant Dim Address MyArray = Range([a1], [b10]) For varRow = 1 To UBound(MyArray, 1) ' I want to know the current address of the cell right here, ' For instance I want to know I'm working with A1 right here ' Is that possible?
Next I guess my question is how do I find out the originating address of the cell I'm working with in an array. I need to check the font color of A1,B1,C1 etc while working in that range and I have no idea how to access it.
how to do is the assignment of GoodArray1 to CurrentArrayToUse, i.e. "CurrentArrayToUse = GoodArray1" below:
Global NextArrayToUse() Global CurrentArrayToUse() Global PreviousArrayToErase() Global GoodArray1(), GoodArray2(), [etc] Global CurrentGuessNumber As Integer
[bunch of code, part of which assigns a number to CurrentGuessNumber, then the following...]
Select Case CurrentGuessNumber Case 1 CurrentArrayToUse = GoodArray1 NextArrayToUse = GoodArray2 Case 2 CurrentArrayToUse = GoodArray2 NextArrayToUse = GoodArray3 PreviousArrayToErase = GoodArray1 ReDim PreviousArrayToErase(0, 0)
I am running an array formula which is working fine except that I now need to add a further condition: that a one of a number of values in cells C1:C8 is found in range $a1:$A500. I've tried Or with comma separation and with * separations but nothing seems to work.
Is it at all possible to refer to a array that may change in a formula?
For example I need to use a Vlookup formula, however the table array will change depending on the value of another cell.
I need the user to be able to select the column heading that the lookup should work off from a drop down list. So if the user selects column heading C, the array should start from column C though it will always end at column Z. If the user selects column heading Y the array would be Y:Z.